GB 10395.6: Historical versions
| Standard ID | USD | BUY PDF | Lead-Days | Standard Title (Description) | Status |
| GB 10395.6-2025 | RFQ |
ASK
|
3 days
|
Agricultural machinery - Safety - Part 6: Equipment for crop protection
| |
| GB 10395.6-2006 | 90 |
Add to Cart
|
Auto, < 3 mins
|
Tractors and machinery for agriculture and forestry -- Technical means for ensuring safety -- Part 6: Equipment for crop protection
| Valid |
| GB 10395.6-1999 | 319 |
Add to Cart
|
3 days
|
Tractors and machinery for agriculture and forestry--Technical means for ensuring safety--Part 6: Equipment for crop protection
| Obsolete |
Basic data
Standard ID: GB 10395.6-2025 (GB10395.6-2025)
Description (Translated English): Agricultural machinery - Safety - Part 6: Equipment for crop protection
Sector / Industry: National Standard
Classification of Chinese Standard: B91
Classification of International Standard: 65.060.40
Date of Issue: 2025-10-31
Date of Implementation: 2026-11-01
Older Standard (superseded by this standard): GB 10395.6-2006
GB 10395.6-2025: Agricultural machinery - Safety - Part 6: Equipment for crop protection
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 65.060.40
CCSB91
National Standards of the People's Republic of China
Replaces GB 10395.6-2006
Agricultural Machinery Safety Part 6.Plant Protection Machinery
Published on 2025-10-31
Implemented on 2026-11-01
State Administration for Market Regulation
The State Administration for Standardization issued a statement.
Table of contents
Preface III
Introduction V
1.Scope 1
2 Normative References 1
3.Terms and Definitions 2
4.Safety Requirements and Protective Measures 2
4.1 General Requirements 2
4.2 Special requirements for backpack-type plant protection machinery 6
4.3 Special requirements for boom sprayers 6
4.4 Special requirements for self-propelled, suspended, semi-suspended, towed, and vehicle-mounted plant protection machinery 7
4.5 Special Requirements for Thermal Fog Machines 9
4.6 Special Requirements for Remote-Controlled and Unmanned Agricultural Machinery 9
5.Verification of safety requirements and/or protective measures 9.
5.1 General Requirements 9
5.2 Confirmation of safety requirements and/or protective measures 10
6 Safety signs 14
7.Instruction Manual 14
Appendix A (Informative) List of Major Hazards, Hazardous Conditions, and Hazardous Events 16
Reference 23
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents".
Drafting.
This document is Part 6 of GB/T (GB) 10395 "Safety of Agricultural and Forestry Machinery (Safety Technical Requirements)". GB/T (GB) 10395 has been...
The following sections have been published.
---GB 10395.1 Safety of Agricultural and Forestry Machinery Part 1.General Provisions;
---GB 10395.2 Safety of Agricultural and Forestry Machinery Part 2.Dump Trailers;
---GB/T 10395.3 Agricultural Machinery Safety Part 3.Solid Fertilizer Spreaders;
---GB/T 10395.5 Agricultural Machinery Safety - Part 5.Driven Tillage Machinery;
---GB 10395.6 Agricultural Machinery Safety Part 6.Plant Protection Machinery;
---GB 10395.7 Agricultural Machinery Safety Part 7.Combine Harvesters, Forage Harvesters, Cotton Harvesters and Sugarcane Harvesters
Seize the opportunity;
---GB 10395.8 Safety Technical Requirements for Agricultural and Forestry Tractors and Machinery Part 8.Irrigation and Drainage Pumps and Pump Units;
---GB/T 10395.9 Safety of agricultural and forestry machinery - Part 9.Seeding machinery;
---GB 10395.10 Safety Technical Requirements for Agricultural and Forestry Tractors and Machinery Part 10.Hand-held Mini Tillers;
---GB 10395.12 Safety Technical Requirements for Agricultural and Forestry Tractors and Machinery Part 12.Portable Powered Hedge Trimmers;
---GB 10395.14 Safety Technical Requirements for Agricultural and Forestry Tractors and Machinery Part 14.Power Crusher and Chopper;
---GB 10395.15 Safety Technical Requirements for Agricultural and Forestry Tractors and Machinery Part 15.Power Repair Tractors Equipped with Rigid Cutting Devices
Edge machine;
---GB 10395.16 Safety of Agricultural and Forestry Machinery Part 16.Potato Harvesters;
---GB 10395.17 Safety of Agricultural and Forestry Machinery Part 17.Sugar Beet Harvesters;
---GB 10395.18 Safety of Agricultural and Forestry Machinery Part 18.Hose-Driven Winch Sprinkler Irrigation Machines;
---GB 10395.19 Safety of Agricultural and Forestry Machinery Part 19.Center-pivot type and translational type sprinkler irrigation machines;
---GB/T 10395.20 Safety of Agricultural and Forestry Machinery Part 20.Pick-up Balers;
---GB/T 10395.21 Safety of Agricultural and Forestry Machinery Part 21.Rotary Spreaders and Rakes;
---GB/T 10395.22 Safety of Agricultural and Forestry Machinery - Part 22.Front Loading Devices;
---GB 10395.23 Safety of Agricultural and Forestry Machinery Part 23.Unloading Machine for Fixed Circular Silage Piles;
---GB 10395.24 Safety of Agricultural and Forestry Machinery Part 24.Liquid Fertilizer Applicators;
---GB/T 10395.25 Safety of Agricultural and Forestry Machinery Part 25.Rotary Disc Mowers, Drum Mowers and Spinner Mowers
Lawn mower;
---GB/T 10395.26 Safety of Agricultural and Forestry Machinery Part 26.Large Rotary Lawn Mowers;
---GB/T 10395.27 Safety of Agricultural and Forestry Machinery Part 27.Wrapping Machines;
---GB/T 10395.28 Agricultural machinery safety - Part 28.Mobile grain screw conveyors.
This document supersedes GB 10395.6-2006 "Safety Technical Requirements for Agricultural and Forestry Tractors and Machinery Part 6.Plant Protection Machinery".
Compared with GB 10395.6-2006, apart from structural adjustments and editorial changes, the main technical changes are as follows.
a) The scope of application has been changed (see Chapter 1, Chapter 1 of the.2006 edition);
b) Terms and definitions have been changed (see Chapter 3, Chapter 3 of the.2006 edition);
c) The "Technical Requirements" section has been changed to "Safety Requirements and Protective Measures," which refines the general requirements and the safety requirements for different aircraft models (see section 4).
Chapter 4 (2006 edition);
d) The general requirements have been changed (see 4.1, Chapter 4 of the.2006 edition);
e) The requirements for the control mechanism have been changed (see 4.1.3, 4.8 in the.2006 edition);
f) The requirements for medicine boxes have been changed (see 4.1.4, 4.2 in the.2006 edition);
g) Increased requirements for fuel tanks (see 4.1.5);
h) The requirements for the fan have been changed (see 4.1.6, 4.5.2 of the.2006 version);
i) The requirement for manual spraying devices has been removed (see 4.5.3 in the.2006 edition);
j) The requirement for hose fittings has been removed (see 4.7 in the.2006 edition);
k) Added requirements for hydraulic systems, other requirements for electrical systems, and requirements for chargers (see 4.1.8, 4.1.9, 4.1.10);
l) Special requirements for backpack-mounted plant protection machinery have been added (see 4.2);
m) The specific requirements for boom sprayers have been changed (see 4.3, 4.5 in the.2006 edition);
n) Special requirements have been added for self-propelled, suspended, semi-suspended, towed, and vehicle-mounted plant protection machinery (see 4.4);
o) Special requirements for thermal fogging machines have been added (see 4.5);
p) Special requirements have been added for remotely controlled and unmanned agricultural machinery (see 4.6);
q) Verification of safety requirements and/or protective measures has been added (see Chapter 5);
r) The available accessories have been removed (see Chapter 5 of the.2006 edition);
s) The requirements for safety signs have been changed (see Chapter 6, 4.5.1, 4.5.2 and Chapter 6 of the.2006 edition);
t) The requirements for the instruction manual have been changed (see Chapter 7, 4.5.1, 4.5.2 and Chapter 7 of the.2006 edition).
Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents.
This document was proposed and is under the jurisdiction of the Ministry of Industry and Information Technology of the People's Republic of China.
This document was first published in.1999, revised for the first time in.2006, and this is the second revision.
Introduction
GB/T (GB)10395 "Safety of Agricultural and Forestry Machinery (Safety Technical Requirements)" aims to ensure safety and prevent products from causing damage during use.
The regulations stipulate unacceptable harm and specify safety requirements for various agricultural and forestry machinery products.
There are many types and forms of agricultural and forestry machinery. While there are common safety requirements, each type has its own unique characteristics. Therefore, it is necessary to regulate the safety requirements for different types of agricultural and forestry machinery.
The requirement is to divide agricultural and forestry machinery safety into multiple parts, and to specify the corresponding safety requirements or protective measures in each part. These parts together...
GB/T (GB) 10395 proposes to consist of the following parts to constitute a complete set of safety requirements or protective measures for agricultural and forestry machinery.
---Part 1.General Provisions. The purpose is to provide general safety requirements and compliance assessment methods for agricultural and forestry machinery.
---Part 2.Dump Trailers. The purpose is to provide safety requirements and compliance assessment methods for dump trailers.
---Part 3.Solid Fertilizer Spreaders. The purpose is to provide safety requirements and compliance assessment methods for solid fertilizer spreaders.
---Part 5.Driven Tillers. The purpose is to provide safety requirements and compliance assessment methods for driven tillage machinery.
---Part 6.Plant Protection Machinery. The purpose is to provide safety requirements and compliance assessment methods for plant protection machinery.
---Part 7.Combine Harvesters, Forage Harvesters, Cotton Harvesters, and Sugarcane Harvesters. The purpose is to provide information on combine harvesters, forage harvesters, cotton harvesters, and sugarcane harvesters.
Safety requirements for harvesters of feed, cotton, and sugarcane.
---Part 8.Irrigation and Drainage Pumps and Pump Units, which aims to provide safety requirements for irrigation and drainage pumps and pump units.
---Part 9.Seeding Machinery. The purpose is to provide safety requirements and compliance assessment methods for seeding machinery.
---Part 10.Hand-held Mini Tillers. The purpose is to provide safety requirements and compliance assessment methods for hand-held mini tillers.
---Part 12.Portable Powered Hedge Trimmers. The purpose is to provide safety requirements and compliance guidelines for portable powered hedge trimmers.
Sex determination method.
---Part 14.Powered Crusher and Shredder. The purpose is to provide safety requirements and compliance criteria for powered crushers and shredders.
Determine the method.
---Part 15.Powered trimming machine with rigid cutting device. The purpose is to provide safety specifications for powered trimming machines equipped with rigid cutting devices.
Full requirements and compliance assessment methods.
---Part 16.Potato Harvesters. The purpose is to provide safety requirements and compliance assessment methods for potato harvesters.
---Part 17.Beet Harvesters. The purpose is to provide safety requirements and compliance assessment methods for beet harvesters.
---Part 18.Hose-Driven Winch Sprinklers. The purpose is to provide the safety requirements and compliance guidelines for hose-driven winch sprinkler systems.
Sex determination method.
---Part 19.Center-pivot and translational sprinkler systems. The purpose is to provide safety requirements for center-pivot and translational sprinkler systems.
Methods for determining the compliance of summation.
---Part 20.Pick-up and Baler. The purpose is to provide safety requirements and compliance assessment methods for pick-up and baler.
---Part 21.Rotary Wares and Rakes. The purpose is to provide safety requirements and compliance guidelines for rotary warders and rakes.
Sex determination method.
---Part 22.Front Loading Device. The purpose is to provide safety requirements and compliance assessment methods for front loading devices.
---Part 23.Stationary Circular Silage Pit Unloading Machine. The purpose is to provide safety requirements for stationary circular silage pit unloading machines.
---Part 24.Liquid Fertilizer Applicator. The purpose is to provide safety requirements and compliance assessment methods for liquid fertilizer applicators.
---Part 25.Rotary Disc Mowers, Drum Mowers, and Spinner Mowers. The purpose is to provide information on rotary disc mowers...
Safety requirements and compliance assessment methods for lawn mowers, drum mowers and swivel mowers.
---Part 26.Large Rotary Lawn Mowers. The purpose is to provide safety requirements and compliance assessments for large rotary lawn mowers.
method.
---Part 27.Wrapping Machines. The purpose is to provide safety requirements and compliance assessment methods for wrapping machines.
---Part 28.Mobile Grain Screw Conveyors. The purpose is to provide the safety requirements and compliance guidelines for mobile grain screw conveyors.
Sex determination method.
The structure of safety standards in the mechanical field is as follows.
a) Category A standards (basic safety standards) provide basic concepts, design principles, and general characteristics applicable to all machinery.
b) Category B standards (general safety standards) relate to a safety feature of machinery or a type of safety device with a wide range of applications.
1) Category B1, specific safety characteristic standards (such as safety distance, surface temperature, and noise);
2) Class B2, safety device (such as two-hand control device, interlocking device, pressure-sensitive device, protective device) standard.
c) Class C standards (machine safety standards) are standards that specify detailed safety requirements for a particular machine or a group of machines.
This document belongs to Category C standards as specified in GB/T 15706-2012.
This document outlines plant protection machinery used for applying pesticides and spraying liquid fertilizers (excluding manned and unmanned aerial vehicles).
Major hazards, dangerous conditions, and dangerous events involved in the pharmaceutical system.
GB 10395.1 "Safety of Agricultural and Forestry Machinery Part 1.General Rules" specifies the requirements for agricultural machinery (self-propelled, suspended, semi-suspended, and towed).
(This is a major danger that is prevalent in the form of)
If the provisions of this Class C standard differ from those of Class A or Class B standards, for machines designed and manufactured in accordance with the provisions of this Class C standard...
For devices, the provisions of this Class C standard take precedence over Class A or Class B standards.
Agricultural Machinery Safety Part 6.Plant Protection Machinery
1 Scope
This document, together with GB 10395.1, specifies the design and manufacture of plant protection machinery used for applying pesticides and spraying liquid fertilizers.
This document outlines the relevant safety requirements and verification methods. It also specifies the information that manufacturers should provide regarding safe operating procedures (including residual risks).
Information type.
When the provisions of this document are inconsistent with those of GB 10395.1, for machines designed and manufactured in accordance with the provisions of this document, the provisions of this document shall prevail.
The provisions of GB 10395.1 shall take precedence.
This document, together with GB 10395.1, sets out the major hazards, hazardous conditions, and [other hazards] that may occur when the vehicle is used as intended under the manufacturer's predetermined conditions.
Dangerous events (see Appendix A), except for those caused by the following.
---Environmental factors other than noise;
---Moving components that transmit power beyond the strength requirements of protective devices and barriers.
This document applies to manual and motorized plant protection machinery used for applying pesticides and spraying liquid fertilizers (hereinafter collectively referred to as "pesticides").
Fogging machines, dusters, fogging machines, liquid fertilizer sprayers, etc., hereinafter referred to as "plant protection machinery" or "machines," but not applicable to manned vehicles and...
Unmanned aerial spraying system.
This document does not apply to agricultural machinery manufactured before the implementation date.
2 Normative references
The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.
For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies.
This document.
GB/T 3766 General rules and safety requirements for hydraulic transmission systems and their components
GB/T 4706.18 Safety of household and similar electrical appliances - Part 18.Particular requirements for battery chargers
GB/T 5330-2003 Industrial Woven Square Hole Wire Mesh Screen
GB 9656 Technical Specification for Safety of Motor Vehicle Glass
GB 10395.1 Safety of Agricultural Machinery Part 1.General Provisions
GB 10396 General Rules for Safety Signs and Hazard Symbols for Agricultural and Forestry Tractors and Machinery, Lawn and Horticultural Power Machinery
GB/T 15706-2012 General Principles for Safety Design of Machinery. Risk Assessment and Risk Reduction
GB/T 18678-2002 Plant Protection Machinery - Agricultural Sprayers (Machines) - Rated Capacity of Powder Tank and Diameter of Filling Hole
GB/T 20085 Glossary of Plant Protection Machinery
GB/T 20947-2007 High-precision hoist chains for short link chains, grade T (T, DAT and DT types)
GB/T 23821 Safety of Machinery - Safe Distances to Prevent Upper and Lower Limbs from Touching Dangerous Areas
GB/T 24679.2-2020 Plant Protection Machinery - Backpack Sprayers - Part 2.Safety and Environmental Requirements
GB 26133 Emission Limits and Measurement Methods for Exhaust Pollutants from Small Spark-Ignition Engines for Non-Road Mobile Machinery (China First and Second Standards)
stage)
GB/T 30464 Installation Specifications for Lighting, Light Signals and Marking Devices for Agricultural and Forestry Tractors and Machinery on Roads
HJ1014 Technical Requirements for Pollutant Emission Control of Non-Road Diesel Mobile Machinery
JB/T 6701-2018 Tractor Headlights
......
Tips & Frequently Asked Questions:
Question 1: How long will the true-PDF of GB 10395.6-2025_English be delivered?
Answer: Upon your order, we will start to translate GB 10395.6-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.
Question 2: Can I share the purchased PDF of GB 10395.6-2025_English with my colleagues?
Answer: Yes. The purchased PDF of GB 10395.6-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.
Question 3: Does the price include tax/VAT?
Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs):
List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?
Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
Question 5: Should I purchase the latest version GB 10395.6-2025?
Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 10395.6-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
