FZ/T 12007-2014 English PDFUS$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. FZ/T 12007-2014: Carded cotton and vinylon blended grey yarn Status: Valid FZ/T 12007: Historical versions
Basic dataStandard ID: FZ/T 12007-2014 (FZ/T12007-2014)Description (Translated English): Carded cotton and vinylon blended grey yarn Sector / Industry: Spinning & Textile Industry Standard (Recommended) Classification of Chinese Standard: W12 Classification of International Standard: 59.080.20 Word Count Estimation: 12,194 Date of Issue: 10/14/2014 Date of Implementation: 4/1/2015 Older Standard (superseded by this standard): FZ/T 12007-2005 Quoted Standard: GB/T 398-2008; GB/T 2910.1; GB/T 3292.1; GB/T 3916; GB/T 4743-2009; FZ/T 01050; FZ/T 10007; FZ/T 10008 Regulation (derived from): People's Republic of China Ministry of Industry and Information Technology Notice 2014 No. 63; Industry Standard Filing Notice 2014 No. 12 (Overall No. 180) Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China Summary: This Standard specifies the cotton and PVA (short cotton fibers) blends, cotton fiber content of 50% or more of carded cotton blended yarn qualities dimensional product classification, marking, requirements, test methods, inspection rules and signs, packa FZ/T 12007-2014: Carded cotton and vinylon blended grey yarn---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Carded cotton and vinylon blended grey yarn ICS 59.080.20 W12 People's Republic of China textile industry standards Replacing FZ/T 12007-2005 Carded cotton blended yarn qualities dimension Issued on. 2014-10-14 2015-04-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. Instead of the standard FZ/T 12007-2005 "cotton blended yarn qualities dimension." This standard FZ/T 12007-2005 compare the main changes are as follows. --- Adjust the standard name was changed to "carded cotton blended yarn qualities dimension"; --- Revised Chapter 3 classification will be calculated 100m standards of quality and standards into the dry mass of Appendix B to delete the line density Demand content; --- The technical requirements, the adjustment range of the nominal linear density, modify the name of part of the project, evenness assessment retain only evenness Coefficient of variation; --- Coefficient of variation of breaking strength, linear density coefficient of variation, evenness variation coefficient and other indicators have been adjusted; --- Cancel indicators along the lower assessment, according to the technical requirements of the products, such as a minimum assessment. The standard proposed by China Textile Industry Association. This standard by the National Technical Committee of Standardization Technical Committee printing and dyeing cotton textiles (SAC/TC209/SC2) centralized. This standard was drafted. Zhejiang Spring Textile Group Co., Ltd., Qingdao Textiles Holding Corporation, China Textile Industry Association, Shanghai textile industry technical supervision. The main drafters of this standard. Chennai Ying, Dong Xiao Wei, Zhang Jianhui, Jing Shen whole, Wang Jing Yi. This standard replaces the standards previously issued as follows. --- FJ519-1982; --- FZ/T 12007-1999, FZ/T 12007-2005. Carded cotton blended yarn qualities dimension1 ScopeThis standard specifies the cotton and polyvinyl alcohol (short cotton fibers) blended, cotton fiber content of 50% or more of carded cotton blended yarn qualities peacekeeping capacity Product classification, marking, requirements, test methods, inspection rules and signs, packaging. This standard applies to ring carded dimension blended yarn qualities. This standard does not apply carded special purpose dimension blended yarn qualities.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 398-2008 cotton yarn qualities GB/T 2910.1 Textiles - Quantitative chemical analysis - Part 1. General principles of testing GB/T 3292.1 Textiles yarn evenness test methods - Part 1. capacitance method GB/T 3916 Textiles - Yarn single yarn breaking strength and elongation measurement (CRE Act) GB/Textiles - Determination of the normal density of the yarn skein T 4743-2009 FZ/T 01050 Textile yarn defect grading and inspection methods capacitive FZ/T 10007 pure cotton and chemical fiber spinning, blended yarn qualities inspection rules FZ/T 10008 cotton and chemical fiber spinning pure, blended yarn qualities marking and packaging 3 product classification, marking 3.1 carded dimensional qualities blended yarn blended ratio and linear density classification. 3.2 codenamed raw cotton as C, PVA is V. Pub 3.3 fiber content to mass ratio, expressed as a specific content of cotton/PVA content. 3.4 front line density indicated yarn feed code, product blending ratio. Example. The Victoria blended cotton yarn having a linear density of 18.5tex, cotton content of 65% polyvinyl alcohol content of 35%, should be written as. C/V65/3518.5tex.4 Requirements4.1 Project 4.1.1 carded dimension blended yarn of the present technical requirements include yarn breaking strength coefficient of variation, variation coefficient of linear density, breaking strength yarn, thread Density deviation rate, evenness variation coefficient, kilometers neps, one hundred thousand meters of yarn faults, fiber content deviation eight indicators. 4.1.2 carded blended dimensional character line technical requirements include singlet breaking strength coefficient of variation, linear density coefficient of variation, in-line fracture strength line Density deviation rate, evenness variation coefficient, fiber content deviation six indicators. 4.2 grading regulations 4.2.1 of the same material, the same single continuous production process of the same specifications as one or several test batches. According to the prescribed test ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 12007-2014_English be delivered?Answer: Upon your order, we will start to translate FZ/T 12007-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of FZ/T 12007-2014_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 12007-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version FZ/T 12007-2014?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 12007-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
