GB/T 12613.1-2011 English PDF

US$314.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 12613.1-2011: Plain bearings -- Wrapped bushes -- Part 1: Dimensions
Status: Valid

GB/T 12613.1: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 12613.1-2011	314	Add to Cart	3 days	Plain bearings -- Wrapped bushes -- Part 1: Dimensions	Valid
GB/T 12613.1-2002	399	Add to Cart	3 days	Plain bearings -- Wrapped bushes -- Part 1: Dimensions	Obsolete
GB/T 12613-1990	599	Add to Cart	4 days	Plain bearings--Wrapped bushes	Obsolete

Similar standards

GB/T 18329.1   GB/T 2889.6   GB/T 35087   GB/T 12613.4   GB/T 12613.5   GB/T 12613.3   

Basic data

Standard ID: GB/T 12613.1-2011 (GB/T12613.1-2011)
Description (Translated English): Plain bearings -- Wrapped bushes -- Part 1: Dimensions
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J12
Classification of International Standard: 21.100.10
Word Count Estimation: 16,141
Date of Issue: 2011-12-30
Date of Implementation: 2012-10-01
Older Standard (superseded by this standard): GB/T 12613.1-2002
Quoted Standard: GB/T 12613.2-2011; ISO 3547-4; ISO 4288; ISO 4378-1; ISO 12301; ISO 13715
Adopted Standard: ISO 3547-1-2006, IDT
Regulation (derived from): National Standard Approval Announcement 2011 No.23
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the monolayer and multilayer bearing material rolling cylinder sleeve and flange dimensions and markings.

GB/T 12613.1-2011: Plain bearings -- Wrapped bushes -- Part 1: Dimensions

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
. Plain bearings Wrapped bushes Part 1. Dimensions ICS 21.100.10 J12 National Standards of People's Republic of China Replacing GB/T 12613.1-2002 Plain bearings - Wrapped bushes - Part 1. Dimensions (ISO 3547-1.2006, IDT) Issued on. 2011-12-30 2012-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 12613 "Plain bearings - hub" consists of the following seven parts. --- Part 1. Dimensions; --- Part 2. outside and inside diameter of the test data; --- Part 3. Lubrication holes, grooves and pockets; --- Part 4. Materials; --- Part 5. diameter test; --- Part 6. inner diameter of the test; --- Part 7. Measurement of wall thickness of thin-walled sleeve. This part of GB/T 12613 Part 1. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB/T 12613.1-2002 "Plain bearings - Wrapped bushes - Part 1. Dimensions." And GB/T 12613.1-2002 Compared main changes are as follows. --- Increase the Chapter 4, "Symbols and units"; --- Increasing the wall thickness of 0.5mm, and gives its inner and outer chamfering chamfering limit deviation; --- Increasing the inner diameter of 2mm, 3mm, 5mm, 7mm, 17mm, 37mm; --- Bushings increased width 3mm, 5mm, 7mm, 115mm; --- Increased Table 3 "flanged bushings preferred nominal dimensions and limit deviations"; --- Increasing the wall thickness tolerance series "Series E"; --- Remove the multilayer metal material of steel back bushings thickness deviation limit provisions (2002 Version 3 tables, 5 tables in this edition); --- Increasing the outer diameter larger than 180mm diameter limit deviation; --- Increasing the inner diameter of 4mm or less in size, the bearing bore tolerance class H6; --- Adjusting sleeve marking requirements. This section uses the translation method identical with the international standard ISO 3547-1.2006 "Plain bearings - Wrapped bushes - Part 1. Dimensions." Consistency correspondence between this part of international documents and normative references of our files are as follows. --- GB/T 2889.1-2008 Plain bearings - Terms, definitions and classification - Part 1. Design, bearing materials and their properties (ISO 4378-1.1997, IDT) Regular outline law assessment of surface texture (GPS) Surface texture --- GB/T 10610-2009 Geometrical product specifications And method (ISO 4288.1996, IDT) --- GB/T 12613.4-2011 Plain bearings - Wrapped bushes - Part 4. Materials (ISO 3547-4.2006, IDT) --- GB/T 19096-2003, Technical Drawing edges of undefined shape terminology and injection method (ISO 13715.2000 Technicaldrawings-Edgesofundefinedshape-Vocabularyandindication, IDT) --- 27939-2011 sliding bearing geometrical and material quality characteristics of quality GB/T control techniques and inspection (ISO 12301. 2007, IDT) For ease of use, this section made the following editorial changes. --- To increase the range. "Note. Except otherwise specified and the specified unit, GB/T 12613 in this section All dimensions in mm Meter. "Delete the text on the table," millimeters "; --- The International Standard ISO 4288 normative reference into this part of the normative references list; --- Equivalents adoption of international standards in place of the standard corresponding to international standards; --- Chapter 5 will see the standard ISO 3547-6 placed by reference. This part is proposed by China Machinery Industry Federation. Bearing this in part by the National Standardization Technical Committee (SAC/TC236) centralized. This section is responsible for drafting unit. Productivity Promotion Center in the machine. Participated in the drafting of this section. Zhejiang Changsheng Sliding Bearings Co., Ltd., Zhejiang SF Oilless Bearing Co., Ltd., Zhejiang Bearing Co., Ltd., Bearing Co., Ltd. Jiashan Feng into three complex. This part of the standard replaces the previous editions are. --- GB/T 12613-1990; --- GB/T 12613.1-2002. Plain bearings - Wrapped bushes - Part 1. Dimensions

1 Scope

GB/T 12613 provisions of this part of the single and multilayer bearing material rolling cylinder sleeve and flange dimensions and marking. Note. Except otherwise specified and the specified unit, GB/T 12613 in this section All dimensions are in millimeters.

2 Normative references

The following documents for the use of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 12613.2-2011 Plain bearings - Wrapped bushes - Part 2. outside and inside diameter of the test data (ISO 3547-2. 2006, IDT) ISO 3547-4 Plain bearings - Wrapped bushes - Part 4. Materials (Plainbearings-Wrappedbushes-Part 4. Materials) (GPS) Surface structure ISO 4288 Geometrical product specifications. Profile method - Rules and procedures for evaluation of the surface structure (GeometricalProductSpecifications (GPS) -Surfacetexture. Profilemethod-Rulesandprocedures fortheassessmentofsurfacetexture) ISO 4378-1 Plain bearings - Terms, definitions and classification - Part 1. Design, bearing materials and their properties (Plainbearings- Terms, definitionsandclassification-Part 1. Design, bearingmaterialsandtheirproperties) Quality ISO 12301 bearing geometrical and material quality characteristics of control and inspection (Plainbearings-Quality controltechniquesandinspectionofgeometricalandmaterialqualitycharacteristics) ISO 13715 Technical drawings edges of undefined shape terminology and injection method (Technicaldrawings-Edgesof undefinedshape-Vocabularyandindications)

3 Terms and Definitions

Terms and definitions, as defined in ISO 4378-1 apply to this document.

4 Symbols and units

Symbols and units used in this section are shown in Table 1. Table 1 Symbols and units Symbol Description Unit B bush width mm Ci fillet mm Co outer chamfering mm ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 12613.1-2011_English be delivered?

Answer: Upon your order, we will start to translate GB/T 12613.1-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 12613.1-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 12613.1-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 12613.1-2011?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 12613.1-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.