GB/T 10447-2008 English PDF

US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 10447-2008: Plain bearings -- Pressed bimetallic half thrust washers -- Features and tolerances
Status: Valid

GB/T 10447: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 10447-2008	209	Add to Cart	3 days	Plain bearings -- Pressed bimetallic half thrust washers -- Features and tolerances	Valid
GB/T 10447-1989	239	Add to Cart	2 days	Plain bearings--Pressed bimetallic half thrust washers--Features and tolerances	Obsolete

Similar standards

GB/T 18329.1   GB/T 2889.6   GB/T 35087   GB/T 14910   GB/T 10446   

Basic data

Standard ID: GB/T 10447-2008 (GB/T10447-2008)
Description (Translated English): Plain bearings -- Pressed bimetallic half thrust washers -- Features and tolerances
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J12
Classification of International Standard: 21.100.10
Word Count Estimation: 9,921
Date of Issue: 2008-08-25
Date of Implementation: 2009-03-01
Older Standard (superseded by this standard): GB/T 10447-1989
Quoted Standard: GB/T 2889.1
Adopted Standard: ISO 6526-1983, MOD
Regulation (derived from): National Standard Approval Announcement 2008 No.14 (Total No.127)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the half thrust washers sliding bearing elements and tolerances. This standard applies to metal forming, 160mm outside diameter less than or equal bimetallic half thrust washers, this standard does not include the size of half thrust washers series.

GB/T 10447-2008: Plain bearings -- Pressed bimetallic half thrust washers -- Features and tolerances

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plain bearings. Pressed bimetallic half thrust washers. Features and tolerances ICS 21.100.10 J12 National Standards of People's Republic of China Replacing GB/T 10447-1989 Bearing half thrust washers Features and tolerances (ISO 6526. 1983, MOD) Posted 2008-08-25 2009-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This revised standard adopts ISO 6526. 1983 "plain bearings with stamping bimetallic half thrust washers - Features and tolerances", and ISO 6526. 1983 compared to the main differences are as follows. --- Standard different names; --- Increasing the normative references; --- Order the different chapters. This standard is GB/T 10447-1989 "bearing half thrust washers - Features and tolerances" amendments and GB/T 10447- The main changes compared to 1989 are as follows. --- Increasing the normative references; --- Modify some code name; --- Adjust the standard sequence of chapters; --- Adjust the half thrust washers within a predetermined difference in outside diameter (1989 version 3.2.2, 4.2.2 in this edition). From the date of implementation of this standard instead of GB/T 10447-1989. The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee of the sliding bearings. This standard is drafted by. Productivity Promotion Center in the machine. Participated in the drafting of this standard. Shanghai Jiaotong University School of Mechanical and Power Engineering, Zhejiang Lin'an Oriental Bearing Co., Ltd. This standard by the National Standardization Technical Committee Secretariat slide bearing responsible for the interpretation. This standard replaces the standards previously issued as follows. --- GB/T 10447-1989. Bearing half thrust washers Features and tolerances

1 Scope

This standard specifies the slide bearing half thrust washers - Features and tolerances. This standard applies to stamped and formed an outer diameter of 160mm or less bimetallic semicircular thrust washers, this standard does not include half thrust Dimensions of gaskets series.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 2889.1 bearing terms, definitions and classification - Part 1. Design, bearing materials and their properties (GB/T 2889.1- 2008, ISO 4378-1.1997, IDT) 3 Terms, code and structure type 3.1 Terms and Code Terms and definitions GB/T 2889.1 stipulated apply to this standard. Terms and thrust washer code shown in Table 1. Table 1 Terminology and symbols No. Code Name An outer diameter of 1 D stop thrust washers

3 HD thrust washer height

5 ED targeting top flange height

6 FD positioning flange height roots

7 A positioning flange width

8 α sump chamfer

9 GW oil groove bottom width

10 GE oil groove bottom wall thickness 11 GX sump distance from the center axis 15 LJ width at the abutment surfaces 18 β butt face of the slide surface angle skiving ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 10447-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 10447-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 10447-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 10447-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 10447-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10447-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.