GB/T 10066.1-2019 English PDFUS$759.00 · In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 10066.1-2019: Test methods for electroheating and electromagnetic processing installations -- Part 1: General Status: Valid GB/T 10066.1: Historical versions
Basic dataStandard ID: GB/T 10066.1-2019 (GB/T10066.1-2019)Description (Translated English): Test methods for electroheating and electromagnetic processing installations -- Part 1: General Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K61 Classification of International Standard: 25.180.10 Word Count Estimation: 38,361 Date of Issue: 2019-08-30 Date of Implementation: 2020-03-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 10066.1-2019: Test methods for electroheating and electromagnetic processing installations -- Part 1: General---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Test methods for electroheating and electromagnetic processing installations - Part 1. General ICS 25.180.10 K61 National Standards of People's Republic of China Replace GB/T 10066.1-2004 Test method for electrothermal and electromagnetic treatment devices Part 1. General part Part 1.General (IEC 60398.2015, Instalations for electroheating and electromagnetic processing-Generalperformancetestmethods, MOD) Published on.2019-08-30 2020-03-01 implementation State market supervision and administration China National Standardization Administration issued ContentForeword III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 3.1 General term 1 3.2 Energy Efficiency 2 3.3 Status and Parts 2 3.4 Workload 3 4 Basic requirements for test and test conditions 3 4.1 Objective 3 of the test 4.2 Communication and use of test results 4 4.3 Test boundary of the energy system 4 4.4 General requirements for testing 5 4.5 Operating conditions during the test 5 4.6 Environmental conditions during the test 6 4.7 Power supply voltage 6 4.8 Measuring instrument 6 5 Comparison of equipment or devices 6 6 Basic measurements and workloads 7 6.1 Overview 7 6.2 Time resolution 7 6.3 Frequency measurement 7 6.4 Measurement of electrical parameters 7 6.5 Measurement of temperature 8 6.6 Measurement of ambient temperature 8 6.7 Measurement of pressure, humidity or fluid composition 9 6.8 Measurement of vacuum 10 6.9 Workload 10 7 Numerical model 11 8 Test item 11 8.1 General requirements 11 8.2 Cold Test Project 11 8.3 Thermal Test Project 12 9 Test method 13 9.1 Overview 13 9.2 Visual inspection 13 9.3 Measurement of insulation resistance 13 9.4 Insulation withstand voltage test 13 9.5 Control circuit test 14 9.6 Cooling system test 14 9.7 Pneumatic system test 14 9.8 Hydraulic System Test 15 9.9 Cold test of the movement or action of the moving mechanism 15 9.10 Tests for safety interlocks and alarm systems 15 9.11 Vacuum Test 15 9.12 Measurement of surface temperature of heated components 16 9.13 Measurement of coolant flow 16 9.14 Measurement of coolant temperature rise 16 9.15 Thermal test of the movement or action of a moving mechanism 16 9.16 Measurement of working vacuum 16 9.17 Measurement of power consumption and power at different operating stages 16 9.18 Cumulative power consumption and peak power measurement 17 9.19 Determination of equipment capacity (net productivity) 18 9.20 Measurement of the effect of supply voltage on performance 18 9.21 Determination of the range of processing expected to operate 18 9.22 Determination of surface properties of treated workloads 19 9.23 Determination of energy efficiency of the device 20 9.24 Sound Level Measurement 22 9.25 Visual inspection after hot test 22 Appendix A (informative) Energy Efficiency Assessment 23 A.1 Use this section for energy efficiency assessment 23 A.2 Planning-Implementation-Inspection-Improvement (PDCA) Cycle Method 23 A.3 Comparison, classification and marking 23 A.4 Comparison with ISO 13579-1 24 Appendix B (informative) Visual representation of energy efficiency issues 25 B.1 Overview 25 B.2 Energy balance of the Sangji Figure 25 B.3 Time-resolved power usage Figure 25 Appendix C (informative appendix) can return efficiency 27 Appendix D (informative) Energy Assessment 28 D.1 Overview 28 D.2 Minimum energy consumption 28 D.3 insulation power 29 D.4 Transmission loss and transmission efficiency 29 D.5 Example 30 Reference 31ForewordGB/T 10066 "Test methods for electrothermal and electromagnetic treatment devices" is divided into the following sections. --- Part 1. General part; --- Part 3. Heart induction furnace and centerless induction furnace; --- Part 31. Determination of the output power of generators of high frequency induction heating devices; --- Part 4. Indirect resistance furnace; ---Part 5. Plasma equipment for electrothermal and electrochemical; ---Part 6. Method for determining the output power of industrial microwave heating devices; ---Part 7. Electric heating equipment with electron guns; ---Part 8. Electroslag remelting furnace; ---Part 9. Determination of output power of high frequency dielectric heating devices; --- Part 10. Direct electric arc furnace; --- Part 11. Submerged arc furnace; --- Part 12. Infrared electric heating device. This part is the first part of GB/T 10066. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part replaces GB/T 10066.1-2004 "Test methods for electric heating equipment - Part 1. General part", and GB/T 10066.1- Compared with.2004, the main technical changes are as follows. --- The scope is extended to electromagnetic treatment devices and equipment including materials (see Chapter 1); --- Revised the normative reference documents and the guiding terms and related content of terms and definitions (see Chapters 2 and 3); --- Added comparisons, working loads, numerical simulations, energy (power) consumption and energy, including test boundaries, equipment or devices related to energy systems Effectiveness, the scope of the expected operation, and the terms of the surface performance of the treated work and related test methods, correspondingly increase the chapter Or change the name of the original chapter; --- Removed the "Measurement of Electromagnetic Compatibility" and "Measurement of Exhaust Gas (including Dust)" and its test methods (see.2004) Versions 7.2.5 and 7.2.7); --- Added informational appendix on energy efficiency assessment and mapping, energy efficiency and energy assessment (see Appendix B, Appendix C and Appendix D). This section uses the redrafting method to modify the use of IEC 60398.2015 "Electrical and electromagnetic treatment equipment general performance test methods." Compared with IEC 60398.2015, this part adds 4.8, 6.6, 6.8, 8, 9.2~9.16, 9.24, 9.25 to the structure. Prolonged. The technical differences between this part and IEC 60398.2015 and their reasons are as follows. ---About the normative reference documents, this part has made technical adjustments to adapt to China's technical conditions, adjustments The situation is reflected in Chapter 2, “Regulatory Citations”, and the specific adjustments are as follows. ● Replace IEC 60519-1 with GB/T 5959.1-2019 equivalent to the international standard; ● Added reference to GB 5226.1; --- Added the terminology and definition of "equipment capacity" for the convenience of standard users (see 3.1.3); --- Increased requirements for test instruments (see 4.8); --- Added "measurement of ambient temperature" in order to meet the actual needs of the country (see 6.6); --- Added "measurement of vacuum" (see 6.8); --- Added "test project" (see Chapter 8), in order to be more operational; --- Regarding the test method, in order to ensure the integrity of the test project, to adapt to the technical conditions of China, the specific adjustments are as follows. ● Added "Measurement of surface temperature of heated components" test (see 9.12); ● Added “Measurement of coolant flow” test (see 9.13); ● Added “Measurement of coolant temperature rise” test (see 9.14); ● Added “thermal test of the movement or action of the moving mechanism” (see 9.15); ● Added “Measurement of Working Vacuum” test (see 9.16); ● Added “Sound Level Measurement” test (see 9.24); ● Added “Appearance inspection after hot test” test (see 9.25). This section also made the following editorial changes. --- In order to be consistent with China's standard system, change the name of this part to "Test methods for electrothermal and electromagnetic treatment devices - Part 1. Use part". This part was proposed by China Electrical Equipment Industry Association. This part is under the jurisdiction of the National Technical Committee for Standardization of Industrial Electric Heating Equipment (SAC/TC121). This section drafted by. Xi'an Electric Furnace Research Institute Co., Ltd., Suzhou Zhenwu Electric Furnace Co., Ltd., Anhui Hanhe Electric Co., Ltd., Tianlong Technology Furnace (Wuxi) Co., Ltd., Dongguan Haitian Magnetic Industry Co., Ltd., Apu (Jiangshan) Electric Furnace Industrial Engineering Co., Ltd., National Electric Furnace Quality Supervision and Inspection Center, Xi'an Zhongye New Materials Co., Ltd., China Heat Treatment Industry Association. The main drafters of this section. Li Wei, Ge Huashan, Zhu Xingfa, Xiao Shangfa, Mao Runhui, Zhao Liwen, Yu Weijiang, Zou Zhaohui, Lu Zikai, Xu Zhaojun, Tong Binbin, Pang Helin. The previous versions of the standards replaced by this section are. ---GB 4001-1983; ---GB/T 10066.1-1988, GB/T 10066.1-2004. Test method for electrothermal and electromagnetic treatment devices Part 1. General part1 ScopeThis part of GB/T 10066 specifies industrial devices and equipment for determining various types of electrothermal (EH) or material electromagnetic treatment (EPM). The main performance parameters and basic test procedures, test conditions and test methods for the main operating characteristics. This section applies to the commissioning of the above-mentioned devices and equipment, the verification of design improvements or energy-related tasks, including the determination of energy use. Or energy efficiency benchmarks and marking. Some of the concepts in this section can be used directly as key performance indicators. This section does not apply to electric cooking and electric heating devices for household and similar purposes; nor is it suitable for heating and brazing in domestic and industrial rooms. Equipment and appliances for welding, welding or other similar purposes and for heating and heating roads, bridges, parking lots or any form of space Electric heating equipment. The detailed test methods for special types of electrothermal or material electromagnetic treatment equipment and devices are outside the scope of this section, and in their corresponding It is specified in the special test method. This section can be used as a test method for all future special types of electrothermal or material electromagnetic treatment equipment or devices. General reference.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB 5226.1 Mechanical electrical safety machinery and electrical equipment - Part 1. General technical conditions (GB 5226.1-2008, IEC 60204-1.2005, IDT) GB/T 5959.1-2019 Safety of electrothermal and electromagnetic treatment systems - Part 1. General requirements (GB/T 5959.1-2019, IEC 60519-1.2015, IDT) GB/T 23331 Energy Management System Requirements (GB/T 23331-2012, ISO 50001.2011, IDT) ISO /IEC 13273-1 General terms for energy efficiency and renewable energy - Part 1. Energy efficiency (Energy efficiency) renewableenergysources-CommoninternationalTerminology-Part 1.Energyefficiency) ISO /IEC Guide 99 International Metrology Vocabulary Basic and General Concepts and Related Terminology (VIM) [Internationalvocabu- laryofmetrology-Basicandgeneralconceptsandassociatedterms(VIM)]3 Terms and definitionsGB/T 5959.1-2019, ISO /IEC 13273-1, GB/T 23331, ISO /IEC Guide99 and the following terms and The definition applies to this document. For ease of use, some of the terms and definitions in ISO /IEC 13273-1 are repeated below. Note. The general definition is given in GB/T 2900 (all parts), and the term related to industrial electric heating is defined in GB/T 2900.23. 3.1 General terminology 3.1.1 Energy system An entity or organization that uses energy to determine the boundaries of the system. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10066.1-2019_English be delivered?Answer: Upon your order, we will start to translate GB/T 10066.1-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 10066.1-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10066.1-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 10066.1-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10066.1-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
