GB/T 10405-2009 English PDFUS$299.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 10405-2009: Type designation for electrical machine automatic control system Status: Valid GB/T 10405: Historical versions
Basic dataStandard ID: GB/T 10405-2009 (GB/T10405-2009)Description (Translated English): Type designation for electrical machine automatic control system Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K24 Classification of International Standard: 29.160.30 Word Count Estimation: 13,152 Date of Issue: 2009-09-30 Date of Implementation: 2010-02-01 Older Standard (superseded by this standard): GB/T 10405-2001 Regulation (derived from): Announcement of Newly Approved National Standards No. 10 of 2009 (No. 150 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the control of the motor for a given model should follow the principles. This standard applies to control the motor and combinations thereof model name. GB/T 10405-2009: Type designation for electrical machine automatic control system---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Type designation for electrical machine automatic control system ICS 29.160.30 K24 National Standards of People's Republic of China Replacing GB/T 10405-2001 Motor control Type designation Posted 2009-09-30 2010-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard replaces GB/T 10405-2001 "Motor control type designation." This standard compared with GB/T 10405-2001 main changes are as follows. --- According to the product structure for controlling the motor industry are organized original standard has been adjusted. --- Increasing the motor-products. --- Removed some out of product. --- According to GB/T 1.1-2000. provisions "Standardization Guide Part 1 standard structure and write rules" of the standard The formatting has been modified. The standard proposed by China Electrical Equipment Industrial Association. This standard by the National Standardization Technical Committee micromotor (SAC/TC2) centralized. This standard was drafted. Xi'an Institute of micro-motor, Hengdian Group to the Motor Co., Ltd., Ningbo vigorously de Transmission Equipment Co. Secretary, Secretary Zhuang Shanghai Electric Co., Ltd., CLP 21. The main drafters of this standard. Tan Ying, He Dongde, Cen Guo-jian, Kim Dong Shao, Huang Haiying. This standard replaces the standards previously issued as follows. --- GB/T 10405-1989; --- GB/T 10405-2001. Motor control Type designation1 ScopeThis standard specifies the principles should be given control of the motor model to follow. This standard model is suitable for controlling the motor, and combinations thereof are named.2 Model Name2.1 General Control of the motor model usually consists of the following four components. Frame Product Code performance parameter code derived code 2.2 Frame 2.2.1 Single Frame Product Frame size motor shall meet the following requirements. a) Frame outer diameter or with shaft heights indicated value only take part, no units of measurement. Table 1. b) with shaft heights indicates frame size, it should be represented in shaft heights Frame after adding "M-". Table 1 Frame sizes 12 16 20 24 2,832,364,045,505,560 Outer diameter/mm 12.5 16 20 24 28 32 36 40 45 50 55 60 Frame size 70 8,090,100,110,130,160,200 250 320 Outer diameter/mm 70 80 90 100 110 130 160 200 250 320 Frame 2.2.2 Unit Frame unit to which the frame represents the largest motor size. 2.3 Product Name Code Product name code consists of two to four Chinese phonetic letters (see Chapter 3). Each letter has a certain meaning of Chinese characters, the first a word Mother indicates the motor category, behind the letters of these motors fine classification. Product Name Code by the unit consisting of single or motor-category code, code name in stand-alone products or categories of motor Plus between dashes. Used code letters, usually a product name first characters of a Chinese phonetic alphabet, the letter caused if the selected model or repeat He can not use reason, then in turn choose letters or other characters behind the phonetic alphabet. 2.4 Performance parameters Code 2.4.1 General Performance parameters Code by two or more Arabic numerals, order, or a visual representation of the performance parameters of the motor. Performance parameters Code should Comply with this standard or product-specific technical conditions. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10405-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 10405-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 10405-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10405-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 10405-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10405-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
