GB/T 10599-2023 English PDFUS$289.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 10599-2023: Multi-rope friction hoist Status: Valid GB/T 10599: Historical versions
Basic dataStandard ID: GB/T 10599-2023 (GB/T10599-2023)Description (Translated English): Multi-rope friction hoist Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: D93 Classification of International Standard: 73.100.40 Word Count Estimation: 14,154 Date of Issue: 2023-12-28 Date of Implementation: 2024-07-01 Older Standard (superseded by this standard): GB/T 10599-2010 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 10599-2023: Multi-rope friction hoist---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 73:100:40 CCSD93 National Standards of People's Republic of China Replace GB/T 10599-2010 Multi-rope friction hoist Published on 2023-12-28 2024-07-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee Table of contentsPrefaceⅠ 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Type and basic parameters 2 5 Technical requirements 5 5:1 General requirements 5 5:2 Parts requirements 5 5:2:1 Spindle device 5 5:2:2 Disc brake 6 5:2:3 Reducer 6 5:2:4 Hydraulic station 6 5:2:5 Depth indicator system 7 5:2:6 Guide wheel and sheave device 7 5:2:7 Electronic control system 7 5:3 Security Protection 7 5:4 Direct-coupled electric motor hoist 8 5:5 Product complete supply scope 8 6 Test methods 8 7 Inspection Rules 9 7:1 Inspection classification 9 7:2 Factory inspection 10 7:3 Type inspection 10 8 Marking, packaging, transportation, storage and maintenance 10ForewordThis document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting: This document replaces GB/T 10599-2010 "Multi-rope friction hoist": Compared with GB/T 10599-2010, except for structural adjustment and In addition to editorial changes, the main technical changes are as follows: a) Changed the product model compilation method (see 4:2, 3:2 of the:2010 edition); b) The main technical parameters of the product have been changed (see 4:3, 3:3 of the:2010 version); c) Changed the technical requirements for some parts and components (see Chapter 5, Chapter 4 of the:2010 edition); d) The product test method has been changed (see Chapter 6, Chapter 5 of the:2010 edition); e) Product inspection rules have been changed (see Chapter 7, Chapter 6 of the:2010 edition); f) The requirements for product marking, packaging, transportation, storage and maintenance have been changed (see Chapter 8, Chapter 7 of the:2010 edition): Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents: This document is proposed by China Machinery Industry Federation: This document is under the jurisdiction of the National Mining Machinery Standardization Technical Committee (SAC/TC88): This document was drafted by: Luoyang Mining Machinery Engineering Design and Research Institute Co:, Ltd:, CITIC Heavy Machinery Co:, Ltd:, Shanxi Xinfusheng Machinery Manufacturing Co:, Ltd:, Shaanxi Mining Equipment Inspection and Inspection Co:, Ltd:, Jinzhou Mining Machinery (Group) Co:, Ltd:, Shandong Taishan Tiandun Mining Machinery Co:, Ltd:, Luoyang Baikete Technology Development Co:, Ltd:, Luoyang Weka Mining Machinery Equipment Co:, Ltd:, He Bi Wanfeng Mining Machinery Manufacturing Co:, Ltd:, Yanchang Petroleum Balasu Coal Co:, Ltd: The main drafters of this document: Qu Tie, Xu Yongfu, Du Bo, Zhang Lanjun, Nie Yong, Wang Shuang, Hu Xiuhai, Zhang Jiayi, Liu Kai, Niu Guoqiang, Hu Xilei, Sui Shun, Liang Guanying, Kou Lei, Gao Zhikang, Liu Tongxin, Li Yuhui, Guo Kongfei: This document was first published in 1989, revised for the first time in:1998, revised for the second time in:2010, and this is the third revision: Multi-rope friction hoist1 ScopeThis document specifies the type, basic parameters, technical requirements, test methods, inspection rules, marking, packaging, and transportation of multi-rope friction hoists: transportation, storage and maintenance: This document is suitable for installation in vertical shafts of coal mines, metal mines, and non-metal mines, for lifting people and objects in environments without explosive gases and dust: Multi-rope friction hoist for materials and equipment:2 Normative reference documentsThe contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document: GB/T 191 Packaging, storage and transportation pictorial mark GB/T 4879 Anti-rust packaging GB/T 8923:1-2011 Visual assessment of surface cleanliness of steel surface preparation before application of coatings Part 1: Uncoated The corrosion grade and treatment grade of the steel surface and the steel surface after the original coating has been completely removed GB/T 13306 Signage GB/T 13325 Basic criteria for measuring noise radiated by machines and equipment at the operator's position (engineering level) GB/T 11345-2023 Ultrasonic testing technology, testing levels and assessment for non-destructive testing of welds GB/T 13384 General technical conditions for mechanical and electrical product packaging GB 16423 Safety regulations for metal and non-metal mines GB :20181 Safety requirements for mine hoists and mining hoisting winches GB/T 25706 Mining machinery product model compilation method GB/T 29712-2023 Non-destructive testing of welds and ultrasonic testing acceptance levels GB/T 37400:1-2019 General technical conditions for heavy machinery Part 1: Product inspection GB/T 37400:12 General technical conditions for heavy machinery Part 12: Coating JB/T 1581 Ultrasonic testing method for steam turbine, turbine generator rotor and main shaft forgings JB/T 3277 Mine hoist and mining hoist winch hydraulic station JB/T 3721 Disc brake brake shoe for mine hoist and mine hoisting winch JB/T 3812 Disc springs for disc brakes of mine hoists and mining winches JB/T 6754:2 DC drive mine hoist electrical control equipment Part 2 Thyristor electrical control equipment JB/T 8519 Mine hoist and mining hoisting winch disc brake JB/T 9043 Planetary gear reducer for mine hoist JB/T 10347 Friction lining of friction hoist JB/T 12808 Heavy-duty planetary gear reducer for mining JB/T 13193 Technical conditions for low-voltage variable frequency drive electronic control equipment for mine hoists and mine hoisting winches ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10599-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 10599-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 10599-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10599-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 10599-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10599-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
