GB 6854-2008 English PDF

US$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 6854-2008: pH primary reagent -- Disodium hydrogen phosphate
Status: Valid

GB 6854: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB 6854-2008	169	Add to Cart	3 days	pH primary reagent -- Disodium hydrogen phosphate	Valid
GB 6854-1986	199	Add to Cart	2 days	pH Basic line--Disodium hydrogen phosphate	Obsolete

Similar standards

HG/T 3489   GB/T 6682   GB/T 6684   GB 6856   GB 6857   GB 6853   

Basic data

Standard ID: GB 6854-2008 (GB6854-2008)
Description (Translated English): pH primary reagent -- Disodium hydrogen phosphate
Sector / Industry: National Standard
Classification of Chinese Standard: G61
Classification of International Standard: 71.040.30
Word Count Estimation: 7,770
Date of Issue: 2008-12-31
Date of Implementation: 2009-06-01
Older Standard (superseded by this standard): GB 6854-1986
Quoted Standard: GB/T 601; GB/T 602; GB/T 603; GB/T 610-2008; GB/T 6682; GB 6851; GB/T 9723-2007; GB/T 9724; GB/T 9725; GB/T 9735; GB/T 9738; GB 15346; HG/T 3484; HG/T 3921
Regulation (derived from): Announcement of Newly Approved National Standards No. 25 of 2008 (total 138)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Chinese standard specifies the reference reagent pH traits disodium hydrogen phosphate, specifications, testing, inspection and marking and packaging rules. This standard applies to pH reference reagent disodium hydrogen phosphate test.

GB 6854-2008: pH primary reagent -- Disodium hydrogen phosphate

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
pH primary reagent.Disodium hydrogen phosphate ICS 71.040.30 G61 National Standards of People's Republic of China Replacing GB 6854-1986 Posted 2008-12-31 2009-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

The standard Chapter 4, 5.3 are mandatory, other provisions are recommended. This standard replaces GB 6854-1986 "pH reference reagent disodium hydrogen phosphate," compared with GB 6854-1986 The main changes are as follows. --- Mixed phosphate pH of the solution (S) Ⅱ value (0.025mol/kg, 25 ℃) by the "pH (S) Ⅱ = pH (S) Ⅰ ± 0.005" to adjust "PH (S) Ⅱ = pH (S) Ⅰ ± 0.01" (1986 edition 1.1, chapter 4 of this edition); --- Project Name "reaction solution" to "pH value" (1986 version 1.3,2.3, edition Chapter 4, 5.5); --- Adjust the water insoluble, sampling the amount of sulfate (2.4.2,2.4.4 1986 edition, this edition 5.7,5.9); --- PH value, heavy metals and two common methods use chemical reagents Determination (1986 edition 2.3,2.4.10, this edition 5.5,5.15). The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Standardization Technical Committee Chemistry Chemicals Branch (SAC/TC63/SC3) centralized. This standard is drafted by. Beijing Institute of Chemical Reagents, China Institute of Metrology. The main drafters of this standard. Han Baoying, repair Hongyu. This standard was first published in 1986. Molecular formula. Na2HPO4 Molecular weight. 141.96 (according to 2007 international relative atomic mass)

1 Scope

This standard specifies the reference reagent pH in sodium phosphate dibasic traits, specifications, testing, packaging and inspection rules and signs. This standard applies to pH reference reagent disodium hydrogen phosphate test.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. Preparation of GB/T 601 chemical reagent standard titration solution GB/T 602 Determination of impurities in chemical reagents prepared standard solution (GB/T 602-2002, ISO 6353-1. 1982, NEQ) with GB/T 603 chemical reagent test method Preparations of articles (GB/T 603-2002, ISO 6353-1 with. 1982, NEQ) GB/T 610-2008 Chemical Reagent Determination of Arsenic in the general method (ISO 6353-1. 1982, NEQ) GB/T 6682 analytical laboratory use specifications and test methods (GB/T 6682-2008, ISO 3696. 1987, MOD) GB 6851 pH value reference reagent General GB/T 9723-2007 Chemicals flame atomic absorption spectrometry General GB/T 9724 General rule for determination of pH chemical reagent (GB/T 9724-2007, ISO 6353-1. 1982, NEQ) GB/T 9725 General Chemical Reagents potentiometric titration (GB/T 9725-2007, ISO 6353-1. 1982, NEQ) GB/T 9735 General method for determination of heavy metals Chemicals (GB/T 9735-2008, ISO 6353-1. 1982, NEQ) GB/T 9738 Chemicals water insoluble determination General method (GB/T 9738-2008, ISO 6353-1. 1982, NEQ) GB 15346 chemical reagent packaging and marking HG/T 3484 standard chemical reagents glass emulsion and clarity standards HG/T 3921 Chemicals sampling and acceptance rules

3 Characters

This reagent as white crystals, deliquescent, soluble in water, soluble in alcohol.

4 Specification

Disodium hydrogen phosphate as shown in Table 1. Table 1 Name pH reference Mixed phosphate pH of the solution (S) Ⅱ value (0.025mol/kg, 25 ℃) pH (S) Ⅱ = pH (S) Ⅰ ± 0.01 Content (Na2HPO4), /% 99.0 ~ 100.1 pH (20g/L, 25 ℃) 9.1 ~ 9.3 Table 1 (continued) Name pH reference Clarity test/number ≤2 Water-insoluble, /% ≤0.002 Chloride (Cl), /% ≤0.002 Sulfate (SO4), /% ≤0.005 Nitrate (NO3), /% ≤0.001 Magnesium (Mg), /% ≤0.001 Potassium (K), /% ≤0.02 Iron (Fe), /% ≤0.001 Arsenic (As), /% ≤0.0005 Heavy metals (Pb), /% ≤0.0005

5 Test

5.1 Warning Reagents used in this test method are toxic or corrosive, some of the testing process can lead to dangerous situations, the operator should take Appropriate safety and health practices. 5.2 General Provisions Unless specified otherwise in this chapter, the use of standard titration solution, standard solution, preparations and products, according to GB/T 601, GB/T 602, Regulations preparation, test water should be consistent with GB/T 6682 specifications in three water samples according to precise weighing 0.01g, the use of GB/T 603's Solution "%" are represented by the mass fraction. According to the provisions of GB 6851 was measured using a platinum electrode dihydrotestosterone. Mixed phosphate pH of the solution (S) Ⅰ (0.025mol/kg Na2HPO4,0.025mol/kgKH2PO4) certificate by the standard substance used to look up. 5.4 Content Weigh 2g sample dried to constant weight at 110 ℃ ± 2 ℃, accurate to 0.0001g. No carbon dioxide dissolved in 100mL of water, Determined according to the provisions of GB/T 9725's. With hydrochloric acid standard titration solution [Ba (HCl) = 0.5mol/L] titrated to a pH value of 4.2 as the end point. Disodium hydrogen phosphate content and its value is "%" means, according to equation (1). 100 (1) Where. Value Vp --- hydrochloric acid standard titration solution volume in milliliters (mL); Ba --- accurate hydrochloric acid standard titration solution concentration value in units of moles per liter (mol/L); --- The M disodium hydrogenphosphate numerical molar mass in grams per mole (g/mol) [M (Na2HPO4) = 141.96]; Weigh 2g sample was dissolved in 100mL of carbon dioxide-free water, determined according to the provisions of GB/T 9724's. 5.6 Clarity test Clarity Standard No. 2 Weigh 10g sample was dissolved in 100mL of water, turbidity is not greater than HG/T 3484 stipulated. 5.7 Water insoluble matter Weigh 50g sample was dissolved in 250mL of water in the water bath for 1h, determined according to the provisions of GB/T 9738's. 5.8 Chloride Weigh 1g sample was dissolved in 25mL water, add 2mL nitric acid (25%) and 1mL silver nitrate (17g/L), shake for 10min. The turbidity of the solution was not greater than the standard turbidity solution. Preparation of the standard solution is to take the turbidimetric 0.02mg containing chloride (Cl) standard solution, the same treatment simultaneously with the sample. 5.9 sulfate Weigh 0.2g sample was dissolved in 10mL water, add 5mL "Ethanol (95%)", 1mL hydrochloric acid solution (10%), shaking continuously dropwise Add 3mL barium chloride solution (250g/L), diluted to 25mL, shake, place 10min. Turbidity can not be larger than the standard turbidity solution was Solution. Turbidity standard solution was prepared containing 0.01mg ratio is taken sulfate (SO4) standard solution, the same treatment simultaneously with the sample. 5.10 Nitrate Weigh 1g sample was dissolved in 10mL of water, add 1mL sodium chloride solution (100g/L) and indigo carmine solution 1mL [Ba (C16H8N2Na2O8S2) = 0.001mol/L], with shaking in the 10s ~ 15s added 10mL sulfuric acid, placed 10min. Solution The blue shall not be lighter than the standard colorimetric solution. Preparation of standard color solution is to take the ratio of 0.01mg containing nitrate (NO3) standard solution, and treated in the same sample at the same time. 5.11 Magnesium 5.11.1 prepared from magnesium disodium hydrogen phosphate solution 20g samples were weighed, dissolved in 200mL of water, add 4mL hydrochloric acid solution (20%), 4g of ammonium chloride, heated to boiling, add ammonia 40mL Solution (10%), shake 12h ~ 18h. Supernatant. 5.11.2 Determination 10g samples were weighed, dissolved in 100mL water, add 2mL of hydrochloric acid solution (20%) (filtered if necessary), 2G chloride, heated to boiling, Fractional added 25mL aqueous ammonia solution (10%), shake 12h ~ 18h. The precipitation may not be greater than the standard turbidity solution. Standard preparation turbid solution is to take the ratio of 122mL of disodium hydrogen phosphate solution containing Mg and not containing 0.10mg of magnesium standard solution (Mg), plus Heat to boiling, add 5mL ammonia solution (10%), with the same volume of the test solution at the same time the same treatment. 5.12 K Determined according to the provisions of GB/T 9723-2007 of. 5.12.1 Instrument Conditions Source. Potassium hollow cathode lamp; Wavelength. 766.5nm; Flame. acetylene - air. 5.12.2 Determination Weigh 0.5g sample was dissolved in water and diluted to 100mL. Take 20mL, a total of four. According to GB/T 9723-2007 7.2.2 Regulation Fixed measurement results calculated according to the provisions of 7.2.3. 5.13 Iron 1g sample was weighed, dissolved in 20mL of water, add 1mL hydrochloric acid solution (10%), 2mL 5-sulfosalicylic acid dihydrate solution (100g/L), shake, (10%) plus 5mL ammonia solution, shake. The yellow solution can not be deeper than the standard colorimetric solution. Preparation of the standard solution is to take the colorimetric containing 0.01mg of iron (Fe) standard solution, the same treatment simultaneously with the sample. 5.14 Arsenic Weigh 0.5g sample was dissolved in 70mL water, measured by the GB/T 610-2008 4.1 requirements. Brown mercuric bromide paper that was No deeper than the standard colorimetric test strips. Standard color strip ratio is prepared to take 0.0025mg containing arsenic (As) standard solution, and treated in the same sample at the same time. 5.15 Heavy Metal Weigh 4g sample is dissolved in water, acetic acid (glacial acetic acid) and diluted to 20mL. Take 15mL, according to the provisions of GB/T 9735 measured set. The solution was dark can not be deeper than the standard colorimetric solution. Book GB 6854-2008 Preparation of the standard developing solution is to take the ratio of the remaining sample solution and the standard solution 5mL 0.01mg containing lead (Pb), diluted to 15mL, With the same volume of test solution at the same time the same treatment.

6 Inspection rules

According to the provisions of HG/T 3921 is sampled and acceptance.

7 Packaging and marking

According to GB 15346 requirements for packaging, storage and transportation, and flags are given, including. Inner packaging. NB-4NB-5; Packaging forms. WB-1; Packing unit. Class 2, Class 3. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 6854-2008_English be delivered?

Answer: Upon your order, we will start to translate GB 6854-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 6854-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB 6854-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB 6854-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 6854-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.