FZ/T 93008-2018 English PDF

US$419.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 93008-2018: Plastic warp tubes
Status: Valid

FZ/T 93008: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
FZ/T 93008-2018	419	Add to Cart	4 days	Plastic warp tubes	Valid
FZ/T 93008-2002	319	Add to Cart	3 days	Plastic tubes on ring spinning frames	Obsolete
FZ/T 93008-1991	199	Add to Cart	2 days	Plastic Warp Tubes for Cotton Spinning	Obsolete

Similar standards

FZ/T 93048.1   FZ/T 93019   FZ/T 93002   FZ/T 93015   FZ/T 93001   

Basic data

Standard ID: FZ/T 93008-2018 (FZ/T93008-2018)
Description (Translated English): Plastic warp tubes
Sector / Industry: Spinning & Textile Industry Standard (Recommended)
Classification of Chinese Standard: W93
Classification of International Standard: 59.120.10
Word Count Estimation: 18,155
Date of Issue: 2018-10-22
Date of Implementation: 2019-04-01
Older Standard (superseded by this standard): FZ/T 93008-2002; FZ/T 93009-1991; FZ/T 93055-1999
Regulation (derived from): Ministry of Industry and Information Technology Announcement No. 54 of 2018
Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China
Summary: This standard specifies the terms, classification and marking, requirements, test methods, inspection rules and packaging, marking, transportation and storage of plastic warp bobbins for ring spinning, and twisting spindles. This standard applies to cotton, combed wool, �� / linen spinning ring spinning machine, yarn feeder and twisting machine spindle warp tube.

FZ/T 93008-2018: Plastic warp tubes

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Plastic tower packing drop hammer impact strength test method) ICS 59.120.10 W93 People's Republic of China Textile Industry Standard Replace FZ/T 93008-2002, FZ/T 93009-1991, FZ/T 93055-1999 Plastic warp bobbin Published on.2018-10-22 Implementation of.2019-04-01 Ministry of Industry and Information Technology of the People's Republic of China

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces FZ/T 93008-2002 "plastic warp tube for ring spinning machine", FZ/T 93009-1991 "warn tube for wool spinning" And FZ/T 93055-1999 "Round-spinning, twisting and twisting of bobbins with spindles 1.38 and 1.64". Compared with the above three standards, The main technical changes outside the series are as follows. --- Modified the standard name; --- Increased the normative technical elements of transportation and storage (see Chapter 1); --- Revised the list of normative references; --- The term adds "pipe top, no roll head, flat roll head, tube bottom" and corresponding English (see Chapter 3); --- Reclassify the product and modify the product marking method (see Chapter 4); --- Revised the relevant inspection items (see Chapter 7); ---Modified the contents of "Packaging, Marking, Transportation and Storage" (see Chapter 8). This standard was proposed by the China National Textile and Apparel Council. This standard is determined by the National Textile Machinery and Accessories Standardization Technical Committee Textile Equipment Subcommittee (SAC/TC215/SC2) Return to the mouth. This standard was drafted. Zhejiang Sanyou Plastic Industry Co., Ltd., Shaanxi Textile Equipment Research Institute, Jiaozuo Plastic Textile Equipment Factory, National Textile Mechanical Product Quality Supervision and Inspection Center (Shanxi). The main drafters of this standard. Hou Shuili, Dai Yunqing, Zhang Limin, Zhou Lian, Zhou Guangqi, Bai Yongqiang, Guan Xin, Zhao Yusheng. The previous versions of FZ/T 93008-2002 were released as follows. ---FJ1019-1978, GB n120-1981, FZ/T 93008-1991. The previous versions of FZ/T 93009-1991 were released as follows. ---FJ1114-1981. Plastic warp bobbin

1 Scope

This standard specifies the terms, classification and marking, requirements, and requirements for plastic warp bobbins (hereinafter referred to as "warp bobbins") for ring spinning, and twisting spindles. Test methods, inspection rules and packaging, marking, transportation and storage. This standard applies to cotton, combed wool, 苎/linen spinning ring spinning machine, yarn machine and twisting machine spindle warp tube.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 191 packaging storage and transportation icon GB/T 2828.1. Sampling procedures for sampling by sampling - Part 1 . Batch-to-batch sampling plan, searched by AQL GB/T 2829 Cycle Inspection Counting Sampling Procedures and Tables (Applicable to Inspection of Process Stability) GB/T 24371-2009 Spinning preparation, spinning and twisting (捻) mechanical ring spinning, twisting and twisting of bobbin spindles 1.38 and 1.64 FZ/T 90003.1 Plastic warp and weft tube test method FZ/T 90003.2 Plastic warp and weft tube test method FZ/T 90003.3 Plastic warp and weft tube test method

3 terms

The following terms and definitions (shown in Figure 1) apply to this document. a) Conical hole without conical cone conical tube Figure 1 warp tube terminology ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of FZ/T 93008-2018_English be delivered?

Answer: Upon your order, we will start to translate FZ/T 93008-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of FZ/T 93008-2018_English with my colleagues?

Answer: Yes. The purchased PDF of FZ/T 93008-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version FZ/T 93008-2018?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 93008-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.