GB 42301-2022 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB 42301-2022	509	Add to Cart	5 days	Technical specifications for the development of public health core capacities at points of entry/exit	Valid

Similar standards

GBZ 57   GBZ 20   AQ 4273   GB/T 45634   GB/T 45635   

Basic data

Standard ID: GB 42301-2022 (GB42301-2022)
Description (Translated English): Technical specifications for the development of public health core capacities at points of entry/exit
Sector / Industry: National Standard
Classification of Chinese Standard: C62
Classification of International Standard: 03.120.20
Word Count Estimation: 26,247
Date of Issue: 2022-12-29
Date of Implementation: 2024-01-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB 42301-2022: Technical specifications for the development of public health core capacities at points of entry/exit

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 03.120.20 CCSC62 National Standards of People's Republic of China Technical specifications for core capacity building of port public health Released on 2022-12-29 2024-01-01 Implementation State Administration for Market Regulation Released by the National Standardization Management Committee

table of contents

Preface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Port Type and Classification 3 5 Competency Requirements 3 6 Risk Prevention and Control Capabilities 3 6.1 General requirements 3 6.1.1 Risk identification and monitoring 3 6.1.2 Risk assessment and early warning 5 6.1.3 Risk treatment 6 6.2 Upgrade requirements 7 7 Emergency Response Capability 9 7.1 General requirements 9 7.1.1 Emergency organization and guarantee 9 7.1.2 Emergency plan and drill 9 7.1.3 Emergency response and disposal 9 7.2 Upgrade requirements 11 8 Technical support ability 12 8.1 General requirements 12 8.1.1 Collaboration capabilities12 8.1.2 Detection capability 12 8.1.3 Quality Control 12 8.1.4 Biosafety management13 8.1.5 Facilities and equipment 13 8.2 Upgrade requirements 13 9 Authentication method 14 9.1 Verification method 14 9.2 Verify content 14 9.2.1 Risk prevention and control capability verification 14 9.2.2 Verification of emergency response capability 15 9.2.3 Technical Support Capability Verification 15 9.3 Result Judgment 16 Appendix A (Normative) Testing List for Technical Support Capability Requirements 17 Reference 19

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents" to be drafted. Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed and managed by the General Administration of Customs of the People's Republic of China.

Introduction

The core capacity of port public health is the "International Health Regulations (2005)" that states parties carry out public health risk monitoring at designated ports, The ability requirements for early warning and response to public health emergencies are an important part of building a port public health system with Chinese characteristics in the new era. Implement the technical measures of "continuously consolidating and improving the core capabilities of ports" in the "Healthy China 2030" Planning Outline. This document is matched with the national port public health core capacity building management regulations and verification rules, aiming to establish a sound port public health system. Institutional system for the construction of students' core capabilities to achieve the following goals. ---Strengthen the quarantine defense line at the port; --- Improve the port public health system; ---Enhance the soft power of international public health governance. Technical specifications for core capacity building of port public health

1 Scope

This document specifies the general requirements and promotion requirements for the construction of core public health capabilities at ports, and describes the corresponding verification methods. This document is applicable to the public health core capacity building of air, water transport, highway and railway ports approved by the state to be opened to the outside world. Pro Please refer to this document for the technical requirements of the open ports and the pre-acceptance of the ports. This document does not apply to cross-border passages, frontier bazaar trade areas, and inbound vehicles, containers, goods, and articles in non-port areas Sanitation quarantine inspection and sanitation treatment places.

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document. GB 2761 National Food Safety Standard Limits of Mycotoxins in Food GB 2762 National Food Safety Standard Limits of Contaminants in Food GB 2763 National Food Safety Standard Maximum Residue Limits of Pesticides in Food GB 3552 Standards for the Control of Discharge of Water Pollutants from Ships GB 5749 Hygienic Standards for Drinking Water GB 14881 National Food Safety Standard General Hygienic Practices for Food Production GB 16889 Pollution Control Standards for Landfill Sites of Domestic Waste GB 17051 Hygienic Code for Secondary Water Supply Facilities GB 18466 Discharge Standard of Water Pollutants for Medical Institutions GB 19489 General Requirements for Laboratory Biosafety GB/T 23346 Food Good Distribution Practice GB/T 27025 General requirements for the competence of testing and calibration laboratories GB/T 27404 Laboratory Quality Control Specifications for Physical and Chemical Testing of Food GB/T 27405 Laboratory Quality Control Specifications for Food Microbiological Testing GB/T 27770 Vector biological density control level rodents GB/T 27771 Vector Biodensity Control Level Mosquitoes GB/T 27772 Vector density control level flies GB/T 27773 Vector density control level cockroaches GB 29921 National Food Safety Standard Limits of pathogenic bacteria in prepackaged foods GB 31650 National Food Safety Standard Maximum Residue Limits of Veterinary Drugs in Food GB/T 31712 Technical Specifications for Integrated Management of Vector Organisms Environmental Control for Rodents GB/T 31717 Technical specifications for integrated management of vector organisms Environmental management of mosquitoes GB/T 32146.1 Technical requirements for design and construction of inspection and testing laboratories Part 1.General requirements GB/T 32146.3 Technical Requirements for Design and Construction of Inspection and Testing Laboratories Part 3.Food Laboratories ......

Image