GB/T 10826.2-2008 English PDFUS$314.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 10826.2-2008: Fuel injection equipment -- Vocabulary -- Part 2: Fuel injectors Status: Valid
Basic dataStandard ID: GB/T 10826.2-2008 (GB/T10826.2-2008)Description (Translated English): Fuel injection equipment -- Vocabulary -- Part 2: Fuel injectors Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J94 Classification of International Standard: 27.020 Word Count Estimation: 16,198 Date of Issue: 2008-11-04 Date of Implementation: 2009-04-01 Older Standard (superseded by this standard): GB/T 10826-1989 Adopted Standard: ISO 7876-2-1991 Amd.1-1999, IDT Regulation (derived from): National Standard Approval Announcement 2008 No.18 (Total No.131) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the relevant compression-ignition engines (diesel) with the injector and its components vocabulary. Note: When the term is used are listed in " fuel " of the word, as long as not to cause misunderstanding can not be omitted. GB/T 10826.2-2008: Fuel injection equipment -- Vocabulary -- Part 2: Fuel injectors---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.. Fuel injection equipment Vocabulary Part 2. Fuel injectors ICS 27.020 J94 National Standards of People's Republic of China Partially replace GB/T 10826-1989 Fuel injection means vocabulary Part 2. Injector (ISO 7876-2.1991/Amd.1.1999, IDT) Posted 2008-11-04 2009-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 10826 "fuel injection means vocabulary" is divided into five parts. --- Part 1. injection pump; --- Part 2. injector; --- Part 3. pump nozzle; --- Part 4. high-pressure tubing and pipe end fittings; --- Part 5. Common rail fuel injection device. This section is GB/T Part of 210,826. This part identical with ISO 7876-2.1991/Amd. 1.1999 "fuel injection means Vocabulary - Part 2. Injector" (In English). This section is equivalent translation ISO 7876-2.1991/Amd. 1.1999. For ease of use, this section made the following editorial changes. --- "National award criteria" be replaced by "this section"; --- Deleted international standards foreword; --- This part of ISO 7876-2.1991 and other international standards adopted by our country who have been adopted as a standard by our standards on behalf of the For relevant international standards; our country has not been adopted as a standard, still direct use of international standards. This portion instead of GB/T 10826-1989 "Diesel Fuel System The term" in the section on the injector, and GB/T 10826-1989 compared to some of the major changes in the following. --- This section is amended as series of standards; --- The original injector part of the technical content has been considerably revised and classified arrangement. This part is proposed by China Machinery Industry Federation. This part of the National Standardization Technical Committee jet fuel centralized system. This section was drafted by. Shanghai Internal Combustion Engine Research Institute, Wuxi pump Youzui Institute, Guangxi Yuchai Machinery Co., Ltd., Wuxi Cape Power Co., Ltd. Cixi tricyclic diesel. The main drafters of this section. Du any party, ranking Yusheng, Liu Yijun, a male Chen, Qu Junming, Bi Ye, Songguo Chan, Tan Star concept, Chen Yunqing, Xie Yaping. This part of the standard replaces the previous editions are. --- GB/T 10826-1989. Fuel injection means vocabulary Part 2. Injector1 ScopeGB/T 10826 provisions of this section concerning compression ignition engines (diesel) with the injector and its parts vocabulary. NOTE. When the term is used in the list "fuel" the word, as long as not to cause misunderstanding can not be omitted.2 Terms and definitions2.1 By the nozzle (2.2) and the injector body (2.3) consisting of assembly, through which a certain amount of fuel injected into the combustion chamber under high pressure. The special structure of the injector nozzle and injector can be integrally bodies (see ISO 2698 regulations). 2.2 It consists of two main parts, namely, the needle valve body (nozzlebody) and needle (valveneedle) consisting of a valve. When the valve opening by which the Fuel atomization. 2.3 For mounting the nozzle (2.2) that it is positioned in the cylinder head assembly. It includes in addition to all the injector nozzle parts.3 works3.1 Under high pressure to make liquid fuel conversion speed spray tiny droplets composed by.4 working methods4.1 Only by the pressure-driven metering fuel injector (2.1). 4.2 Driven by an external mechanical injector device (2.1). 4.3 By a suitable electric drive unit injector (2.1). 4.4 The method relies on the hydraulic pressure of the fuel to drive the outside of the injector (2.1). Note. The above four injectors may be made of a combination of the working methods of the drive (for example, hydro-mechanical, etc.). ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10826.2-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 10826.2-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 10826.2-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10826.2-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
