GB/T 12613.4-2011 English PDF

US$134.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 12613.4-2011: Plain bearings -- Wrapped bushes -- Part 4: Materials
Status: Valid

GB/T 12613.4: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 12613.4-2011	134	Add to Cart	3 days	Plain bearings -- Wrapped bushes -- Part 4: Materials	Valid
GB/T 12613.4-2002	279	Add to Cart	3 days	Plain bearings -- Wrapped bushes -- Part 4: Materials	Obsolete

Similar standards

GB/T 18329.1   GB/T 2889.6   GB/T 35087   GB/T 12613.3   GB/T 12613.5   GB/T 12613.2   

Basic data

Standard ID: GB/T 12613.4-2011 (GB/T12613.4-2011)
Description (Translated English): Plain bearings -- Wrapped bushes -- Part 4: Materials
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J12
Classification of International Standard: 21.100.10
Word Count Estimation: 7,779
Date of Issue: 2011-12-30
Date of Implementation: 2012-10-01
Older Standard (superseded by this standard): GB/T 12613.4-2002
Quoted Standard: GB/T 12613.1-2011; ISO 3547-2; ISO 3547-3; ISO 4378-1; ISO 4382-2; ISO 4383; ISO 4384-1; ISO 4384-2
Adopted Standard: ISO 3547-4-2006, IDT
Regulation (derived from): Announcement of Newly Approved National Standards No. 23 of 2011
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the line with GB/T 12613 other parts required for the manufacture of roll sleeve single and multilayer bearing material.

GB/T 12613.4-2011: Plain bearings -- Wrapped bushes -- Part 4: Materials

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
. Plain bearings Wrapped bushes Part 4. Materials ICS 21.100.10 J12 National Standards of People's Republic of China Replacing GB/T 12613.4-2002 Plain bearings - Wrapped bushes - Part 4. Materials (ISO 3547-4.2006, IDT) Issued on. 2011-12-30 2012-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 12613 "Plain bearings - hub" consists of the following seven parts. --- Part 1. Dimensions; --- Part 2. outside and inside diameter of the test data; --- Part 3. Lubrication holes, grooves and pockets; --- Part 4. Materials; --- Part 5. diameter test; --- Part 6. inner diameter of the test; --- Part 7. Measurement of wall thickness of thin-walled sleeve. This section is GB/T Part of 412,613. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB/T 12613.4-2002 "Plain bearings - Wrapped bushes - Part 4. Materials." And GB/T 12613.4-2002 Compared main changes are as follows. --- Chapter 2 increases references ISO 4378-1; --- Increase in Chapter 3, "Terms and Definitions"; --- Table 1 increase applies wall thicknesses series; --- Table 2 delete material grades PbSb15SnAs, increased material grades AlSn12SiCu, AlZn5 and code B1, B2, D1, D2, D3, D4. --- Table 2 increase the variety of material grades applicable to wall thicknesses series; --- Table 2 Table Note increase Brinell hardness test different methods of steel backing material applies. This section uses the translation method identical with the international standard ISO 3547-4.2006 "Plain bearings - Wrapped bushes - Part 4. Materials." Consistency correspondence between this part of international documents and normative references of our files are as follows. --- GB/T 2889.1-2008 Plain bearings - Terms, definitions and classification - Part 1. Design, bearing materials and their properties (ISO 4378-1.1997, IDT) --- GB/T 12613.2-2011 Plain bearings - Wrapped bushes - Part 2. outside and inside diameter of the test data (ISO 3547-2. 2006, IDT) --- GB/T 12613.3-2011 Plain bearings - Wrapped bushes - Part 3. Lubrication holes, grooves and indentations (ISO 3547-3. 2006, IDT) --- GB/T 18326-2001 Plain bearings thin wall bearing metal multilayer material (eqv ISO 4383.2000) And ISO 3547-4.2006 as compared to this section made the following editorial changes. --- Equivalents adoption of international standards in place of the standard corresponding to international standards. This part is proposed by China Machinery Industry Federation. Bearing this in part by the National Standardization Technical Committee (SAC/TC236) centralized. This section is responsible for drafting unit. Productivity Promotion Center in the machine. Participated in the drafting of this section. Zhejiang Changsheng Sliding Bearings Co., Ltd., Zhejiang SF Oilless Bearing Co., Ltd., Zhejiang Bearing Co., Ltd., Bearing Co., Ltd. Jiashan Feng into three complex. This part of the standard replaces the previous editions are. --- GB/T 12613-1990; --- GB/T 12613.4-2002. Plain bearings - Wrapped bushes - Part 4. Materials

1 Scope

GB/T 12613 provisions of this section in line with GB/T 12613 other parts of the provisions, for the manufacture of roll sleeve single and multilayer Sliding bearing material.

2 Normative references

The following documents for the use of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 12613.1-2011 Plain bearings - Wrapped bushes - Part 1. Dimensions (ISO 3547-1.2006, IDT) ISO 3547-2 Plain bearings - Wrapped bushes - Part 2. outside and inside diameter of the test data (Plainbearings-Wrapped bushes-Part 2. Testdataforoutsideandinsidediameters) ISO 3547-3 Plain bearings - Wrapped bushes - Part 3. Lubrication holes, grooves and pockets (Plainbearings-Wrapped bushes-Part 3. Lubricationholes, groovesandindentations) ISO 4378-1 Plain bearings - Terms, definitions, classification and symbols - Part 1. Design, bearing materials and their properties (Plain bearings-Terms, definitions, classificationandsymbols-Part 1. Design, bearingmaterialsandtheir properties) ISO 4382-2 bearing copper alloys - Part 2. Single bearing forged copper alloy (Plainbearings-Copper aloys-part2. wroughtcopperaloysforsolidplainbearings) ISO 4383 Plain bearings thin wall bearing metal multilayer material (Plainbearings-Multilayermaterialsfor thin-waledplainbearings) ISO 4384-1 Plain bearings bearing alloy hardness test - Part 1. multi-layer material (Plainbearings-Hardness testingofbearingmetals-Part 1. Compoundmaterials) ISO 4384-2 Plain bearings bearing alloy hardness test - Part 2. single layer of material (Plainbearings-Hardness testingofbearingmetals-Part 2. Solidmaterials)

3 Terms and Definitions

Terms and definitions, as defined in ISO 4378-1 apply to this document.

4 Requirements

4.1 Chemical Analysis Chemical analysis is a sliding bearing alloys final acceptance procedures. Arbitration inspection or random sample testing should be used to identify the manufacturer and user consultation Available methods. 4.2 Hardness Table 1 and Table 2 gives the average hardness value related to each material. Practical application, change the alloy composition and material processing technology The hardness of the material has a great influence. Hardness value requires the manufacturer shall, in consultation with users. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 12613.4-2011_English be delivered?

Answer: Upon your order, we will start to translate GB/T 12613.4-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 12613.4-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 12613.4-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 12613.4-2011?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 12613.4-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.