HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 2820.9-2024 PDF English

US$290.00 · In stock · Download in 9 seconds
GB/T 2820.9-2024: Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

GB/T 2820.9: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] deliveryName of Chinese StandardStatus
GB/T 2820.9-2024English290 Add to Cart 0-9 seconds. Auto-delivery Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations Valid
GB/T 2820.9-2002English559 Add to Cart 3 days Reciprocating internal combustion engine driven alternating current generating sets -- Part 9: Measurement and evaluation of mechanical vibrations Obsolete

Excerpted PDFs (Download full copy in 9 seconds upon purchase)

PDF Preview: GB/T 2820.9-2024
      

Similar standards

GB/T 2820.7   GB/T 2317.4   GB/T 2820.1   GB/T 2820.5   

GB/T 2820.9-2024: Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT2820.9-2024
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 29.160.40 CCS K 52 GB/T 2820.9-2024 / ISO 8528-9:2017 Replacing GB/T 2820.9-2002 Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations (ISO 8528-9:2017, IDT) ISSUED ON: APRIL 25, 2024 IMPLEMENTED ON: NOVEMBER 01, 2024 Issued by: State Administration for Market Regulation; National Standardization Administration.

Table of Contents

Foreword ... 3 Introduction ... 5 1 Scope ... 7 2 Normative references ... 7 3 Terms and definitions ... 8 4 Symbols and abbreviations ... 8 5 Provisions and additional requirements ... 9 6 Measuring equipment ... 9 7 Measurement direction and measurement position ... 9 8 Working conditions during measurement ... 11 9 Evaluation of measurement results ... 11 10 Measurement report ... 11 Appendix A (Informative) Typical structure of generator set ... 12 Appendix B (Informative) Explanation on vibration evaluation of generator sets ... 14 Appendix C (Informative) Vibration values ... 15 Appendix D (Informative) Measurement report ... 16 References ... 18

Foreword

This document was drafted in accordance with the provisions of GB/T 1.1-2020 "Directives for standardization - Part 1: Rules for the structure and drafting of standardizing documents". This document is Part 9 of GB/T 2820 "Reciprocating internal combustion engine driven alternating current generating sets". GB/T 2820 has published the following parts: - Part 1: Application, ratings and performance; - Part 2: Engines; - Part 3: Alternating current generators for generating sets; - Part 4: Controlgear and switchgear; - Part 5: Generating sets; - Part 6: Test methods; - Part 7: Technical declarations for specification and design; - Part 8: Requirements and tests for low-power generating sets; - Part 9: Measurement and evaluation of mechanical vibrations; - Part 10: Measurement of airborne noise by the enveloping surface method; - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods; - Part 12: Emergency power supply to safety services. This document replaces GB/T 2820.9-2002 "Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations". Compared with GB/T 2820.9-2002, in addition to structural adjustments and editorial changes, the main technical changes are as follows: - DELETE the symbols of acceleration and peak acceleration (see Chapter 4 of the 2002 edition); - DELETE the measured value (see Chapter 6 of the 2002 edition); - CHANGE the working state of the generator set during measurement (see Chapter 8; Chapter 9 of the 2002 edition). Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations

1 Scope

This document describes the procedures for measuring and evaluating the specified external mechanical vibration characteristics of the generator set at specified measurement positions. This document is applicable to fixed and mobile AC generator sets driven by reciprocating internal combustion engines with rigid and/or elastic mounting. This document is applicable to land and marine use, not to generator sets used in aviation or generator sets used to drive land vehicles and locomotives. For some specific applications (such as power supply to hospitals, high-rise buildings, etc.), additional requirements are required. The provisions of this document are regarded as the basis for these applications. For generator sets driven by other reciprocating prime movers (such as biogas engines, steam engines, etc.), the provisions of this document are regarded as the basis for these applications.

2 Normative references

The contents of the following documents constitute the essential clauses of this document through normative references in the text. Among them, for dated references, only the version corresponding to the date applies to this document; for undated references, the latest version (including all amendments) applies to this document. ISO 2041 Mechanical vibration, shock and condition monitoring - Vocabulary Note: GB/T 2298-2010 Mechanical vibration, shock and condition monitoring vocabulary (ISO 2041:2009, IDT). ISO 8528-5:2022 Reciprocating internal combustion engine driven alternating current generating sets - Part 5: Generating sets Note 1: There is no technical difference between the referenced content of ISO 8528- 5:2022 and the referenced content of ISO 8528-5:2013. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.


      

Tips & Frequently Asked Questions

Question 1: How long will the true-PDF of English version of GB/T 2820.9-2024 be delivered?

Answer: The full copy PDF of English version of GB/T 2820.9-2024 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 2820.9-2024_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 2820.9-2024_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. www.ChineseStandard.us -- GB/T 2820.9-2024 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

Question 5: Should I purchase the latest version GB/T 2820.9-2024?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2820.9-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

How to buy and download a true PDF of English version of GB/T 2820.9-2024?

A step-by-step guide to download PDF of GB/T 2820.9-2024_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 2820.9-2024".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9