FZ/T 75004-2014 English PDFUS$189.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. FZ/T 75004-2014: Coated fabrics. Determination of elongation and tensile permanent deformation Status: Valid FZ/T 75004: Historical versions
Basic dataStandard ID: FZ/T 75004-2014 (FZ/T75004-2014)Description (Translated English): Coated fabrics. Determination of elongation and tensile permanent deformation Sector / Industry: Spinning & Textile Industry Standard (Recommended) Classification of Chinese Standard: W04 Classification of International Standard: 59.080.40 Word Count Estimation: 8,817 Date of Issue: 10/14/2014 Date of Implementation: 4/1/2015 Older Standard (superseded by this standard): FZ/T 75004-1993 Quoted Standard: GB/T 3291.3; GB/T 6529 Regulation (derived from): People's Republic of China Ministry of Industry and Information Technology Notice 2014 No. 63; Industry Standard Filing Notice 2014 No. 12 (Overall No. 180) Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China Summary: This Standard specifies the determination coated fabric tensile elongation, tensile delay distortion and permanent deformation tensile test method with fixed or constant load secondary long way. This Standard applies to all kinds of coated fabrics. FZ/T 75004-2014: Coated fabrics. Determination of elongation and tensile permanent deformation---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Coated fabrics.Determination of elongation and tensile permanent deformation ICS 59.080.40 W04 People's Republic of China textile industry standards Replacing FZ/T 75004-1993 Elongation and permanent deformation Tensile Test Method for Coated Fabrics Issued on. 2014-10-14 2015-04-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. Instead of the standard FZ/T 75004-1993 "coated fabric elongation and permanent deformation test method for tensile." This standard FZ/T 75004-1993 compared to the main technical content changes are as follows. --- Normative references added GB/T 6529, deleted the GB/T 8170; --- Modify the term "tensile set" is defined, an increase of "tensile set rate" "stretch delay distortion" "stretch delay distortion Rate "three terms; --- Increased 5.1 Note; Stretch and return when --- speed tests conducted by 5mm/min to a lower speed; --- Sample length by the "320mm" was changed to "shall meet the gauge length of 200mm"; --- Increase the value of constant elongation or constant load value can be determined based on product requirements or parties agreement or yield point; --- Remove the specimen holder when pretension provisions; --- Increase the response time of the sample tolerance; --- Remove the requirement on the flatbed of a sample reply; --- Modify the content of the test report; --- Increased Seeking a schematic diagram B.1 yield point. The standard proposed by China Textile Industry Association. The standard basis by the National Textile Standards Technical Committee of Standardization Technical Committee (SAC/TC209/SC1) centralized. This standard was drafted. Hangzhou Paradise Umbrella Group Co., Ltd., China Textile Standard (Beijing) Co., Inspection and Certification Center. The main drafters of this standard. Han Yuru, Zheng Yuying, Heling Jun, Xu Road, Zhang Lili. This standard replaces the standards previously issued as follows. --- FZ/T 75004-1993. Elongation and permanent deformation Tensile Test Method for Coated Fabrics1 ScopeThis standard specifies the determination coated fabric tensile elongation, tensile elongation with fixed or constant load mode delay distortion and tensile set of test Test methods. This standard applies to all kinds of coated fabrics.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 3291.3 textile material properties and test - Part 3. General GB/T 6529 Textiles Standard conditioning and testing atmosphere3 Terms and DefinitionsGB/T 3291.3 and define the following terms and definitions apply to this document. 3.1 Tensile set tensilepermanentdeformation Sample under specified conditions after tensile deformation removing tension and restore a certain time, the deformation can not be restored. 3.2 Tensile permanent deformation rate tensilepermanentdeformationrate Percentage tensile set after a predetermined length of the specimen elongation values than the stretched condition. 3.3 Tensile deformation tensiledelayeddeformation delay After the sample under specified conditions elongation, tensile instantly removed, the residual deformation of the specimen. Note. Including slow elastic deformation and permanent deformation. 3.4 Tensile deformation rate tensiledelayeddeformationrate delay After a predetermined delay than the tensile elongation percentage of the value of the condition of deformation after stretching the length of the sample. Principle 4 Tensile specimen at a predetermined speed to a predetermined value or elongation is applied to the predetermined load value, and to maintain the tensile deformation after a certain time or the load, in order to The same rate of return of removal load, the sample must reply at time zero load, measuring deformation of the sample did not recover.5 equipment and instruments5.1 constant elongation (CRE) tester 5.1.1 The two instruments should be at the center of the holder of the tension axis, the jaw line should be perpendicular to the tensile axis. Hold the specimen holder should be able to make ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 75004-2014_English be delivered?Answer: Upon your order, we will start to translate FZ/T 75004-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of FZ/T 75004-2014_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 75004-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version FZ/T 75004-2014?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 75004-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
