FZ/T 94062-2012 English PDF

US$179.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 94062-2012: Jacquard machines
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
FZ/T 94062-2012	179	Add to Cart	3 days	Jacquard machines	Valid

Similar standards

FZ/T 93048.1   FZ/T 93019   FZ/T 94067   FZ/T 94066   FZ/T 94064.1   

Basic data

Standard ID: FZ/T 94062-2012 (FZ/T94062-2012)
Description (Translated English): Jacquard machines
Sector / Industry: Spinning & Textile Industry Standard (Recommended)
Classification of Chinese Standard: W94
Classification of International Standard: 59.120.30
Word Count Estimation: 7,778
Quoted Standard: GB/T 191; GB/T 7111.1; GB/T 7111.6; FZ/T 90001; FZ/T 90074; FZ/T 90089.1; FZ/T 90089.2
Regulation (derived from): Ministry of Industry and Information Technology Bulletin 2012 No. 70; industry standard filing Notice 2013 No. 2 (No. 158 overall)
Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China
Summary: This standard specifies the jacquard Types and basic parameters, requirements, test methods, inspection rules and signs, packaging, transport and storage. This standard applies to supporting the use of the loom weaving trademark, ties, towels, blankets, u

FZ/T 94062-2012: Jacquard machines

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Jacquard machines ICS 59.120.30 W94 People's Republic of China textile industry standards Jacquard Issued on. 2012-12-28 2013-06-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China Textile Industry Association. This standard by the National Standardization Technical Committee Textile machinery and accessories. This standard was drafted. Yangshan Zhejiang Textile Machinery Co., Ltd., Zhejiang Quality Inspection Institute of Science, Shaoxing County Rainbow Thai Machinery Manufacturing Ltd., Shanghai Textile Machinery Co. sword, Zhejiang Qi Fang Machinery Co., Ltd. Shaoxing County, the Machinery Group, China Textile Machinery Mechanical Equipment Industry Association. The main drafters of this standard. Shuzhuan Kui, Xu Haiping, Ms. Li, Dong Hanmin, Han Tong, Weide Tai, Dong Yunhai, Shiying Can. Jacquard

1 Scope

This standard specifies the types and basic parameters of jacquard, requirements, test methods, inspection rules and signs, packaging, transportation and storage. This standard applies to the weaving loom supporting the use of trademarks, ties, towels, blankets, upholstery fabric and a variety of mechanical jacquard.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 191 Packaging - Pictorial signs GB/T 7111.1 Textile machinery - Noise test code - Part 1. General requirements GB/T 7111.6 Textile machinery - Noise test code - Part 6. Weaving Machinery FZ/T 90001 Textile machinery Packaging FZ/T 90074 textile machinery products Painting FZ/T 90089.1 textile machinery nameplate types, sizes and technical requirements FZ/T 90089.2 textile machinery nameplate content

3 Types and basic parameters

Types and basic parameters in Table 1. Table 1 Project Types and basic parameters Operation type style or left hand style Opening type full open, half open, the opening or openings Fully elastic back type back fully, fully back the hammer Power input vertical shaft, chain drive Flower input mode textured paper, electronic needle selection Adjust the opening stroke conversion pendulum holes or link positions Fountains positive quadrilateral, pentagon, hexagon, a regular octagon Highest opening times/(times/min) 180 Opening height/mm 70 ~ 120 Paperclip number/pin 96 to 2960 Single needle load/kg ≤0.5 Machine load/kg 325 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of FZ/T 94062-2012_English be delivered?

Answer: Upon your order, we will start to translate FZ/T 94062-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of FZ/T 94062-2012_English with my colleagues?

Answer: Yes. The purchased PDF of FZ/T 94062-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.