GB 50394-2007 PDF EnglishUS$115.00 · In stock · Download in 9 seconds
GB 50394-2007: Code of design for intrusion alarm systems engineering Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB 50394-2007: Code of design for intrusion alarm systems engineering---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB50394-2007THE PEOPLE'S REPUBLIC OF CHINA UDC GB P GB 50394-2007 Code of Design for Intrusion Alarm Systems Engineering Issued on March 21, 2007 Implemented on August 1, 2007 Jointly issued by Ministry of Construction (MOC) and General Administration of Quality Supervision, Inspection and Quarantine (GAQSIQ) of the People's Republic of China 1Foreword According to the requirements of Document Jian Biao [2001] No.87 "Notice on Printing the Development and Revision Plan of National Engineering Construction Standards from 2000 to 2001" issued by the Ministry of Construction, the drafting group of this code carefully summarizes the domestic practical experiences in intrusion alarm system engineering, makes reference to the engineering standards of the relevant domestic and international industries, broadly solicits for the suggestions from relevant domestic technologists and administrative organizations, and formulated this code finally. This code is the supporting standard of "Technical Code for Engineering of Security and Protection System" GB 50348, is one of the basic standards for the engineering construction of safety and protection system, and also the important technical guarantee for the quality of safety and protection engineering construction and the personal safety of citizens as well as the property security of state, group and individuals. This code comprises 10 chapters with the main contents including. General Provisions, Terms, Basic Provisions, System Constitution, System Design, Equipment Selection and Installation, Transmission Mode, Wire Cable Selection and Wiring, Power Supply, Lightning Protection and Grounding, System Safety, Reliability, Electromagnetic Compatibility, Environmental Compatibility and Monitoring Center. The provisions in bold in this code are compulsory provision and must be enforced strictly and must be enforced strictly. Ministry of Construction t is in charge of the administration of this code and the explanation of the compulsory provisions, and the Ministry of Public security is responsible for the current management of this code. The Technical Committee on Security and Protection Alarm Systems of Standardization Administration of China is responsible for the explanation of the specific technical contents of this code. The relevant opinions and advice on the amendments and supplements of this code in the actual practices during the process of implementing this code, whenever necessary, are kindly requested to be posted or passed on to the Secretariat of the Technical Committee on Security and Protection Alarm Systems of Standardization Administration of China (No. 1, Southern Road Capital Gym, Beijing, China, Postcode. 100044, Tel. 86+10-88512998, Fax. 010-88513960, E-mail. tcl00sjl@_263.net) with a view to being referred in amendments. The chief development organization, participating development organizations and chief drafting staffs of this code are. Chief Development Organization. Technical Committee on Security and Protection Alarm Systems of Standardization Administration of China Participating development organizations. No.212 Institute of China North Industries Group Corporation Xi'an Beijing Information Industry Co., Ltd. Department of Public Security & Science and Technology Department of Shaanxi Province Chief drafting staffs. Li Tianluan, Shi Juling, Liu Xiqing, Wan Jun, and Jin Wei. Table of Contents1 General Provisions... 1 2 Terms ... 2 3 Basic Provisions ... 4 4 System Constitutions ... 5 5 System Design ... 7 5.1 Design of Longitudinal-depth Protection Systems ... 7 5.2 Function and Performance Design of System... 7 6 Equipment Selection and Installation ... 9 6.1 Detector ... 9 6.2 Controller... 10 6.3 Wireless Devices... 10 6.4 Management Software ... 11 7 Transmission Mode, Wire Cable Selection And Wiring ... 12 7.1 Transmission Mode... 12 7.2 Wire Cable Selection ... 12 7.3 Wiring Design... 12 8 Power Supply, Lightning Protection and Grounding... 14 9 System Safety, Reliability, ELECTROMAGNETIC COMPATIBILITY and Environmental Compatibility... 14 10 Monitoring Center ... 16 Annex A Design Process and Depth ... 17 Annex B Selection Requirements of Common Intrusion Detector... 21 Wording Explanation ... 26 11 General Provisions 1.0.1 This code was formulated with a view to regulating the design of intrusion alarm system engineering, improving the quality of intrusion alarm system engineering and protecting the personal safety of citizens and safety of the national, collective and personal properties. 1.0.2 This code is applicable to the design of intrusion alarm system engineering of the new, rebuilt and extended various buildings (structures) and their groups for the purpose of safety precaution. 1.0.3 Construction of the intrusion alarm systems engineering shall be uniformly planned together with the design of the building and its strong/light current systems. It may be completed once or in steps according to the practical situation. 1.0.4 Intrusion alarm system engineering shall be provided with safety, reliability, openness, expandability and flexibility in application and shall live up to state-of-the-art technologies, economy and rationality, practicality and reliability. 1.0.5 Except for those requirements stipulated in this code, those in the current relevant technical standards of the nation also shall be complied with for the design of intrusion alarm system engineering. 22 Terms 2.0.1 Intruder alarm system (IAS) Electronic system or network is used to detect and display behaviors intruding or trying to intrude the set condition area (including triggering the emergency alarm switches on purpose when facing the conditions of being hijacked or robbed or other emergent conditions through subjective judgment) and give out alarm messages by sensor technology and electronic information technology. 2.0.2 Alarm condition State refers the system makes response and alarm when risks are detected. 2.0.3 Fault condition It refers to the state in which the system can not work normally in line with the design requirement. 2.0.4 Tamper alarm Alarm is caused by triggering tamper detectors. 2.0.5 Tamper device Parts, components or partial of them are used to detect dismantling or opening the alarm system. 2.0.6 Set condition Operation makes the entire or partial defence area of the system on alert. 2.0.7 Unset condition Operation makes the entire or partial defence area of the system off alert. 2.0.8 Defence area It refers to area where the protected objects are protected by the detector (including the emergency alarm switches) and the alarm positions can be definitely displayed on the controllers. 2.0.9 Perimeter It refers to the boundary of area requiring physical protection or/and electronic protection. 2.0.10 Surveillance area Area is between the boundary of protection area and the perimeter guide line composed by the physical perimeter protection system and/or electronic perimeter protection system. 2.0.11 Protection area Area or position is allowed to access by the public and is the location of the protected objects. 2.0.12 Restricted area Protection area ... ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB 50394-2007 be delivered?Answer: The full copy PDF of English version of GB 50394-2007 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB 50394-2007_English with my colleagues?Answer: Yes. The purchased PDF of GB 50394-2007_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 50394-2007 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB 50394-2007?A step-by-step guide to download PDF of GB 50394-2007_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB 50394-2007". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
