GB/T 14506.11-2010 English PDF

US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14506.11-2010: Methods for chemical analysis of silicate rocks -- Part 11: Determination of potassium oxide and sodium oxide content
Status: Valid

GB/T 14506.11: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 14506.11-2010	229	Add to Cart	3 days	Methods for chemical analysis of silicate rocks -- Part 11: Determination of potassium oxide and sodium oxide content	Valid
GB/T 14506.11-1993	239	Add to Cart	2 days	Sillicate rocks. Determination of potassium oxide and sodium oxide	Obsolete

Similar standards

YB/T 4019   GB/T 5195.1   GB/T 5195.12   GB/T 14506.13   GB/T 14506.14   GB/T 14506.12   

Basic data

Standard ID: GB/T 14506.11-2010 (GB/T14506.11-2010)
Description (Translated English): Methods for chemical analysis of silicate rocks -- Part 11: Determination of potassium oxide and sodium oxide content
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: D53
Classification of International Standard: 73.080
Word Count Estimation: 10,185
Date of Issue: 2010-11-10
Date of Implementation: 2011-02-01
Older Standard (superseded by this standard): GB/T 14506.11-1993
Quoted Standard: GB/T 6682; GB/T 14506.1
Regulation (derived from): National Standard Approval Announcement 2010 No.8 (Total No.163)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the method for the determination of sodium hydroxide and oxide content of silicate rocks. This section applies to the determination of the amount of sodium hydroxide and oxide in silicate rocks. This section also applies to the measurement of soil and stream sediment in the amount of sodium hydroxide and oxide. Measuring range: flame photometry, 0. 5% to 20 % of the amount of sodium hydroxide or oxide, flame atomic absorption spectrophotometry, 0. 05% to 8% of the amount of sodium hydroxide or oxide.

GB/T 14506.11-2010: Methods for chemical analysis of silicate rocks -- Part 11: Determination of potassium oxide and sodium oxide content

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Methods for chemical analysis of silicate rocks Part 11. Determination of potassium oxide and sodium oxide content ICS 73.080 D53 National Standards of People's Republic of China Replacing GB/T 14506.11-1993 Silicate rocks - Part 11. Determination of the amount of sodium hydroxide and oxide Part 11. Determinationofpotassiumoxideandsodiumoxidecontent Issued on. 2010-11-10 2011-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 14506 "Methods for chemical analysis of silicate rocks" 30 consists of the following components. --- Part 1. Determination of water absorption; --- Part 2. Determination of combined water; --- Part 3. Determination of the amount of silica; --- Part 4. Determination of the amount of aluminum oxide; --- Part 5. Determination of total iron content; --- Part 6. Determination of calcium oxide content; --- Part 7. Determination of the amount of magnesium oxide; --- Part 8. Determination of the amount of titanium dioxide; --- Part 9. Determination of the amount of phosphorus pentoxide; --- Part 10. Determination of the amount of manganese oxide; --- Part 11. Determination of the amount of sodium hydroxide and oxide; --- Part 12. Determination of the amount of fluorine; --- Part 13. Determination of sulfur content; --- Part 14. Determination of ferrous oxide; --- Part 15. Determination of the amount of lithium; --- Part 16. Determination of the amount of rubidium; --- Part 17. Determination of the amount of strontium; --- Part 18. Determination of copper content; --- Part 19. Determination of lead content; --- Part 20. Determination of the amount of zinc; --- Part 21. Determination of the amount of nickel and cobalt; --- Part 22. Determination of the amount of vanadium; --- Part 23. Determination of chromium; --- Part 24. Determination of cadmium content; --- Part 25. Determination of molybdenum and tungsten; --- Part 26. Determination of cobalt content; --- Part 27. Determination of nickel content; --- Part 28. Determination of the amount of 16 major and minor components; Part --- 29. 22 the amount of rare earth element determination; --- Part 30. Determination of the amount of 44 elements. This section GB/T Part of 1,114,506. This Part replaces GB/T 14506.11-1993 "Silicate rocks - Determination of potassium oxide and sodium oxide." Section compared with the GB/T 14506.11-1993 main change this as follows. --- Increasing the normative references; --- Increased alert, warnings; --- The weighed sample quantity and dispensing solutions to a list representation. This section presents the People's Republic of China Ministry of Land Resources. This part of the National Standardization Technical Committee under the jurisdiction of Land and Resources. This section is responsible for drafting. National geology test center. Drafting this Part. Geology and Mineral Resources of Heilongjiang Institute of Applied test. The main drafters of this section. Xingyun Qiu, Ge Yanmei, Pan River. This part of the standard replaces the previous editions are. --- GB/T 14506.11-1993. Silicate rocks - Part 11. Determination of the amount of sodium hydroxide and oxide Warning --- Use this section shall be a person experiences regular laboratory work. This section does not point out all possible security asked question. Users have the responsibility to take appropriate safety and health practices and to ensure compliance with the conditions relevant national regulations.

1 Scope

GB/T 14506 provisions of this part of the determination of sodium oxide and potassium silicate rock volume. This section applies to the determination of silicate rocks hydroxide and sodium oxide amount is also applicable to soil and stream sediments hydroxide and oxygen Determination of the amount of sodium. Measuring range. flame photometry, 0.5% to 20% of the amount of sodium hydroxide or oxide. Flame atomic absorption spectrophotometry 0.05% 8% of the amount of sodium hydroxide or oxide.

2 Normative references

The following documents contain provisions which, through reference GB/T 14506 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. Laboratory use specifications and test methods GB/T 6682 Analysis GB/T 14506.1 Silicate rocks - Part 1. Determination of water adsorption

3 flame photometry

3.1 Principle Sample with hydrofluoric acid, sulfuric acid decomposition, make a 1% solution of nitric acid in the flame photometer, potassium with 766nm, 589nm filter with sodium Rays in the air - acetylene flame measured absorbance, calculate the amount of potassium oxide and sodium. 3.2 Reagents Unless otherwise stated in this section are consistent with the use of analytical reagent and GB/T 6682 analytical laboratory use in the analysis. 3.2.1 hydrofluoric acid (ρ1.15g/mL). Warning --- toxic and corrosive hydrofluoric acid, the operation should wear gloves to prevent skin contact. 3.2.2 sulfuric acid (11). 3.2.3 nitric acid (11). 3.2.4 hydroxide standard solution. a) standard stock solution of potassium hydroxide (1.00mg/mL). Weigh 1.5829g burning High Purity 2h through 500 ℃ ~ 600 ℃ Potassium (KCl), placed in a beaker, dissolved in water and transferred to 1000mL volumetric flask, dilute to the mark, shake; b) potassium standard solution (100.0μg/mL). dispensing 20.0mL hydroxide standard solution [3.2.4a)], set 200mL Volumetric flask, dilute to the mark, shake. 3.2.5 sodium hydroxide standard solution. a) standard stock solution of sodium hydroxide (1.00mg/mL). Weigh 1.8859g after 500 ℃ ~ 600 ℃ burning of high-purity chlorine 2h Sodium (NaCl), placed in a beaker, dissolved in water and transferred to 1000mL volumetric flask, dilute to the mark, shake; b) sodium hydroxide standard solution (100.0μg/mL). dispensing 20.0mL standard solution of sodium hydroxide [3.2.5a)], set 200mL Volumetric flask, dilute to the mark, shake. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 14506.11-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 14506.11-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 14506.11-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 14506.11-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 14506.11-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14506.11-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.