GB/T 37752.1-2019 PDF EnglishUS$750.00 · In stock · Download in 9 seconds
GB/T 37752.1-2019: Industrial furnaces and associated processing equipment -- Safety -- Part 1: General requirements Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 37752.1-2019: Industrial furnaces and associated processing equipment -- Safety -- Part 1: General requirements---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT37752.1-2019 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 25.180.10 K 61 GB/T 37752.1-2019 / ISO 13577-1.2016 Industrial furnaces and associated processing equipment - Safety - Part 1.General requirements (ISO 13577-1.2016, IDT) Issued on. JUNE 04, 2019 Implemented on. JANUARY 01, 2020 Issued by. State Administration for Market Regulation; Standardization Administration of the People’s Republic of China. Table of ContentsForeword... 4 1 Scope... 5 2 Normative references... 5 3 Terms and definitions... 6 4 Safety requirements and/or protective measures... 7 4.1 General... 7 4.2 Mechanical safety... 9 4.3 Electrical safety... 12 4.4 Thermal and cryogenic safety... 13 4.5 Noise... 16 4.6 Vibration... 17 4.7 Radiation safety... 17 4.8 Materials and substances processed, used or exhausted... 19 4.9 Ergonomics... 20 4.10 Hazard combination... 20 4.11 Malfunction... 20 4.12 Missing and incorrectly fitted safety devices... 21 5 Verification... 21 6 Information for use... 24 6.1 General requirements... 24 6.2 Location and nature of the information for use... 25 6.3 Signals and warning devices... 25 6.4 Instruction handbooks/manuals... 27 Annex A (Informative) List of significant hazards... 29 Annex B (Informative) List of common industrial furnaces and associated processing equipment... 40 Annex C (Informative) Typical test report... 44 Annex D (Informative) Work-permit authorization... 46 Annex E (Informative) Information specific to Japan... 47 Annex F (Informative) Requirements specific to the USA... 48 Annex G (Informative) Requirements specific to the EU and associated countries... 51 Annex H (Informative) Requirements specific to Canada... 53 Annex I (Informative) Requirements specific to China... 54 Annex NA (Informative) List of Chinese documents that have consistent correspondence with the international documents normatively referenced in this Part ... 55 Bibliography... 56ForewordGB/T 37752, Industrial furnaces and associated processing equipment - Safety, is divided as follows. — Part 1.General requirements. This Part is Part 1 of GB/T 37752. This Part is drafted in accordance with the rules given in GB/T 1.1-2009. This Part is identical to ISO 13577-1.2016 Industrial furnaces and associated processing equipment - Safety - Part 1.General requirements by using the translation method. See Annex NA for Chinese documents that have consistent correspondence with the international documents normatively referenced in this Part. This Part makes the following editorial changes. — Change the unit “gal” in 4.1.2 to “cm/s2”; — Change the unit “bar” to “Pa”; — Add the informative annex NA. This Part was proposed by China Electrical Equipment Industry Association. This Part shall be under the jurisdiction of the National Technical Committee on Industrial Electro-heat Equipment of Standardization Administration of China (SAC/TC 121). Drafting organizations of this Part. Xi’an Electric Furnace Institute Co., Ltd., Chongqing CISDI Thermal & Environmental Engineering Co., Ltd., Shaanxi Hongxinyuan Metallurgical Equipment Industry Co., Ltd., Henan Tianli Thermal Equipment Co., Ltd., Zhuzhou Electric Cooker Factory, National Center for Quality Supervision and Test of Electric Furnace, Xi’an Flit Heat Treatment Co., Ltd. Main drafters of this Part. Ge Huashan, Li Kun, Yu Weijiang, Cheng Shuming, Li Mingke, Yang Zhen, Yan Xianbin, Zhang Yongwu, Yuan Fanglan, Yang Jia. Industrial furnaces and associated processing equipment - Safety - Part 1.General requirements1 ScopeThis Part of GB/T 37752 specifies the general safety requirements common to industrial furnaces and associated processing equipment (TPE).2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 12100.2010, Safety of machinery - General principles for design - Risk assessment and risk reduction3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 12100 and ISO 13574 apply.4 Safety requirements and/or protective measuresThe manufacturer shall maintain evidence that all safety requirements of the design have been fulfilled.5 VerificationProof of compliance of the safety requirements and/or protective measures shall be demonstrated by any one, or a combination, of the following.6 Information for useWith this in view, it shall inform and warn the operator; the supervisor shall be notified and warned of residual risks. Requirements concerning where signals and warning devices shall be fitted are given in Clause 4.Annex A(Informative) List of significant hazards This annex lists all significant hazards, hazardous situations and events, as far as they are dealt with in this document, that are identified by risk assessment as significant for this type of equipment and that require action to eliminate or reduce the risk. The following significant hazards can occur in the use of TPE. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 37752.1-2019 be delivered?Answer: The full copy PDF of English version of GB/T 37752.1-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 37752.1-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 37752.1-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 37752.1-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 37752.1-2019?A step-by-step guide to download PDF of GB/T 37752.1-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 37752.1-2019". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
