GB 10408-2025 English PDFUS$1099.00 ยท In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 10408-2025: Intrusion and hold-up alarm systems - Intrusion detector Status: Valid GB 10408: Historical versions
Basic dataStandard ID: GB 10408-2025 (GB10408-2025)Description (Translated English): Intrusion and hold-up alarm systems - Intrusion detector Sector / Industry: National Standard Classification of Chinese Standard: A91 Classification of International Standard: 13.310 Word Count Estimation: 54,589 Date of Issue: 2025-02-28 Date of Implementation: 2026-03-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB 10408-2025: Intrusion and hold-up alarm systems - Intrusion detector---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 13.310 CCSA91 National Standard of the People's Republic of China Replace GB 10408.1~10408.5-2000, GB 10408.6-2009, etc. Intrusion and emergency alarm systems Intrusion detectors Released on 2025-02-28 2026-03-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of contentsPreface III 1 Scope 1 2 Normative references 1 3 Terms, definitions and abbreviations 1 3.1 Terms and Definitions 1 3.2 Abbreviations 2 4 Product classification, grading and labeling 3 4.1 Product categories 3 4.2 Product classification 3 4.3 Product identification 3 5 Technical Requirements 3 5.1 General requirements 3 5.2 Ultrasonic intrusion detectors, microwave intrusion detectors, passive infrared intrusion detectors 7 5.3 Glass breakage intrusion detector 8 5.4 Magnetic switch intrusion detector 9 5.5 Vibration Intrusion Detector 9 5.6 Active beam intrusion detector 10 5.7 Shielded microwave intrusion detector 10 5.8 Tension-type electronic fence intrusion detector 11 5.9 Radar Intrusion Detector 11 5.10 Other single-technology intrusion detectors 12 5.11 Composite Intrusion Detector 12 6 Product Manual 12 7 Test methods 12 7.1 Test environment 12 7.2 General requirements test 12 7.3 Ultrasonic intrusion detector, microwave intrusion detector, passive infrared intrusion detector test 15 7.4 Glass breakage intrusion detector test 29 7.5 Magnetic switch intrusion detector test 34 7.6 Vibration intrusion detector test 35 7.7 Active beam intrusion detector test 38 7.8 Shielded microwave intrusion detector test 38 7.9 Tension-type electronic fence intrusion detector test 39 7.10 Radar Intrusion Detector Test 39 7.11 Other Single-Technology Intrusion Detector Tests 40 7.12 Composite Intrusion Detector Test 40 7.13 Product manual inspection 40 8 Inspection Rules 40 8.1 Inspection categories 40 8.2 Inspection items, technical requirements, test methods and non-conforming classification 41 8.3 Batch rules 42 8.4 Sampling rules 43 8.5 Decision Rules 43 8.6 Disposal of defective products 43 8.7 Resubmission of Batch 43 9 Marking, packaging, transportation and storage 43 9.1 Sign 43 9.2 Packaging 43 9.3 Transport 43 9.4 Storage 44 Appendix A (Normative) Dimensions and requirements of standard magnets 45 References 48ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB 10408.1-2000 "Intrusion Detectors Part 1.General Requirements", GB 10408.2-2000 "Intrusion Detectors Part 2.General Requirements" GB 10408.3-2000 "Intrusion Detectors Part 3.Indoor Microwave Doppler detectors", GB 10408.4-2000 "Intrusion detectors Part 4.Active infrared intrusion detectors", GB 10408.5-2000 "Intrusion Detectors Part 5.Passive Infrared Detectors for Indoor Use", GB 10408.6-2009 "Microwave and Passive Infrared Composite Intrusion Detection GB/T 10408.8-2008 "Vibration Intrusion Detector", GB 10408.9-2001 "Intrusion Detector Part 9.Passive Intrusion Detector for Indoor Use" Glass Breakage Detector", GB 15209-2006 Magnetic Switch Intrusion Detector, GB 15407-2010 Shielded Microwave Intrusion Detector Technical Requirements, GB 10408.1-2000, GB 10408.2-2000, GB 10408.3-2000, GB 10408.4-2000, GB 10408.5-2000, GB 10408.6-2009, GB/T 10408.8-2008, GB 10408.9-2001, GB 15209-2006, Compared with GB 15407-2010, in addition to structural adjustments and editorial changes, the main technical changes are as follows. --- Added product classification, grading and labeling (see Chapter 4); --- Changed the appearance and structural requirements (see 5.1.1, 4.5 of GB 10408.4-2000, 4.3 of GB 10408.6-2009, 5.6 of GB 10408.9-2001, 5.2 of GB 15209-2006 and 4.1 of GB 15407-2010); --- Changed the requirements for enclosure protection level (see 5.1.2, 6.6 of GB 10408.1-2000, 4.5 of GB 10408.4-2000, 4.3.2 of GB 10408.6-2009 and 5.1.2 of GB/T 10408.8-2008); --- Changed the cable protection requirements (see 5.1.7, 5.1.9 of GB 10408.2-2000, 5.1.9 of GB 10408.3-2000, 5.1.8 of GB 10408.5-2000, 5.2.9 of GB/T 10408.8-2008 and 5.1.6 of GB 10408.9-2001); --- Changed the operating voltage requirements (see 5.1.8, 6.1.4 of GB 10408.1-2000, 4.5.2 of GB 10408.6-2009, 5.2.5, 5.2.6 of GB/T 10408.8-2008 and 5.1.3 of GB 10408.9-2001); --- Added event processing and signal output (see 5.1.9); --- Changed the safety requirements (see 5.1.10, 6.3 of GB 10408.1-2000, 5.3 of GB 10408.3-2000, and 5.4 of GB 10408.4- 4.4 of GB.2000, 4.11 of GB 10408.6-2009, 5.8 of GB/T 10408.8-2008, and 5.9 of GB 10408.9-2001 5.3 and 4.9 of GB 15407-2010); --- Changed the environmental adaptability requirements (see 5.1.11, 6.2 of GB 10408.1-2000, 5.2 of GB 10408.3-2000, 4.2 of GB 10408.4-2000, 5.2 of GB 10408.5-2000, 4.6 of GB 10408.6-2009, GB/T 10408.8- 2008, 5.3, GB 10408.9-2001, 5.2, GB 15209-2006, 5.4 and GB 15407-2010); --- Changed the electromagnetic compatibility requirements (see 5.1.12, 6.1.3 and 6.2 of GB 10408.1-2000, GB 10408.6-2009 4.9 of GB/T 10408.8-2008, 5.4 of GB 15407-2010); --- Changed the detection performance requirements for ultrasonic intrusion detectors, microwave intrusion detectors, and passive infrared intrusion detectors (see 5.2.1, 6.1.1~6.1.2 of GB 10408.1-2000, 5.1.1~5.1.6 of GB 10408.2-2000, and 6.1.2~6.1.3 of GB 10408.3-2000 5.1.1~5.1.6, 5.1.1~5.1.2 of GB 10408.5-2000 and 4.5.4 of GB 10408.6-2009); ---Added ultrasonic intrusion detectors, microwave intrusion detectors, passive infrared intrusion detectors, glass breakage intrusion detectors, magnetic switch Requirements for anti-magnetic field interference of intrusion detectors and vibration intrusion detectors (see 5.2.2.4, 5.3.2.4, 5.4.2, 5.5.2.3); --- Changed the detection performance requirements of glass breakage intrusion detectors (see 5.3.1, 5.1.1 of GB 10408.9-2001); --- Changed the anti-interference requirements for glass breakage intrusion detectors (see 5.3.2, 5.1.1 of GB 10408.9-2001 and GB 10408.9- 2001, 5.1.5); --- Changed the detection gap requirements for magnetic switch intrusion detectors (see 5.4.1, 5.3.1 of GB 15209-2006); --- Added technical requirements for fiber optic vibration intrusion detectors (see 5.5.1); --- Changed some of the performance requirements for active beam intrusion detectors (see 5.6, 4.1 of GB 10408.4-2000); --- Changed the performance requirements and functional requirements of shielded microwave intrusion detectors (see 5.7, see 4.2~4.4 of GB 15407-2010); --- Added technical requirements for tension-type electronic fence intrusion detectors (see 5.8); --- Added technical requirements for radar intrusion detectors (see 5.9); --- Added other single technology intrusion detector technical requirements (see 5.10); --- Added technical requirements for composite intrusion detectors (see 5.11); --- Deleted the enhanced and optional requirements (see 6.9 of GB 10408.1-2000, 5.9 of GB 10408.2-2000, and GB 10408.3- 2000, 5.9 and GB 10408.9-2001, 5.9); --- Deleted the walking test indicator requirements (see 5.7 of GB 10408.2-2000, 5.7 of GB 10408.3-2000, 5.7 of GB 10408.5-2000 and 4.5.3 of GB 10408.6-2009); --- Deleted the requirements for resistance to small (animal) targets (see 5.1.3 of GB 10408.5-2000 and 4.8.2 of GB 10408.6-2009); --- Deleted the requirements for resistance to background temperature changes (see 5.1.4 of GB 10408.5-2000); --- Deleted the requirements for environmental interference resistance (see 4.8.3 of GB 10408.6-2009); --- Deleted the durability requirements (see 4.10 of GB 10408.6-2009, 5.6 of GB/T 10408.8-2008, GB 15209- 2006, 5.6 and GB 15407-2010, 4.8); --- Deleted the installation requirements for glass breakage intrusion detector test equipment (see 5.10 of GB 10408.9-2001); --- Deleted the general requirements for magnetic switch intrusion detectors, contact resistance requirements, insulation resistance requirements, contact overload requirements, and demagnetization resistance requirements (See 5.1, 5.3.2, 5.3.3, 5.3.5 and 5.3.6 of GB 15209-2006); --- Changed the product manual requirements (see Chapter 6, 6.8 of GB 10408.1-2000, 5.8 of GB 10408.2-2000, 5.8 of GB 10408.3-2000, 5.8 of GB 10408.5-2000 and 5.8 of GB 10408.9-2001). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed and coordinated by the Ministry of Public Security of the People's Republic of China. The previous versions of this document and the documents it replaces are as follows. ---First issued in 1989 as GB 10408.1-1989 and first revised in.2000; ---First issued in 1989 as GB 10408.2-1989 and first revised in.2000; ---First issued as GB 10408.3-1989 in 1988 and first revised in.2000; ---First issued in 1989 as GB 10408.4-1989 and first revised in.2000; ---First issued in 1989 as GB 10408.5-1989 and first revised in.2000; ---First published in.1991 as GB 10408.6-1991, first revised in.2009; ---First published in.1997 as GB/T 10408.8-1997, first revised in.2008; ---First published in.2001 as GB 10408.9-2001; --- First issued as GB 15209-1994 in.1994 and first revised in.2006; ---First issued in.1994 as GB 15407-1994, first revised in.2010; --- This is the second revision of GB 10408.1-2000, GB 10408.2-2000, GB 10408.3-2000, GB 10408.4- 2000, GB 10408.5-2000, GB 10408.6-2009, GB/T 10408.8-2008, GB 10408.9-2001, The requirements for products within the scope of GB 15209-2006 and GB 15407-2010 are unified and some invasive Detector products. Intrusion and emergency alarm systems Intrusion detectors1 ScopeThis document specifies the product classification, grading and identification, technical requirements, product Instructions, marking, packaging, transportation and storage requirements, establish inspection rules and describe test methods. This document applies to the design, manufacture and inspection of intrusion detectors in intrusion and emergency alarm systems.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 2828.1 Sampling procedures for inspection by attributes Part 1.Sampling plans for batch inspection based on the acceptance quality limit (AQL) GB/T 4208-2017 Enclosure protection degree (IP code) GB/T 9254.1 Electromagnetic compatibility of information technology equipment, multimedia equipment and receivers Part 1.Emission requirements GB/T 15211 Environmental adaptability requirements and test methods for security alarm equipment GB 16796 Safety requirements and test methods for security alarm equipment GB/T 30148 Electromagnetic compatibility immunity requirements and test methods for security alarm equipment GB/T 32581-2016 Technical requirements for intrusion and emergency alarm systems 3 Terms, definitions and abbreviations 3.1 Terms and Definitions The terms and definitions defined in GB/T 32581-2016 and the following apply to this document. 3.1.1 intrusion detector A device that detects, responds to, and generates an intrusion alarm status for intrusions within the detectable range. Note. An intrusion detector consists of one device or multiple devices. [Source. GB/T 32581-2016, 3.1.29, modified] 3.1.2 Sensor A component of an intrusion detector that senses a certain physical quantity within the detectable range and converts it into an electrical signal. 3.1.3 processor An intrusion detector component that analyzes and processes the sensor output signal. 3.1.4 The microwave is transmitted into the detectable range and the echo is received, which senses the movement of human body or object within the detectable range and generates an intrusion alarm state. Intrusion detection device. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 10408-2025_English be delivered?Answer: Upon your order, we will start to translate GB 10408-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB 10408-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB 10408-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB 10408-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 10408-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
