US$459.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 30439.1-2013: Safety requirements for industrial automation products -- Part 1: General requirements
Status: Valid
| Standard ID | USD | BUY PDF | Lead-Days | Standard Title (Description) | Status |
| GB 30439.1-2013 | 459 |
Add to Cart
|
4 days
|
Safety requirements for industrial automation products -- Part 1: General requirements
| Valid |
Basic data
Standard ID: GB 30439.1-2013 (GB30439.1-2013)
Description (Translated English): Safety requirements for industrial automation products -- Part 1: General requirements
Sector / Industry: National Standard
Classification of Chinese Standard: N10
Classification of International Standard: 19.080; 25.040.01
Word Count Estimation: 20,254
Quoted Standard: GB/T 4213-2008; GB 4793.1-2007; GB/T 7635.1-2002; GB/T 11918-2001; GB/T 11919-2001; GB/T 15969.2-2008; GB 30439.2; GB 30439.3; GB 30439.4; GB 30439.5; GB 30439.6; GB 30439.7; GB 30439.8; GB 30439.9; GB 30439.10; GB 30439.11; GB 30439.12; GB 30439.13; GB 3
Regulation (derived from): National Standards Bulletin 2013 No. 27
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the protection against electric shock and electrical burns, anti mechanical hazards of industrial automation products, anti-flame spread outward from the equipment against excessive temperature, affect the fluid and the fluid press
GB 30439.1-2013: Safety requirements for industrial automation products -- Part 1: General requirements
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Safety requirements for industrial automation products.Part 1. General requirements
ICS 19.080; 25.040.01
N10
National Standards of People's Republic of China
Safety requirements for industrial automation products
Part 1. General
Part 1. Generalrequirements
Issued on. 2013-12-31
2015-01-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
In addition to all the technical content of GB 30439 Appendix A of this section is mandatory.
GB 30439 "Industrial Automation product safety requirements" is currently divided into 18 parts.
--- Part 1. General;
--- Part 2. pressure/differential pressure transmitter safety requirements;
--- Part 3. Temperature Transmitter safety requirements;
--- Part 4. Safety requirements for the control valve;
--- Part 5. flowmeter safety requirements;
--- Part 6. solenoid valve safety requirements;
--- Part 7. loop controller safety requirements;
--- Part 8. Safety requirements for electric actuators;
--- Part 9. Digital display instrument safety requirements;
--- Part 10. recording instrument safety requirements;
--- Part 11. Programmable Controller safety requirements;
--- Part 12. Echo Ranging (TOF) Level Meter safety requirements;
--- Part 13. magnetostrictive level gauge safety requirements;
--- Part 14. Power meter safety requirements;
--- Part 15. industrial process measurement and control signal distribution, isolation, conversion, alarm processing unit safety requirements;
--- Part 16. Safety requirements for differential pressure flow meter;
--- Part 17. Safety requirements for the ultrasonic flowmeter;
--- Part 18. Safety requirements for pressure gauge auxiliary device.
This is Part 1 GB 30439's.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This part is proposed by China Machinery Industry Federation.
This part of the National Industrial Process Measurement and Control Standardization Technical Committee (SAC/TC124), the national measurement, control and laboratory electric
Device Security Standardization Technical Committee (SAC/TC338) centralized.
This section is drafted. Machinery Industrial Instrumentation Technology and Economy Institute, Shanghai Institute of Industrial Automation Instrumentation, Shanghai Auto
Instrumentation Co., Southwest University, Chongqing Sichuan Instrument Factory Co., Ltd., Zhejiang control Automation Instrumentation Co., Fujian on the Run Precision
Instrument Co., Ltd., Chongqing Wei detector Manufacturing Company, Xi'an Institute of Automation Instrumentation.
The main drafters of this section. Mei Ke, including Wei-hua, Li Jiajia, Zhou Xuelian, Pu Huang Yi, Ding Yun, Ge Jian, TANG Tian, Fan Lijun, Wang Jianhua,
Liu Xiaojing, Cheng Yuk.
Safety requirements for industrial automation products
Part 1. General
1 Scope
This section GB 30439 provisions of industrial automation products and electrical burns against electric shock, against mechanical hazards and fire prevention equipment from the inside out
Spread against excessive heat, fluid-fluid pressure and the influence of radiation impact (including lasers, sound and ultrasonic pressure) and release of gas
Body, explosion and implosion of security content.
This section does not include security features and device-independent, performance or other characteristics, the effectiveness of transport packaging, electromagnetic compatibility (EMC) to
Requirements, functional safety, environmental protection measures for the explosion, maintenance (repair), maintenance (repair) personnel protection.
If you want other industrial automation products for the environment (such as buildings, medical, etc.), automation products must also meet applicable to the respective
Special environmental requirements, standards and installation guidelines.
This section applies to industrial manufacturing or processing, continuous automatic measurement, temperature control, material or product, pressure, flow and other parameters
The amount of industrial automation systems, instruments and devices. This section also applies to the predetermined attachment and automation products used together (such as instrument calibration
Means).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 4213-2008 pneumatic control valve
GB 4793.1-2007 measurement, control and laboratory safety requirements for electrical equipment - Part 1. General requirements
GB/T 7635.1-2002 national main product categories and codes - Part 1. Transportation Products
GB/T 11918-2001 industrial plug and socket couplers - Part 1. General requirements
GB/T 11919-2001 industrial plug and socket coupling - Part 2. With pin and sleeve size interchangeable electrical accessories
Requirements
GB/T 15969.2-2008 Programmable Controllers Part 2. Equipment Requirements and Tests
GB 30439.2 industrial automation product safety requirements - Part 2. Safety requirements for pressure/differential pressure transmitter
GB 30439.3 Industrial Automation Products Safety requirements - Part 3. Safety requirements Temperature Transmitter
GB 30439.4 industrial automation product safety requirements - Part 4. Safety requirements for control valves
GB 30439.5 industrial automation product safety requirements - Part 5. Safety requirements Flowmeter
GB 30439.6 industrial automation product safety requirements - Part 6. Safety requirements for solenoid valves
GB 30439.7 industrial automation product safety requirements - Part 7. Safety requirements loop controller
GB 30439.8 Safety requirements for industrial automation products Part 8. Safety requirements for electric actuators
GB 30439.9 industrial automation product safety requirements - Part 9. Safety requirements for digital display instrument
GB 30439.10 Safety requirements for industrial automation products - Part 10. Safety requirements for recording instrument
GB 30439.11 Safety requirements for industrial automation products - Part 11. Safety requirements for programmable controllers
GB 30439.12 Safety requirements for industrial automation products - Part 12. Echo Ranging (TOF) Level Meter safety requirements
GB 30439.13 Safety requirements for industrial automation products - Part 13. magnetostrictive level gauge safety requirements
GB 30439.14 Safety requirements for industrial automation products - Part 14. Safety requirements for power meter
GB 30439.15 Safety requirements for industrial automation products - Part 15. industrial process measurement and control signal distribution, isolated, turn
Change, security alarm processing unit requirements
Part 16 GB 30439.16 Safety requirements for industrial automation products. Safety requirements for differential pressure flow meter
GB 30439.17 Safety requirements for industrial automation products - Part 17. Safety requirements for the ultrasonic flowmeter
GB 30439.18 Safety requirements for industrial automation products - Part 18. Safety requirements for pressure gauge support device
IEC 60027-3.2002 Letter symbols used in electrical technology - Part 3. Logarithmic and related quantities, and their units (Lettersymbolsto
beusedinelectricaltechnology-Part 3. logarithmicandrelatedquantities, andtheirunits)
IEC 60664-3.2003 in the low-voltage system insulation coordination for equipment - Part 3. antipollution with potting or die coating use
(Insulationcoordinationforequipmentwithinlow-voltagesystems-Part 3. useofcoating, pottingor
mouldingforprotectionagainstpolution)
3 Terms and Definitions
GB 4793.1-2007 and GB/T 15969.2-2008 and as defined in the following terms and definitions apply to this document. In order to facilitate
Use the following list of repeated GB 4793.1-2007 and GB/T 15969.2-2008 in some terms and definitions.
Category 3.1 equipment and devices
3.1.1
Stationary equipment fixedequipment
Fixed to the support member or an additional fixture at a specific location.
[GB 4793.1-2007, the definition 3.1.1]
3.1.2
PERMANENTLY CONNECTED EQUIPMENT permanentlyconnectedequipment
Scheduled to use screw terminals or other reliable methods and building installation wiring connected device.
[GB 4793.1-2007, the definition 3.1.2]
3.1.3
Portable device portableequipment
A closed system, it can be moved in operation, along with the power supply or can it be easily moved from one location to another. example
For example, programming and debugging tool (PADT) and test equipment (TE).
[GB 4793.1-2007, the definition 3.1.3]
3.1.4
Tools tool
To help people to perform some kind of mechanical function and use, including keys and coins, including an external device.
[GB 4793.1-2007, the definition 3.1.5]
3.2 Parts and Accessories
3.2.1
Protective conductor protectiveconductor
For security purposes (for example, protection against electric shock) to provide a conductor.
[GB/T 15969.2-2008, the definition 3.53]
3.2.2
Housing enclosure
Provide protection suitable for the intended application and the type of housing protection rating.
[GB/T 15969.2-2008, the definition 3.19]
3.3 Electrical values
3.3.1
Rated (value) rated (value)
Usually by the manufacturer for the components, apparatus, or device reaches a given magnitude of working status. [IEV151-04-03]
3.3.2
Rating rating
A set of ratings and working conditions. [IEV151-04-04]
3.4 Test
3.4.1
Type test typetest
For one or more products of the project done by a representative compliance testing.
[GB 4793.1-2007, the definition 3.4.1]
3.4.2
Routine tests (routine tests) routinetest
During or after the manufacturing of various technical indicators do conformance testing.
[GB 4793.1-2007, the definition 3.4.2]
3.5 Security Terminology
3.5.1
(Parts) palpable accessible (ofapart)
GB 4793.1-2007 in accordance with the provisions of 6.2 can be the standard test finger or test pin to the touch.
[GB 4793.1-2007, the definition 3.5.1]
3.5.2
Dangerous hazard
Potential source of harm.
[GB 4793.1-2007, the definition 3.5.2]
3.5.3
Hazardous live hazardouslive
It means capable of causing electrical shock or burns under normal conditions of use or single fault condition.
Under normal conditions of use apply to the value of GB 4793.1-2007 see 6.3.1; for under a single fault condition values see GB 4793.1-
2007 6.3.2.
[GB 4793.1-2007, the definition 3.5.3]
3.5.4
Power supply mains
It is designed to make about the device connected thereto need for equipment to provide electricity for the purpose of low voltage power supply system.
[GB 4793.1-2007, the definition 3.5.5]
3.5.5
MAINS circuit mainscircuit
Intended to be connected to the power grid, providing power for the device circuitry.
[GB 4793.1-2007, the definition 3.5.6]
3.5.6
Normal conditions normalcondition
All protective measures to prevent dangerous conditions are intact.
[GB 4793.1-2007, the definition 3.5.10]
3.5.7
Single fault condition singlefaultcondition
Protective measures to prevent the risk of a failure condition occurs or is likely to cause some dangerous and a fault condition.
Note. If a single fault condition will inevitably lead to another single fault conditions, such a two failures are considered a single fault
condition.
[GB 4793.1-2007, the definition 3.5.11]
3.5.8
Operator operator
According to the intended use of the device to operate the equipment man.
Note. the operator for this purpose should be properly trained.
[GB 4793.1-2007, the definition 3.5.12]
3.5.9
Transient overvoltage transientovervoltage
Transient overvoltage is a few milliseconds or less short time overvoltage, oscillation or oscillations, usually high damping.
3.5.10
Battery battery
Rechargeable or non-rechargeable an electrochemical energy.
[GB/T 15969.2-2008, the definition 3.5]
3.5.11
To earth
Conductive substance of the Earth, its potential in any point conventionally are considered zero.
[GB/T 15969.2-2008, the definition 3.16]
3.5.12
EUT equipmentundertest; EUT
Specified by the manufacturer for a representative type test equipment.
[GB/T 15969.2-2008, the definition 3.20]
3.5.13
Normal use normaluse
Operation according to instructions or intended use by the apparent instructions, including standby.
[GB 4793.1-2007, the definition 3.5.9]
3.5.14
Unit unit
Unit is a complete assembly (the assembly is inserted in the connection module or composition), with respect to the unit permanently installed
Cable connection to other units within the system, a portable unit for connection to other units within the system by cable or other means.
[GB/T 15969.2-2008, the definition 3.63]
3.5.15
High integrity highintegrity
Less prone to be dangerous danger of failure; the high integrity of the member is considered to be less prone to failure during the test under conditions
Failed.
[GB 4793.1-2007, the definition 3.5.4]
3.6 Insulation
3.6.1
Basic insulation basicinsulation
Insulation HAZARDOUS LIVE parts which provides basic protection.
[GB 4793.1-2007, the definition 3.6.1]
3.6.2
Additional insulation supplementaryinsulation
In addition to basic insulation independent insulation outside also uses for fault protection.
[GB 4793.1-2007, the definition 3.6.2]
3.6.3
Double insulation doubleinsulation
Constituted by the basic insulation and supplementary insulation.
[GB 4793.1-2007, the definition 3.6.3]
3.6.4
Reinforced insulation reinforcedinsulation
Insulation dangerous live parts, which provides insulation equivalent to double the level of protection against electric shock.
NOTE. Reinforced insulation may comprise several layers, these layers can not be alone as a basic or supplementary insulation testing.
[GB 4793.1-2007, the definition 3.6.4]
3.6.5
Pollution degree (in the micro-environment) polutiondegree (inthemicro-environment)
To determine the clearances and creepage distances, the pollution degree microenvironment as the following three grades.
Note 1. The build-up of foreign matter and moisture can cause conductive insulator contamination.
Note 2. The minimum clearances for pollution degree Pollution Degree 2 and 3 are given based on experience rather than raw data.
[GB 4793.1-2007, the definition 3.6.6]
3.6.5.1
Pollution Level 1 polutiondegree1
No pollution or only dry non-conductive pollution, the pollution has no adverse effect.
[GB 4793.1-2007, the definition 3.6.6.1]
3.6.5.2
Pollution Level 2 polutiondegree2
Normally only non-conductive pollution, but occasionally due to condensation and short conductive.
[GB 4793.1-2007, the definition 3.6.6.2]
3.6.5.3
Pollution Level 3 polutiondegree3
Conductive pollution or dry non-conductive pollution which becomes conductive due to condensation.
Note. In this condition, the device is usually to prevent exposure to direct sunlight, rain, strong wind pressure, but it need not control the temperature or humidity.
[GB 4793.1-2007, the definition 3.6.6.3]
3.6.6
Clearance clearance
Space the shortest distance between two conductive parts.
[GB 4793.1-2007, the definition 3.6.7]
3.6.7
Creepage distance creepagedistance
Along the shortest distance between two conductive insulating solid surface material parts.
[GB 4793.1-2007, the definition 3.6.8]
3.6.8
Microenvironment micro-environment
In the study of environmental conditions or climbing clearance distances around.
Environmental clearances or creepage distances microenvironment determines the insulating effect, rather than the device determines the insulating effect. Microenvironment than
Environmental equipment may be better, it could be worse. It includes all of the factors affecting the insulation, e.g., weather, electromagnetic, pollution. see
IEC 60664.
[GB/T 15969.2-2008, the definition 3.38]
4 Test
4.1 Overview
In this section all tests are type tests on the sample devices or components carried out. The only purpose of these tests is to check
Whether the experimental design and construction to ensure compliance. In addition, the manufacturer shall produced at the same time dangerous live parts and
ACCESSIBLE conductive parts of the device to 100% of routine tests in Appendix F of GB 4793.1-2007.
Satisfy the provisions of this part of the relevant standards and requirements for use by these sub-assembly of the apparatus, the entire apparatus of the type test
Inter do not have to repeat the test.
It should be checked by all applicable test meets the requirements of this section, but if the inspection of the equipment can really prove will pass
A trial, then this test may be omitted. Test under the following conditions.
--- Reference test conditions (see 4.3);
--- Fault conditions (see 4.4).
NOTE. If performing compliance test, or a measured value of the applied (such as voltage) of the actual value due to errors and uncertainty, then.
--- Manufacturer to ensure that the value of the test is applied to at least a predetermined value;
--- Test departments should ensure that the test applied is not greater than the value specified.
4.2 Test procedure
Subject to the provisions of this section, the test sequence may be optionally substituted. After each test should be carefully checked for the EUT. If you
Test results in doubt, doubt if the test reverse the order of the trial whether any of the preceding pass true, the front of these tests should
When repeated. If the test could damage the device under a single fault condition, these tests can be placed under the test conditions of the reference test
after that.
4.3 reference test conditions
4.3.1 Environmental Conditions
Subject to the provisions of this section, the test sites should have the following conditions.
a) Temperature. 15 ℃ ~ 35 ℃;
b) Relative humidity. not exceed 75%;
c) Atmospheric pressure. 86kPa ~ 106kPa;
d) no frost, condensation, water seepage, rain and sunshine.
4.3.2 Device Status
Unless otherwise specified, each test should be assembled on the device for normal use, and in the provisions of 4.3.2.1 ~ 4.3.2.9 least
Benefit under a combination of conditions.
It should provide instructions provided by the manufacturer to install.
4.3.2.1 Device Location
Equipment is in any position of normal use, and any ventilation unobstructed.
4.3.2.2 Accessories
Recommended by the manufacturer or supplied, accessories and operating personnel and equipment for use with interchangeable parts should be connected or not.
4.3.2.3 lid and removable parts
Without tools or removal of the lid parts should be removed or not removed.
4.3.2.4 MAINS
Shall comply with the following requirements.
a) the supply voltage should be between 90% to 110% of the device can be set to any of the rated voltage, or if the device provides for
Accommodate larger voltage fluctuations, the supply voltage should be any voltage fluctuations within the range of reach;
b) frequency should any nominal frequency;
c) AC, DC equipment shall be connected to an AC or DC power;
d) the use of DC or single-phase power equipment shall be separately normal polarity and an opposite polarity;
e) In addition to the equipment prescribed only for ungrounded power grid, the reference test of a power pole should be at or near ground potential
Ground potential;
f) for battery-powered devices, if connected devices allow reverse, it sh......
Tips & Frequently Asked Questions:
Question 1: How long will the true-PDF of GB 30439.1-2013_English be delivered?
Answer: Upon your order, we will start to translate GB 30439.1-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.
Question 2: Can I share the purchased PDF of GB 30439.1-2013_English with my colleagues?
Answer: Yes. The purchased PDF of GB 30439.1-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.
Question 3: Does the price include tax/VAT?
Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs):
List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?
Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
