Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 12613.3-2011 English PDF

Q: How long will the true-PDF of English version of GB/T 12613.3-2011 be delivered?

Upon your order, we will start to translate GB/T 12613.3-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Q: Can I share the purchased PDF of GB/T 12613.3-2011_English with my colleagues?

Yes. The purchased PDF of GB/T 12613.3-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Q: Does the price include tax/VAT?

Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries). Avoidance of Double Taxation Agreements (DTAs) between Singapore and 100+ Countries: https://www.iras.gov.sg/taxes/international-tax

Q: Do you accept my currency other than USD?

Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Q: Should I purchase the latest version GB/T 12613.3-2011?

Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 12613.3-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

US$274.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 12613.3-2011: Plain bearings -- Wrapped bushes -- Part 3: Lubrication holes, grooves and indentations
Status: Valid

GB/T 12613.3: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 12613.3-2011	274	Add to Cart	3 days	Plain bearings -- Wrapped bushes -- Part 3: Lubrication holes, grooves and indentations	Valid
GB/T 12613.3-2002	359	Add to Cart	3 days	Plain bearings -- Wrapped bushes -- Part 3: Lubrication holes, lubrication grooves and lubrication indentations	Obsolete

Similar standards

GB/T 18329.1 GB/T 2889.6 GB/T 35087 GB/T 12613.4 GB/T 12613.5 GB/T 12613.2

Basic data

Standard ID: GB/T 12613.3-2011 (GB/T12613.3-2011)
Description (Translated English): Plain bearings -- Wrapped bushes -- Part 3: Lubrication holes, grooves and indentations
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J12
Classification of International Standard: 21.100.10
Word Count Estimation: 14,158
Date of Issue: 2011-12-30
Date of Implementation: 2012-10-01
Older Standard (superseded by this standard): GB/T 12613.3-2002
Quoted Standard: GB/T 12613.1-2011; ISO 4378-1
Adopted Standard: ISO 3547-3-2006, IDT
Regulation (derived from): National Standard Approval Announcement 2011 No.23
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the sliding sleeve bearings-single and multi-layered bearing lubrication holes material, grooves and pockets size.

GB/T 12613.3-2011: Plain bearings -- Wrapped bushes -- Part 3: Lubrication holes, grooves and indentations

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plain bearings Wrapped bushes Part 3. Lubrication holes, grooves and indentations ICS 21.100.10 J12 National Standards of People's Republic of China Replacing GB/T 12613.3-2002 Plain bearings - Wrapped bushes Part 3. Lubrication holes, grooves and pockets Part 3. Lubricationholes, groovesandindentations (ISO 3547-3.2006, IDT) Issued on. 2011-12-30 2012-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 12613 "Plain bearings - hub" consists of the following seven parts. --- Part 1. Dimensions; --- Part 2. outside and inside diameter of the test data; --- Part 3. Lubrication holes, grooves and pockets; --- Part 4. Materials; --- Part 5. diameter test; --- Part 6. inner diameter of the test; --- Part 7. Measurement of wall thickness of thin-walled sleeve. This part of GB/T 12613 Part 3. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB/T 12613.3-2002 "Plain bearings - Wrapped bushes - Part 3. Lubrication holes, lubrication grooves and lubrication hole". Compared with GB/T 12613.3-2002, the main changes are as follows. --- Chapter 2 delete references GB/T 12613.2-2002, GB/T 12613.4-2002; --- Increase in Chapter 4, "Symbols and units"; --- Increase in Chapter 5, "Overview"; --- Increasing the N1 type oil hole depth limit deviations (see Table 7); --- Increased N3 lubricants hole pattern (see 8.4); --- Increased Chapter 9 "mark." This section uses the translation method identical with the international standard ISO 3547-3.2006 section "sliding bearings - Wrapped bushes 3. Lubrication Holes, grooves and pockets. " Consistency correspondence between this part of international documents and normative references of our files are as follows. --- GB/T 2889.1-2008 Plain bearings - Terms, definitions and classification - Part 1. Design, bearing materials and their properties (ISO 4378-1.1997, IDT). And ISO 3547-3.2006 as compared to this section made the following editorial changes. --- To increase the range. "Note 2. Except otherwise specified and the specified unit, GB/T 12613 in this section All dimensions in mm Meter. "Delete the text on the table," millimeters "; --- Equivalents adoption of international standards in place of the standard corresponding to international standards. This part is proposed by China Machinery Industry Federation. Bearing this in part by the National Standardization Technical Committee (SAC/TC236) centralized. This section is responsible for drafting unit. Productivity Promotion Center in the machine. Participated in the drafting of this section. Zhejiang Changsheng Sliding Bearings Co., Ltd., Zhejiang SF Oilless Bearing Co., Ltd., Zhejiang Bearing Co., Ltd., Bearing Co., Ltd. Jiashan Feng into three complex. This part of the standard replaces the previous editions are. --- GB/T 12613-1990; --- GB/T 12613.3-2002. Plain bearings - Wrapped bushes Part 3. Lubrication holes, grooves and pockets

1 Scope

GB/T 12613 provisions of this part of the lubrication holes Single- and multi-bearing material Plain bearings - bushes, grooves and Oil hole size. Note 1. Lubrication holes, grooves and pockets in line with the provisions of this part of the rolling bush, dimensions and materials shall conform to GB/T 12613.1 and GB/T 12613.4 Provisions. Note 2. In addition to the marked and designated special units, GB/T 12613 in this section All dimensions are in millimeters.

2 Normative references

The following documents for the use of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 12613.1-2011 Plain bearings - Wrapped bushes - Part 1. Dimensions (ISO 3547-1.2006, IDT) ISO 4378-1 Plain bearings - Terms, definitions and classification - Part 1. Design, bearing materials and their properties (Plainbearings- Terms, definitionsandclassification-Part 1. Design, bearingmaterialsandtheirproperties)

3 Terms and Definitions

Terms and definitions, as defined in ISO 4378-1 apply to this document.

4 Symbols and units

Symbols and units used in this section are shown in Table 1. Table 1 Symbols and units Symbol Description Unit B bush width mm c diamond lubricant pockets side length mm Di mm inner diameter of the sleeve db lubricant hole diameter mm dL lubricant hole diameter mm Do sleeve diameter mm e lubrication groove spacing mm n1, n2 lubricating groove width mm R Radius mm ......

Image

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 12613.3-2011_English be delivered?

Answer: Upon your order, we will start to translate GB/T 12613.3-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 12613.3-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 12613.3-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 12613.3-2011?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 12613.3-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.