Path: Home > GB/T > Page269 > GB/T 11030-2008

Price & Delivery

US$229.00 · In stock · Download in 9 seconds
GB/T 11030-2008: Characteristics of rod ceramic insulators for a.c. contact system of electrified railways
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

Std ID	Version	USD	Buy	Deliver [PDF] in	Title (Description)
GB/T 11030-2008	English	229	Add to Cart	3 days [Need to translate]	Characteristics of rod ceramic insulators for a.c. contact system of electrified railways
GB 11030-2000	English	439	Add to Cart	4 days [Need to translate]	Loss of bulk petroleum liquid products
GB 11030-1989	English	RFQ	ASK	3 days [Need to translate]	Anti-pollution type rod porielain insulators for the contact networks of railway a. c traction system

GB/T 11030-2008: Characteristics of rod ceramic insulators for a.c. contact system of electrified railways

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Characteristics of rod ceramic insulators for accontact system of electrified railways ICS 29.080.10 K48 National Standards of People's Republic of China Replacing GB 11030-2000 Exchange of electrified railway catenary with Rod porcelain insulators Characteristics Posted 2008-06-30 2009-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard replaces GB 11030-2000 "ac traction lines with porcelain insulators Rod" in size and features section. This standard compared with GB 11030-2000 in the size and nature of the content main changes are as follows. --- Increasing the mechanical failing load 12kN and 16kN level two varieties, delete the tunnel with hanging and positioning of two formula Species; --- Creepage distances former 1000mm, 1200mm and 1500mm three kinds of change 1200mm, 1400mm and 1600mm Three kinds; --- Remove the original standard in Appendix A "method of measuring the quality and appearance of the glaze layer semiconductor resistance" content added "Insulators cantilever Jack location of the pin "content; --- Remove the original standard Appendix B "transitional insulator main dimensions and characteristics of the" content, increase the "old model, said insulator party Law "content. This standard should be GB/T 1001.1-2003 "nominal high voltage overhead line insulators above 1000V - Part 1. System AC Ceramic or glass insulator element definitions, test methods and acceptance criteria "used in conjunction. Appendix A of this standard and Appendix B is an informative annex. The standard proposed by China Electrical Equipment Industrial Association. This standard by the National Standardization Technical Committee Insulators (SAC/TC80) centralized. This standard was drafted. Xi'an Institute of Electric Porcelain, Third Railway Survey and Design Institute, Suzhou Cichang like. The main drafters of this standard. Dingjing Ling, Guo Wei Gong, Lu Chau. This standard replaces the standards previously issued as follows. --- GB 11030-1989, GB 11030-2000. Exchange of electrified railway catenary with Rod porcelain insulators Characteristics

1 Scope

This standard applies to nominal voltage of 25kV, AC single-phase power frequency electric railway catenary Rod porcelain insulators (hereinafter referred to as absolute Edge sub). This standard applies to light-polluted area, heavy polluted area and high altitudes catenary cantilever supporting insulators. This standard specifies the characteristics of electrical insulators, mechanical properties and dimensional characteristics (see Table 1). This standard also specifies the insulator model and methods of marking. Note 1. A general definition, test method GB/T 1001.1-2003 in. Note 2. GB/T 1001.1-2003, the term "electric traction lines" with this standard, the term "railway electrification" has the same meaning.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 1001.1-2003 nominal voltage above 1000V Insulators for overhead lines - Part 1. Ceramic or glass AC system Glass insulator element definitions, test methods and acceptance criteria (IEC 60383-1.1993, MOD)

3 models and signs

How to order. Exchange of electrified railway catenary Rod porcelain insulators Minimum bending failing load (digital)/kN D represents a single insulated, S indicates double insulation Lightning impulse withstand voltage (digital)/kV  The minimum nominal creepage distance (Digital)/mm For example, Q12S-310/1600, he said. Q --- AC electrified railway catenary Rod porcelain insulators; 12 --- minimum bending failure load 12kN; S --- double insulated; 310 --- lightning impulse withstand voltage 310kV; 1600 --- The minimum nominal creepage distance of 1600mm. 4 electrical, mechanical and dimensional characteristics This standard specifies the following characteristics. --- Minimum mechanical failing load; ...