CQC-C0201.02-2014 English PDFUS$1479.00 · In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email. CQC-C0201.02-2014: China Compulsory Certification Implementation Rules--Electrical accessories--Household and similar plugs and sockets
Basic dataStandard ID: CQC-C0201.02-2014 (CQC C0201.02-2014; CQC-C02-01.02-2014; CQC-C0201.02-2014)Description (Translated English): China Compulsory Certification Implementation Rules--Electrical accessories--Household and similar plugs and sockets Sector / Industry: China Quality Certification Center - CCC Implementation Detailed-Rules Classification of Chinese Standard: CQC Word Count Estimation: 37,319 Date of Issue: 9/1/2014 Date of Implementation: 9/1/2014 Issuing agency(ies): China Quality Certification Center CQC-C0201.02-2014: China Compulsory Certification Implementation Rules--Electrical accessories--Household and similar plugs and sockets---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. China Compulsory Certification Implementation Rules--Electrical accessories--Household and similar plugs and sockets Number. CQC-C0201.02-2014 Implementation Rules for Compulsory Product Certification Electrical accessories--plugs and sockets for household and similar purposes Published on September 01,.2014 Implemented on September 01,.2014 China Quality Certification Center table of Contents0.General requirements ... 1 0.1 Preface ... 1 0.2 Definition of terms ... 1 1. Classification management requirements of production enterprises ... 2 2.Selection of authentication mode and related requirements ... 4 2.1 Basic authentication mode ... 4 2.2 Refinement of authentication mode ... 4 2.3 Applicability of authentication mode ... 4 3.Division of authentication unit ... 5 3.1 Basic principles for the division of certification units ... 5 3.2 Principles of product coverage in the same certification unit ... 6 3.3 Planning of certification units for products of different certification clients, different producers, and different production enterprises Sub-principle ... 6 4. Certification process and time limit requirements ... 6 4.1 Certification application submission and acceptance ... 6 4.2 Authentication scheme ... 7 4.3 Application Information Review ... 7 4.4 Type test ... 8 4.5 Inspection of Enterprise Quality Assurance Ability and Product Consistency (Initial Factory Inspection) ... 8 4.6 Evaluation and approval of certification results ... 9 4.7 Other matters ... 9 5. Certification application materials and related requirements ... 9 6. Sample testing requirements (number of samples sent, testing items, test plan) ... 10 6.1 Requirements for sampling (sampling) ... 10 6.2 Test item requirements ... 10 6.3 Test sample requirements ... 11 6.4 Conduct of tests ... 11 7. Relevant requirements for factory inspection and supervision after certification ... 11 7.1 Definition of factory inspection objects and coverage requirements of factory inspection ... 11 7.2 Compulsory product certification for plugs and sockets for household and similar purposes Product consistency check requirements ... 12 7.3 Factory quality control testing requirements for plugs and sockets for household and similar purposes ... 12 7.4 Key components and materials for household and similar plugs and sockets ... 12 7.5 Factory inspection requirements for ODM/OEM mode ... 12 7.6 Supervision after certification ... 13 8 Requirements for certification changes (including standard version changes) ... 16 8.1 Changes and Requests ... 16 8.2 Evaluation and approval of changes ... 16 8.3 Requirements when certifications change according to standards ... 17 9.List of key components and materials ... 17 9.1 Key components and materials ... 17 9.2 Key component and material control requirements ... 17 9.3 Requirements for key components and materials in the product description report ... 17 10. Basis of Charges and Related Requirements ... 17 11.Process and time limit requirements related to technical disputes and appeals ... 17 Annex 1. Unit division and number of samples sent ... 18 Attachment 2. Household and similar purpose plug and socket companies have the same quality assurance capabilities and products Sex inspection requirements ... 20 Annex 3. Factory quality control testing requirements for plugs and sockets for household and similar purposes ... 21 Annex 4. Periodic confirmation inspection and control requirements for key components and materials ... 24 Annex 5. Key components and materials for plugs and sockets for household and similar purposes and their declaration requirements Seek ... 26 Attachment 6. Types of plugs and sockets for household and similar purposes under surveillance sampling inspection .. 28 Attachment 7. Use inspection resources of production enterprises to carry out inspections (or witness inspections) Requirements ... 29 0. General requirements 0.1 Preface Implementing Rules for Compulsory Certification of Plugs and Sockets for Household and Similar Uses Then) is in accordance with the implementation rules of compulsory certification of electrical accessories (CNCA-C02-01..2014) (the following (Referred to as the implementation rules), as a supporting document for certification implementation rules. Ground truth Regulations, and quality manuals, program files, Related requirements such as work instructions, in order to maintain the effectiveness of product certification, improve product quality, Service certification enterprises and the principles of controlling certification risks shall formulate and publish the implementation details of this certification. This certification implementation details is a detailed refinement of the implementation rules and should be used in conjunction with the implementation rules. The product scope and certification basis to which the detailed rules apply are consistent with the relevant provisions in the implementation rules. And issued by the National Certification and Accreditation Administration (hereinafter referred to as the National Certification and Accreditation Administration) The announcement of catalogue definition and catalogue adjustment will be adjusted. CQC establishes classification management requirements for production enterprises in accordance with the provisions of the certification implementation rules, and concludes According to the classification of production enterprises, clarify the mandatory product certification of plugs and sockets for household and similar purposes. Implementation requirements. 0.2 Definition of terms 0.2.1 Use of equipment inspection of production enterprises (referred to as TMP method) The test is performed by the personnel of the designated testing institution using the equipment of the production enterprise, and the production The company's testing staff assists, and the testing report is issued by the designated testing agency. 0.2.2 Witness detection of production enterprises (referred to as WMT method) The test is performed by the testers of the manufacturing enterprise using their equipment, and the personnel of the designated testing organization Witness the testing items and testing conditions, the production company test personnel issued original records, Draft the test report, review and confirm the personnel of the designated testing agency Issued by the testing agency. 0.2.3 ODM (Original Design Manufacturer) Use the same quality assurance capability requirements, the same product design, production process control and inspection requirements Design, process and produce the same product for one or more producers (manufacturers) factory. 0.2.4 ODM initial certification certificate holder Organizations that have obtained product certification for the first time for ODM products. 0.2.5 OEM (Original Equipment Manufacturer) Production of certified products according to the design, production process control and inspection requirements provided by the client Production plant. The client can be a certification client or a producer (manufacturer); According to the design, production process control and inspection requirements provided by the client, Prepare for production certified products. 1. Classification management requirements of production enterprises CQC collects and sorts all kinds of information related to the quality of certified products and their manufacturing companies. The production enterprise carries out dynamic classification management. Certification clients, producers, and manufacturing companies should Cooperate. There are four types of production enterprises, which are represented by A, B, C, and D types. Classified by Based on at least the following information. ① Factory inspection (including initial factory inspection and follow-up inspection after certification); ② Supervision sampling test results (production site sampling or market/user sampling); ③ State, provincial, CCC special spot checks, etc. ④ Media exposure and quality information feedback from product users and the public; ⑤ Testing ability of certified products; ⑥ Other information. CQC classifies and classifies production enterprises according to the following basic principles of classification, and This kind of information regularly or irregularly reclassifies and grades production enterprises to achieve dynamic management. The classification results of manufacturing enterprises must be gradually improved according to the order of DCBA, and the order of ABCD The order descends step by step or across steps. Table 1 Classification principles of manufacturing enterprises Classification of Business Categories Class A and B companies provide relevant information to the certification body. Relevant information provided by the enterprise is used to conduct a comprehensive risk assessment and determine the classification results. What is assessed Include at least the following. a) Factory inspection. the initial factory inspection in the past 2 years, there is no site inspection after the certification Validation or failure; b) Product testing and random inspection results. No non-conformities were found in the supervision and inspection after the certification in the past 2 years. The results of various national and provincial quality supervision and random inspections and consistency confirmation inspections are "combined grid"; c) Pass the CQC review of the testing capabilities of the manufacturing company. d) Other information related to the quality of the certified product and its manufacturer. Class B other than Class A, C, and D other manufacturing enterprises. For production companies without any quality information Industry, the default classification is B. Class C meets one of the following conditions. a) The factory inspection conclusion is judged as "on-site verification" (except for reasons of standard version change); b) The quality of the certified product has been exposed by the media and is a corporate responsibility, but does not involve suspension, Revocation of certification c) Based on the comprehensive evaluation results of the quality information related to the production company and certified products, CQC believes that Adjusted for class C. Class D meets one of the following conditions. a) The initial factory inspection and follow-up inspection after certification are judged to be "failed"; b) The results of supervision and inspection after the certification are unqualified; c) refusal to inspect and/or supervise sampling without justification; d) The quality of the certified products exposed by the media has a great impact and is a corporate responsibility; e) National and provincial product quality supervision and random inspection results are unqualified and unqualified The project has a serious impact on the quality of the certified products; f) Failure to meet the requirements of other compulsory product certifications, suspension or cancellation of certifications; g) CQC believes that comprehensive evaluation of quality information related to manufacturing companies and certified products is needed Adjusted to class D. If there are changes, the CQC public documents shall prevail. 2. Selection of authentication mode and related requirements 2.1 Basic authentication mode The basic certification mode is. supervision after type testing. 2.2 Refinement of authentication mode According to the basic certification mode of certification, combined with the classification management principles of production enterprises, Enterprises in the same category will add relevant certification elements as appropriate in the certification model, as detailed below. Mode 1. Supervision after type test. Mode 2. Supervision after initial factory inspection for type test. Among them, relevant requirements for post-certification supervision are set out in 7.6 "Supervision after Certification". 2.3 Applicability of the authentication model The certification client can refer to Table 2 for the applicability of the certification model according to his actual situation. File an application for an applicable certification model. Table 2 Applicability of authentication mode Business category application type Initial application for extension application Class A/Mode 1 Mode 1 Type B mode 2 mode 2 mode 1 Class C/Mode 2 Mode 1 Class D/Mode 2 Mode 1 Initial application. For manufacturers that have not obtained the "Implementation Rules for Compulsory Product Certification-Circuit Switching and Protection or Connection of Electricity Device (electrical accessories) (CNCA-C02-01..2014) for the first time Certificate entrustment; application for extension. For manufacturers that have obtained the "Implementation Rules for Compulsory Product Certification-Circuit Switch Connection of electrical equipment (electrical accessories) (CNCA-C02-01..2014) The certification is entrusted, and the factory definition code is different from the certified factory definition code. Re-certification commission for CCC certificate of products within the scope of the detailed rules The code is the same. CQC based on the characteristics of the product applying for certification and the principles of certification risk control, The result of the class management determines the authentication mode applicable to the authentication client. 3. Division of authentication unit 3.1 Basic principles for the division of certification units In principle, the structure is the same, the function is the same, and the main materials (see Annex 5) are used. Different types of electrical accessories (such as metals, thermoplastics, thermosets, etc.) As an authentication unit. Specific unit division requirements are detailed in Annex 1. 3.1.1 The number of poles of the product cannot be in the same certification unit; the removable product and the non-removable product Products cannot be in the same certification unit. 3.1.2 Different terminal types are different units. If there are two types of terminals on the same product, Mainly divided into a large number of terminals. 3.1.3 For a multi-position fixed socket on the same base, the single-phase two-pole socket (including multiple positions) is one Unit; single-phase two-pole with grounding socket (including multiple bits) as a unit; multiple combinations of different hole types The socket is a unit. 3.2 Principles of product coverage in the same certification unit 3.2.1 There can be multiple rated current levels in the same unit. Basically the same conditions At the same time, high rated current products can cover low rated current products. 3.2.2 Sockets with switches can cover sockets without switches with basically the same structure. combination Type modular sockets can cover the functional parts therein, and multiple hole sockets cover a single hole socket. 3.2.3 For fixed sockets with auxiliary devices, their auxiliary devices shall be evaluated in accordance with corresponding standards. 3.3 Planning of certification units for products of different certification clients, different producers, and different production enterprises Sub-principle 3.3.1 Different certification clients, different producers (manufacturers), different production enterprises (production Factory) products should be used as different application units. 3.3.2 Same product produced by the same producer (manufacturer) and different production enterprises (manufacturing plants) Products, when the manufacturer is Class A, the type test can be carried out in one unit only. Products produced by enterprises need to provide samples/data for consistency check; B, C, D production companies For industry products, type testing is required for each unit. 3.3.3 The same product produced by different producers and the same production enterprise can be in only one unit Type tests on samples of other manufacturers, samples/data from other manufacturers' products are required to be consistent Sexual verification. 4. Certification process and time limit requirements 4.1 Certification application submission and acceptance When applying, you must fill in the necessary company information and product information as required, and also provide if necessary Business registration certificate, organization code, product description, agreement, etc. CQC reviews applications in accordance with relevant requirements, and issues acceptance or rejection within 2 working days Notification of acceptance, or requesting the certification client to re-apply for certification after rectification. After accepting the certification application, CQC determines the application site according to the classification management requirements of the manufacturing enterprise. Applicable certification models and divisions, formulate certification schemes and notify certification clients. The authentication client can propose the authentication mode and Unit division requirements, provide the necessary information, CQC will be based on the classification management results of production enterprises and The client negotiates and determines the applicable authentication mode and unit division. Consensus accepted Please also formulate an authentication scheme; if the negotiation is inconsistent, the client may use other applicable authentication models Application for modification of formula and unit. 4.2 Certification scheme CQC will formulate a certification scheme within 2 working days after acceptance and notify the certification commission people. Certification schemes usually include the following. (1) The authentication mode and unit division adopted; (2) List of application materials to be submitted; (3) Laboratory information; (4) The required certification process and time limit; (5) Expected certification costs; (6) Contact information of CQC staff; (7) Responsibility arrangements of certification parties in all aspects of certification implementation; (8) Other matters that need to be explained. 4.3 Application Information Review After the application is accepted, the certification client shall report to the CQC and/or laboratory as required by the certification scheme. Provide relevant application materials and technical materials. CQC and/or laboratories shall provide relevant information provided by the certification client within 5 working days Audit, and send notification of the results of the data review to the certification client. If the data does not meet the requirements, The certification client should be required to make rectifications. The certification client shall be responsible for the authenticity of the information provided. CQC and laboratories manage and keep the certification materials provided by the certification clients Confidential obligation. 4.4 Type test For the application for certification that requires type testing, and the application data is qualified, CQC Formulate a type test plan within 2 working days and notify the certification client. Type test party The plan includes sample requirements and quantities, testing standards and items, and laboratory information. Usually, the certification client prepares the samples according to the requirements of the type test plan and sends them to Designated laboratories; if necessary, CQC will conduct type tests for C and D manufacturers The requirements of th......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of CQC-C0201.02-2014_English be delivered?Answer: Upon your order, we will start to translate CQC-C0201.02-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of CQC-C0201.02-2014_English with my colleagues?Answer: Yes. The purchased PDF of CQC-C0201.02-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
