GB/T 10826.4-2008 English PDFUS$194.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 10826.4-2008: Fuel injection equipment -- Vocabulary -- Part 3: Unit injectors Status: Valid
Basic dataStandard ID: GB/T 10826.4-2008 (GB/T10826.4-2008)Description (Translated English): Fuel injection equipment -- Vocabulary -- Part 3: Unit injectors Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J94 Classification of International Standard: 27.020 Word Count Estimation: 10,143 Date of Issue: 2008-11-04 Date of Implementation: 2009-04-01 Older Standard (superseded by this standard): GB/T 10826-1989 Adopted Standard: ISO 7876-4-2004, IDT Regulation (derived from): National Standard Approval Announcement 2008 No.18 (Total No.131) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the diesel (compression ignition engines) spray vocabulary sleeve system pressure tubing and pipe end connector. These high-pressure tubing and pipe end fittings are widely used in global fuel injection systems, the need for accurate terminology. Note: When the term is used are listed in "fuel" of the word, as long as not to cause misunderstanding, can not be omitted. GB/T 10826.4-2008: Fuel injection equipment -- Vocabulary -- Part 3: Unit injectors---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.. Fuel injection equipment Vocabulary Part 3. Unit injectors ICS 27.020 J94 National Standards of People's Republic of China GB/T 10826.4-2008/ISO 7876-4.2004 Partially replace GB/T 10826-1989 Fuel injection means vocabulary Part 4. High pressure pipe fittings and pipe ends (ISO 7876-4.2004, IDT) Posted 2008-11-04 2009-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 10826 "fuel injection means vocabulary" is divided into five parts. --- Part 1. injection pump; --- Part 2. injector; --- Part 3. pump nozzle; --- Part 4. high-pressure tubing and pipe end fittings; --- Part 5. Common rail fuel injection device. This section is GB/T Part of 410,826. This part identical with ISO 7876-4.2004 "fuel injection means Vocabulary - Part 4. High pressure tubing and pipe end connections" (English Chinese Version). This section is equivalent translation ISO 7876-4.2004. For ease of use, this section made the following editorial changes. --- This part of ISO 7876-4.2004 and other international standards adopted, where the country has been adopted as a standard by our standards on behalf of the For relevant international standards; our country has not been adopted as a standard, still direct use of international standards; --- "This International Standard" be replaced by "this section"; --- Deleted international standards Preamble. This portion instead of GB/T 10826-1989 connector portion related to high-pressure pipeline and pipe end to "Diesel Fuel System terms" in Points, compared with the GB/T 10826-1989, the main changes are as follows. --- This section is amended as series of standards; --- On the part of the technical contents of the original high-pressure tubing and pipe end connection with significant amendments. GB/T 10826.1-2007, GB/T 10826.2-2008, GB/T 10826.3-2008 and GB/T 10826.4-2008 a Since instead of GB/T 10826-1989 of the entire contents. This part is proposed by China Machinery Industry Federation. This part of the National Standardization Technical Committee jet fuel centralized system. This section was drafted by. Shanghai Internal Combustion Engine Research Institute, Guangxi Yuchai Machinery Co., Ltd., Wuxi Fuel Injection Research Institute. The main drafters of this section. Bin count dimension, ranking Yusheng, Qu Junming, Bi Ye, Liu Yijun, Zhuxi Fen, Luo Zhijian, Songguo Chan, Xie Yaping, Chen Yunqing. This part of the standard replaces the previous editions are. --- GB/T 10826-1989. GB/T 10826.4-2008/ISO 7876-4.2004 Fuel injection means vocabulary Part 4. High pressure pipe fittings and pipe ends1 ScopeGB/T 10826 provisions of this part of the vocabulary diesel (compression-ignition engines) fuel injection system high pressure tubing and pipe end connector. These high-pressure tubing and pipe end connectors are widely used in the world's fuel injection system, the need for accurate terminology. NOTE. When the term is used in the list "fuel" the word, as long as not to cause misunderstanding, and can not be omitted.2 Normative referencesThe following documents contain provisions which, through reference GB/T 10826 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. JB/T 8120.1-2000 compression ignition engine with high-pressure tubing steel - Part 1. Single-walled cold drawn seamless steel pipe technical conditions (Idt ISO 8535-1.1996) JB/T 8120.2-2000 compression ignition engine with high-pressure tubing steel - Part 2. Composite Pipe technical conditions (idt ISO 8535-2.1993)3 Terms and Definitions3.1 In line with JB/T 8120.1 or JB/T 8120.2 provides that a certain cut length of the pipe. 3.2 At both ends of each pipe with a pipe connector nut (5.4), and each end of the tube are made with red cone stem (5.2) equipped with a molded end Head of high-pressure tubing (3.1). NOTE. Tubing can press (or not press) the intended use bent. And some additional components depending on the application. 3.3 Assembly clamp blocks (6.2) clamped together fixed to the engine, and two or more high-pressure tubing member (3.2). Note. The use of certain fuel pump, composed of multiple sets of high pressure tubing components. 3.4 Make high-pressure tubing member (3.2) with the fuel pump and injectors equipped with parts. Note. The definition of fuel pump and injectors, respectively, see GB/T 10826.1 and GB/T 10826.2.4 Tubing4.1 Single wall in line with JB/T 8120.1 predetermined cold-drawn seamless steel tubes. GB/T 10826.4-2008/ISO 7876-4.2004 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10826.4-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 10826.4-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 10826.4-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10826.4-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
