GB/T 10066.5-2014 English PDFUS$474.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 10066.5-2014: Test methods for electroheat installations -- Part 5: Plasma equipment for electroheat and electrochemical applications Status: Valid
Basic dataStandard ID: GB/T 10066.5-2014 (GB/T10066.5-2014)Description (Translated English): Test methods for electroheat installations -- Part 5: Plasma equipment for electroheat and electrochemical applications Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K61 Classification of International Standard: 25.180.10 Word Count Estimation: 24,270 Date of Issue: 9/3/2014 Date of Implementation: 2/1/2015 Older Standard (superseded by this standard): GB/T 13535-1992 Quoted Standard: GB/T 2900.23-2008; IEC 60398-1999 Adopted Standard: IEC/TS 60680-2008, IDT Regulation (derived from): People's Republic of China Announcement of Newly Approved National Standards No. 21 of 2014 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard applies to: a) thermal plasma torch systems: arc plasma system; induction plasma system. b) the use of thermal plasma torch system means: spraying equipment; solid, liquid and gaseous charge heating and chemical treatment equipment. Test Met GB/T 10066.5-2014: Test methods for electroheat installations -- Part 5: Plasma equipment for electroheat and electrochemical applications---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Test methods for electroheat installations Part 5. Plasma equipment for electroheat and electrochemical applications ICS 25.180.10 K61 National Standards of People's Republic of China Replacing GB/T 13535-1992 Test methods for electroheat installations - Part 5. Electric and Electrochemical plasma equipment Testmethodsforelectroheatinstalations-Part 5. Plasmaequipmentfor (IEC /T S60680.2008, Testmethodsofplasmaequipmentfor electroheatandelectrochemicalapplications, IDT) Issued on. 2014-09-03 2015-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 pilot projects and general test conditions 5 4.1 is suitable for the thermal plasma torch systems test and measurement lists 5 4.1.1 arc plasma system 5 4.1.2 Induction plasma system 6 4.2 for measuring and pilot projects means having a plasma torch 6 4.2.1 spray device 6 4.2.2 solid, liquid and gaseous charge heating and electrochemical device 7 4.3 General test conditions 8 5 Test and measurement methods 8 5.1 is suitable for plasma system test 8 5.1.1 The plasma arc torch system 8 5.1.2 induction plasma torch 10 5.2 apply to the use of a plasma torch apparatus tests 12 5.2.1 spray device or apparatus 12 5.2.2 solid, liquid and gaseous charge heating and electrochemical device 13 6 with reference to FIG. 14 Appendix A (normative) DC arc plasma torch and plasma torch system standard definition of energy efficiency 15 Annex B (informative) in the electromagnetic field staff 17 Annex C (normative) induction plasma torch and torch system energy efficiency standards defined 18 References 19ForewordGB/T 10066 "Standard Test Method for electric apparatus" has 13 sections. --- Part 1. General section (GB/T 10066.1-2004, IEC 60398.1999, MOD); --- Part 2. Induction Channel Furnace (GB/T 10066.2-2004, IEC 60396.1991, MOD); --- Part 3. coreless induction furnace (GB/T 10066.3-2004, IEC 60646.1992, MOD); --- Part 31. high frequency induction heating apparatus of the generator output power measurement (GB/T 10066.31-2007, IEC 61922. 2002, IDT); --- Part 4. Indirect resistance furnaces (GB/T 10066.4-2004, IEC 60397.1994, NEQ); --- Part 6. Determination of industrial microwave heating apparatus of power output (GB/T 10066.6-2008, IEC 61307.2006, IDT); --- Part 7. Electric apparatus having an electron gun (GB/T 10066.7-2009, IEC 60703.2008, IDT); --- Part 8. ESR furnaces (GB/T 10066.8-2006, IEC 60779.2005, IDT); --- Part 9. High-frequency dielectric heating apparatus determination of power output (GB/T 10066.9-2008, IEC 61308.2005, IDT); --- Part 10. Direct electric arc furnace (GB/T 10066.10-2005, IEC 60676.2002, MOD); --- Part 11. submerged arc furnace (GB/T 10066.11-2005, IEC 60683. 1980, MOD); --- Part 12. infrared heating means (GB/T 10066.12-2006). In addition to the Part 12 standards are set using the corresponding IEC standards. This section GB/T Part 510 066 should be the first part and with the use of GB 5959.5. This section drafted in accordance with GB/T 1.1-2009 given rules. This section instead of "Standard Test Method for plasma electric equipment" GB/T 13535-1992, compared with the latter mainly technical changes are as follows. --- Full text of the "standard" to "this part", according to GB/T 1.1-2009 orchestrated; --- The "plasma gun" with "plasma torch"; --- Scope covers the induction plasma torch, no longer suitable for welding, cutting and welding equipment; --- Deleted the size, mobility, noise and radio interference measurement reference documents; --- Delete no longer applicable definition plasma welding, cutting, etc., delete "pilot arc power," "overlay power" is defined, add "plasma Daughter "" hot plasma "" plasma heating, "" plasma torch "and several other terms and definitions, modify other terms definition; --- Standard structure changes. The body composition of the plasma torch, power, and cooling the working gas components and equipment for the control unit As a whole into a plasma torch system, and then were based on ignition and the presence of the chamber/reactor plasma torch system Equipment and systems are classified, respectively, the provisions to which they apply test and measurement, and GB/T 13535-1992 The torch Test and measurement system components and devices on the same level; --- No longer test power plant characteristics of the entire device, leaving only the measured potential and other connections; --- Delete "pilot circuit characteristic" test (see 1992 edition 5.2); --- Increase in sound level measurement, as well as toxic products, explosion hazard identification requirements; --- Remove the powder feeding and wire feeding rate unevenness measurement (see the 1992 version 5.5.1f, 5.5.2c); --- Remove plasma torch discharge measuring concentrations of toxic compounds (see 1992 Version 5.6.7); --- Increasing adjustment mode test; --- Increase the ripple factor, coolant resistivity, average enthalpy, measured thermal radiation; --- Spraying apparatus for measuring the increase in material properties of the liquid; --- Delete the overlay arc operating characteristics (see 1992 edition 5.7); --- Increase the "Reference drawings" (see Chapter 6); --- Add "normative Annex A"; --- Add "informative Appendix B"; --- Add "Normative Annex C"; --- Increase the "References." This section uses the translation method is equivalent to using IEC /T S60680.2008 "Test methods for electroheat and electrochemical devices using plasma" (1st edition). Consistency correspondence between this part of international documents and normative references of our files are as follows. --- GB/T 10066.1-2004 Test methods for electric equipment - Part 1. General section (IEC 60398.1999, MOD) For ease of use, the IEC /T S60680.2008, this section made the following editorial changes. --- Standard name by the name is changed to "electric and electrochemical test methods for equipment used in the plasma." This part is proposed by the China Electrical Equipment Industrial Association. This part of the National Electric Equipment Industry Standardization Technical Committee (SAC/TC121) centralized. This section is drafted. Xi'an Institute Ltd. furnace, furnace Metallurgical Engineering Technology Center, the State Quality Supervision and Inspection Center Furnace, Shaanxi Province electric engineering and technology research center. The main drafters of this section. Huangkui Gang, Ge Hua, Zhu Lin. This part of the standard replaces the previous editions are. --- GB/T 13535-1992. Test methods for electroheat installations - Part 5. Electric and Electrochemical plasma equipment1 ScopeTest methods specified in this standard GB/T 10066 apply to. a) thermal plasma torch systems. --- Arc plasma system; --- Induction plasma system. b) using a thermal plasma torch system means. --- Spraying equipment; --- Solid, liquid and gaseous charge heating and chemical treatment equipment. Standard Test Method for plasma torch for welding, cutting and allied processes specified in GB/T 15579.7-2005 in. The purpose of this section is to make the determination of thermal plasma torch systems and use of one or more devices (or equipment) plasma torch system is mainly Test methods and conditions of standardization parameters and technical characteristics. All tests specified in this part apply to every incomplete type of equipment it covers. Therefore, it is necessary for a particular plasma Daughter torch system or device to which it applies selection trials. This choice is valid in this section. Security systems and devices or equipment a) and b) the requirements see GB 5959.5.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2900.23-2008 Electrotechnical terminology industrial electric equipment (IEC 60050-841.2004, IDT) IEC 60398.1999 Common test methods for electrical industrial apparatus (Industrialelectroheatinginstalations-General testmethods)3 Terms and DefinitionsGB/T 2900.23-2008 defined and the following terms and definitions apply to this document. 3.1 Plasma plasma By the free electrons, ions and neutral particles (atoms and/or molecules and/or groups of atoms) composed of electrically neutral and macroscopic conducting any Ionized gas. NOTE. rewrite GB/T 2900.23-2008,841-31-01. 3.2 Thermal plasma thermalplasma At approximately atmospheric pressure or above atmospheric pressure, the plasma in local thermodynamic equilibrium. NOTE. In the IEC standard, the device or devices involved, with a simplified "plasma" instead of "thermal plasma" is permitted. [GB/T 2900.23-2008,841-31-07] ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10066.5-2014_English be delivered?Answer: Upon your order, we will start to translate GB/T 10066.5-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 10066.5-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10066.5-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
