GB/T 10826.3-2008 English PDF

US$154.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 10826.3-2008: Fuel injection equipment -- Vocabulary -- Part 3: Unit injectors
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 10826.3-2008	154	Add to Cart	3 days	Fuel injection equipment -- Vocabulary -- Part 3: Unit injectors	Valid

Similar standards

GB/T 8243.7   GB/T 8243.6   JB/T 10505   GB/T 25367   GB/T 10826.5   GB/T 10826.2   

Basic data

Standard ID: GB/T 10826.3-2008 (GB/T10826.3-2008)
Description (Translated English): Fuel injection equipment -- Vocabulary -- Part 3: Unit injectors
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J94
Classification of International Standard: 27.020
Word Count Estimation: 8,832
Date of Issue: 2008-11-04
Date of Implementation: 2009-04-01
Older Standard (superseded by this standard): GB/T 10826-1989
Adopted Standard: ISO 7876-3-1993, IDT
Regulation (derived from): National Standard Approval Announcement 2008 No.18 (Total No.131)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the relevant compression-ignition engines (diesel) with a pump nozzle and parts of words and definitions. To supplement GB/T 1883 deficiencies. The definitions in section 10826 GB/T only applies to pump nozzles, general definition of other relevant aspects of the injector. Visible GB/T 10826. 2.

GB/T 10826.3-2008: Fuel injection equipment -- Vocabulary -- Part 3: Unit injectors

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
. Fuel injection equipment Vocabulary Part 3. Unit injectors ICS 27.020 J94 National Standards of People's Republic of China GB/T 10826.3-2008/ISO 7876-3.1993 Partially replace GB/T 10826-1989 Fuel injection means vocabulary Part 3. pump nozzle (ISO 7876-3.1993, IDT) Posted 2008-11-04 2009-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 10826 "fuel injection means vocabulary" is divided into five parts. --- Part 1. injection pump; --- Part 2. injector; --- Part 3. pump nozzle; --- Part 4. high-pressure tubing and pipe end fittings; --- Part 5. Common rail fuel injection device. This section is GB/T Part of 310,826. This part identical with ISO 7876-3.1991/Amd. 1.1993 "fuel injection means Vocabulary - Part 3. pump nozzle" (English Version). This section is equivalent translation ISO 7876-3.1991/Amd. 1.1993. For ease of use, this section made the following editorial changes. --- "National award criteria" be replaced by "this section"; --- Deleted international standards foreword; --- This part of ISO 7876-3.1993 and other international standards adopted, where the country has been adopted as a standard by our standards on behalf of the For relevant international standards; our country has not been adopted as a standard, still direct use of international standards. This portion instead of GB/T 10826-1989 for pump nozzle part of the "Diesel Fuel System terms" in the GB/T 10826- Compared to 1989, the main changes are as follows. --- This section is amended as series of standards; --- The original pump nozzle part of a larger technology content modifications. This part is proposed by China Machinery Industry Federation. This part of the National Standardization Technical Committee jet fuel centralized system. This section was drafted by. Shanghai Internal Combustion Engine Research Institute, Wuxi pump Youzui Institute, Guangxi Yuchai Machinery Company Limited. The main drafters of this section. Bi Ye, meter-dimensional Bin, ranking Yusheng, Qujun Ming, Liang Feng, Song Guochan, Xie Yaping, Chen Yunqing, Huang Ming-liter, Hua . This part of the standard replaces the previous editions are. --- GB/T 10826-1989. GB/T 10826.3-2008/ISO 7876-3.1993 Fuel injection means vocabulary Part 3. pump nozzle

1 Scope

GB/T 10826 provisions of this section concerning compression ignition engines (diesel) pump nozzle and parts vocabulary and definitions to Supplementary GB/T 1883 [1] deficiencies. This section GB/T 10826 in the definition applies only to the pump nozzle; a general definition of other relevant aspects of the injector, visible GB/T 10826.2.

2 Normative references

The following documents contain provisions which, through reference GB/T 10826 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 10826.1-2007 fuel injection means Vocabulary - Part 1. Fuel Pump (ISO 7876-1.1990, IDT) GB/T 10826.2-2008 fuel injection means Vocabulary - Part 2. injectors (ISO 7876-2.1991/Amd. 1.1999, IDT)

3 Terms and Definitions

3.1 The single-cylinder pump and injector performance in one set, and it will be quantified by the fuel under high pressure into the combustion chamber assembly. Note. pump nozzle (3.1) according to the following three main features Category. a) Drive mode (energy input); b) timing control; c) measurement control. Pump nozzle with these characteristics may be mechanical, hydraulic electric or electronic. To fully describe a pump nozzle (3.1), the need for all of the above features Specifically described. Example. With electronic timing and metering control mechanically driven pump nozzle.

4 parts

4.1 The external drive member motion into a linear motion of the plunger member. 4.2 In contact with the external drive member, with tappet member (4.1) separate sections. 4.3 Tappet member (4.1) located tappet head (4.2) between the plunger part. GB/T 10826.3-2008/ISO 7876-3.1993 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 10826.3-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 10826.3-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 10826.3-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 10826.3-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.