FZ/T 93010-2002 English PDFUS$269.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. FZ/T 93010-2002: Weft pirns for switchable shuttles Status: Valid FZ/T 93010: Historical versions
Basic dataStandard ID: FZ/T 93010-2002 (FZ/T93010-2002)Description (Translated English): Weft pirns for switchable shuttles Sector / Industry: Spinning & Textile Industry Standard (Recommended) Classification of Chinese Standard: W93 Classification of International Standard: 59.120.10 Word Count Estimation: 10,133 Date of Issue: 2002-09-28 Date of Implementation: 2003-01-01 Older Standard (superseded by this standard): FZ/T 93010-1991 Issuing agency(ies): National Economic and Trade Commission of the People Republic of China Summary: This standard specifies for shuttle shuttle plastic pirn (hereinafter referred to as " pirn ") terminology, classification and marking, requirements, test methods, inspection rules and signs, packaging. This standard is applicable for winding yarn with shuttle shuttle weft supporting the use of plastic pipe. FZ/T 93010-2002: Weft pirns for switchable shuttles---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Weft pirns for switchable shuttles ICS 59.120.10 W93 Record number. 11040-2002 People's Republic of China Textile Industry Standard Replace FZ/T 93010-1991 Plastic weft tube for shuttle shuttle Released on.2002-09-28 2003-01-01 implementation The National Economic and Trade Commission of the People's Republic of China ForewordThis standard replaces FZ/T 93010-1991 "Plastic Weft Tube for Shuttle Shuttle". The main changes in this standard compared with FZ/T 93010-1991 are as follows. --- In accordance with the requirements of GB/T 1.1-2000 "Standardization Work Guide Part 1. Standard Structure and Writing Rules" The format has been modified; --- The depth of the plastic weft tube positioning groove is increased to 4mm (4.3.1 ~ 4.3.3 of the.1991 edition; 5.1.1 ~ 5.1.3 of this edition); --- No longer classify the plastic vibration of the A-type plastic weft tube into superior products, first-class products and qualified products; reduce the vibration range of the A-type plastic weft tube Value (9.5.5.3 of the.1991 edition; 5.4 of this edition); This standard was proposed by the China Textile Industry Association. This standard is under the jurisdiction of Shaanxi Textile Equipment Research Institute. This standard was drafted by Shaanxi Textile Equipment Research Institute and Zhejiang Sanyou Group Co., Ltd. participated in the drafting. The main drafters of this standard. Wang Yuhua, Jiang Chuanliang, Zhang Xiaoyu, Zhao Yusheng. The previous versions of the standards replaced by this standard are. ---FZ/T 93010-1991. Plastic weft tube for shuttle shuttle1 ScopeThis standard specifies the terminology, classification and marking, requirements, test methods, and the method, classification and marking of plastic weft tubes for shuttle shuttles (hereinafter referred to as "weft tubes"). Inspection rules and signs, packaging. This standard applies to plastic weft tubes that are used to wind the yarn and are used with the shuttle shuttle.2 Normative referencesThe terms in the following documents become the terms of this standard by reference to this standard. All dated references, followed by all Modifications (not including errata content) or revisions do not apply to this standard, however, parties to agreements based on this standard are encouraged to study Is it possible to use the latest version of these files? For undated references, the latest edition applies to this standard. FZ/T 90003.1-1991 Test method for plastic warp and weft tubes - Static bending FZ/T 90003.2-1991 Plastic warp and weft tube test method FZ/T 90003.3-1991 Plastic warp and weft tube test method FZ/T 90004-2002 Warp and weft tube inspection rules FZ/T 90005-1991 Warp and weft tube signs, packaging FZ/T 94002-1991 shuttle type wooden shuttle3 termsThe following terms apply to this standard (see Figure 1). Figure 1 Weft tube terminology 3.1 Pipe length 3.2 core bottom distance 3.3 pipe body 3.3.1 Upper part 3.3.2 Central 3.3.3 Lower part 3.4 trunking 3.5 core hole ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 93010-2002_English be delivered?Answer: Upon your order, we will start to translate FZ/T 93010-2002_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of FZ/T 93010-2002_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 93010-2002_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version FZ/T 93010-2002?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 93010-2002 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
