GB 6856-2008 English PDF

US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 6856-2008: pH primary reagent -- Sodium tetraborate decahydrate
Status: Valid

GB 6856: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB 6856-2008	189	Add to Cart	3 days	pH primary reagent -- Sodium tetraborate decahydrate	Valid
GB 6856-1986	199	Add to Cart	2 days	pH Basic line--Sodium tetraborate decahydrate	Obsolete

Similar standards

HG/T 3489   GB/T 6682   GB/T 6684   GB 6854   GB 6857   GB 6853   

Basic data

Standard ID: GB 6856-2008 (GB6856-2008)
Description (Translated English): pH primary reagent -- Sodium tetraborate decahydrate
Sector / Industry: National Standard
Classification of Chinese Standard: G61
Classification of International Standard: 71.040.30
Word Count Estimation: 8,854
Date of Issue: 2008-12-31
Date of Implementation: 2009-06-01
Older Standard (superseded by this standard): GB 6856-1986
Regulation (derived from): Announcement of Newly Approved National Standards No. 25 of 2008 (total 138)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Chinese standard specifies the reference reagent pH sodium tetraborate traits, specifications, testing, inspection and marking and packaging rules. This standard applies to pH reagent sodium tetraborate benchmark test. MF: Na2B4 O7 �� 10H2O Molecular weight: 381. 38 (according to 2007 international relative atomic mass).

GB 6856-2008: pH primary reagent -- Sodium tetraborate decahydrate

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
pH primary reagent.Sodium tetraborate decahydrate ICS 71.040.30 G61 National Standards of People's Republic of China Replacing GB 6856-1986 Posted 2008-12-31 2009-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

The standard Chapter 4, 5.3 are mandatory, other provisions are recommended. This standard replaces GB 6856-1986 "pH reference reagents sodium tetraborate," compared with GB 6856-1986 The main changes are as follows. --- PH (S) Ⅱ value (0.01mol/kg, 25 ℃) by the "pH (S) Ⅱ = pH (S) Ⅰ ± 0.005" to adjust "PH (S) Ⅱ = pH (S) Ⅰ ± 0.01" (1986 edition 1.1, chapter 4 of this edition); --- Modify the method for the determination (1986 version 2.2, this version 5.4); --- Adjust the sample amount of hydrochloric acid insoluble matter measured (1986 version 2.3.2, this version 5.6); --- Chlorides, sulfates two common methods use chemical reagents Determination (1986 edition 2.3.3,2.3.4, edition 5.7, 5.8); --- Modified phosphate, iron determination (2.3.5,2.3.9 1986 edition, this edition 5.9,5.13). The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Standardization Technical Committee Chemistry Chemicals Branch (SAC/TC63/SC3) centralized. This standard is drafted by. Beijing Institute of Chemical Reagents, China Institute of Metrology. The main drafters of this standard. Han Baoying, repair Hongyu. This standard was first published in 1986. Molecular formula. Na2B4O7 · 10H2O Molecular weight. 381.38 (according to 2007 international relative atomic mass)

1 Scope

This standard specifies the pH reference reagents sodium tetraborate characteristics, specifications, testing, packaging and inspection rules and signs. This standard applies to pH reference reagents sodium tetraborate test.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. Preparation of GB/T 601 chemical reagent standard titration solution GB/T 602 Determination of impurities in chemical reagents prepared standard solution (GB/T 602-2002, ISO 6353-1. 1982, NEQ) with GB/T 603 chemical reagent test method Preparations of articles (GB/T 603-2002, ISO 6353-1 with. 1982, NEQ) GB/T 610-2008 Chemical Reagent Determination of Arsenic in the general method (ISO 6353-1. 1982, NEQ) GB/T 6682 analytical laboratory use specifications and test methods (GB/T 6682-2008, ISO 3696. 1987, MOD) GB 6851 pH value reference reagent General GB/T 9723-2007 Chemicals flame atomic absorption spectrometry General GB/T 9727 General method for the determination of phosphate chemical reagent (GB/T 9727-2007, ISO 6353-1. 1982, NEQ) GB/T 9728 General method for determination of chemical reagents sulfate (GB/T 9728-2007, ISO 6353-1. 1982, NEQ) GB/T 9729 General method for determination of chloride Chemicals (GB/T 9729-2007, ISO 6353-1. 1982, NEQ) GB/T 9739 General method for determination of iron chemical reagents (GB/T 9739-2006, ISO 6353-1. 1982, NEQ) GB 15346 chemical reagent packaging and marking HG/T 3484 standard chemical reagents glass emulsion and clarity standards HG/T 3921 Chemicals sampling and acceptance rules

3 Characters

This reagent is colorless transparent crystalline powder, soluble in water and glycerin, insoluble in alcohol.

4 Specification

Sodium tetraborate as shown in Table 1. Table 1 Name pH reference Sodium tetraborate pH of the solution (S) Ⅱ value (0.01mol/kg, 25 ℃) pH (S) Ⅱ = pH (S) Ⅰ ± 0.01 Content (Na2B4O7 · 10H2O), /% ≥99.5 Clarity test/number ≤2 Table 1 (continued) Name pH reference Hydrochloric acid insoluble matter, /% ≤0.002 Chloride (Cl), /% ≤0.0005 Sulfate (SO4), /% ≤0.005 Phosphate (PO4), /% ≤0.001 Carbonate (CO3) Eligible Magnesium and calcium (Ca to count), /% ≤0.005 Potassium (K), /% ≤0.05 Iron (Fe), /% ≤0.0001 Arsenic (As), /% ≤0.0001 Heavy metals (Pb), /% ≤0.0005

5 Test

5.1 Warning Reagents used in this test method are toxic or corrosive, some of the testing process can lead to dangerous situations, the operator should take Appropriate safety and health practices. 5.2 General Provisions Unless specified otherwise in this chapter, the use of standard titration solution, standard solution, preparations and products, according to GB/T 601, GB/T 602, Regulations preparation, test water should be consistent with GB/T 6682 specifications in three water samples according to precise weighing 0.01g, the use of GB/T 603's Solution "%" are represented by the mass fraction. According to the provisions of GB 6851 was measured using a platinum electrode dihydrotestosterone. pH of sodium tetraborate (S) Ⅰ (0.01mol/kg, 25 ℃) by the The reference material certificates Richard. 5.4 Content Weigh 2.8g sample, accurate to 0.0001g, dissolved in 100mL of water, plus 20.00mL hydrochloric acid standard titration solution [Ba (HCl) = 1mol/L], add 1 drop of methyl red indicator solution (1g/L), titrated with standard sodium hydroxide solution [Ba (NaOH) = 1mol/L] titrated to yellow Color, when sodium hydroxide standard titration solution in an amount not count. Add 11g of mannitol, dissolved, 2 drops of phenolphthalein indicator solution (10g/L), hydrogen Sodium hydroxide standard titration solution [Ba (NaOH) = 1mol/L] titrated to a solution pink. The mass fraction of sodium tetraborate and its value is "%" means, according to equation (1). 100 (1) Where. Value Vp --- sodium hydroxide standard titration solution volume in milliliters (mL); Accurate Ba --- sodium hydroxide standard titration solution concentration value in units of moles per liter (mol/L); --- The M sodium tetraborate numerical molar mass in grams per mole (g/mol) [M (14 Na2B4O7 · 10H2O) = 95.34]; 5.5 Clarity test 7g weighed sample was dissolved in 7mL hydrochloric acid solution (20%) and 100mL hot water turbidity is not greater than HG/T 3484 stipulated No. 2 standard clarity. 5.6 hydrochloric acid insoluble matter Weigh 50g sample was dissolved in 500mL water and 50mL hydrochloric acid solution (20%), on the water bath for 1h, has been used in 105 ℃ ± 2 ℃ constant No. 4 glass filter crucible was filtered, the filter residue washed with hot water until no chlorine ions react lotion, dried in an electric oven at 105 ℃ ± 2 ℃ in Dry to constant weight. Residue mass not greater than 1.0mg. 5.7 Chloride Weigh 1g sample was dissolved in an appropriate amount of hot water, cooling, 1mL solution of nitric acid (25%), diluted to 20mL, press GB/T 9729 Determination of the provisions. The turbidity of the solution was not greater than the standard turbidity solution. Standard preparation turbid solution is to take the ratio of 0.005mg containing chloride (Cl) standard solution was diluted to 20mL, at the same time with the same volume of test solution The same treatment. 5.8 sulfate Weigh 0.5g sample was dissolved in 20mL water, cooled, washed with hydrochloric acid solution (20%), add 0.5mL hydrochloric acid solution, and (20%) acid After the technology, according to the provisions of GB/T 9728 Determination. The turbidity of the solution was not greater than the standard turbidity solution. Turbidity standard solution was prepared containing 0.025mg ratio is taken sulfate (SO4) standard solution was diluted to 20mL, and during and after the test solution While the same treatment. 5.9 Phosphate Weigh 0.5g sample was dissolved in an appropriate amount of hot water, add 2 drops of saturated 2,4-dinitrophenol indicator solution, a solution of nitric acid solution (13%) to yellow Just disappeared, after diluted to 10mL, according to the provisions of GB/T 9727 Determination. The organic layer was blue can not be deeper than the standard colorimetric solution. Preparation of the standard developing solution containing 0.005mg is to take the ratio of phosphate (PO4) standard solution, the same treatment simultaneously with the sample. 5.10 Carbonate 2g sample was weighed, dissolved in 40mL of water was added slowly 5mL hydrochloric acid solution (20%), no bubbles. 5.11 magnesium and calcium 10g samples were weighed, dissolved in 100mL hot water, cooling, 2mL solution of sodium sulfide (20g/L), 1mL ethylenediaminetetraacetic acid magnesium solution Solution [Ba (EDTA-Mg) = 0.01mol/L] and 10mL of ammonia - ammonium chloride buffer solution A (pH≈10), add 2 drops of chrome black T indicator solution, with Disodium edetate standard titration solution [Ba (EDTA) = 0.02mol/L] titration to the solution from purple to pure blue. Ethylenediamine Disodium standard titration solution [Ba (EDTA) = 0.02mol/L] in an amount not more than 0.62mL. 5.12 K Determined according to the provisions of GB/T 9723-2007 of. 5.12.1 Instrument Conditions Source. Potassium hollow cathode lamp; Wavelength. 766.5. nm; Flame. acetylene - air. 5.12.2 Determination 5g samples were weighed, dissolved in an appropriate amount of hot water, cooled and diluted to 50mL. Take 2mL, a total of four. According to GB/T 9723-2007 in 7.2.2 predetermined measurement results calculated according to the provisions of 7.2.3. 5.13 Iron 2g sample was weighed, dissolved in an appropriate amount of hot water, was cooled, was diluted to 15mL, after the solution pH was adjusted with hydrochloric acid solution (15%) 2, by The provisions of GB/T 9739 Determination. The red solution should not be deeper than the standard colorimetric solution. Preparation of the standard developing solution containing 0.002mg is to take the ratio of iron (Fe) standard solution was diluted to 15mL, at the same time with the same volume of sample solution The same treatment. 5.14 Arsenic Weigh 1g sample was dissolved in an appropriate amount of water and sulfuric acid solution (20%), diluted to 70mL. According to GB/T 610-2008 4.1 Determination of the provisions. Mercuric bromide paper that was brown not be deeper than the standard colorimetric test strips. Standard color strip ratio is prepared to take 0.0001mg containing arsenic (As) standard solution and the sample solution and at the same time after the same treatment. Book GB 6856-2008 5.15 Heavy Metal 4g weighed sample was dissolved in an appropriate amount of hot water, treated with acetic acid (glacial acetic acid), diluted to 40mL, cooling. Take 30mL, add 0.2mL B Acid (30%) of freshly prepared saturated hydrogen sulfide and water 10mL, shake, place 10min. The solution was dark can not be deeper than the standard colorimetric solution. Standard Preparation of color solution ratio is to take the remaining 10mL sample solution and standard solution containing 0.01mg of lead (Pb), diluted to 30mL, simultaneously with the same volume of the same treated sample solution.

6 Inspection rules

3921 according to the provisions of HG/T sampling and acceptance.

7 Packaging and marking

According to GB 15346 requirements for packaging, storage and transportation, and flags are given, including. Inner packaging. NB-5, NBY-5; Packaging forms. WB-1; Packing unit. Class 2, Class 3. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 6856-2008_English be delivered?

Answer: Upon your order, we will start to translate GB 6856-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 6856-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB 6856-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB 6856-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 6856-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.