YS/T 509.10-2008 PDF English
US$150.00 · In stock · Download in 9 secondsYS/T 509.10-2008: Methods for chemical analysis of spodumene and lepidolite concentrates. Determination of manganous oxide content. Persulfate oxidation photometric method Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid YS/T 509.10: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| YS/T 509.10-2008 | English | 150 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Methods for chemical analysis of spodumene and lepidolite concentrates. Determination of manganous oxide content. Persulfate oxidation photometric method
| Valid |
| YS/T 509.10-2006 | English | 199 |
Add to Cart
|
2 days
|
Methods for chemical analysis of sqodumenite and lepidolite concentrates The ion selective electrode method for the determination of fluorine content in lepidolite concentrates
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: YS/T 509.10-2008
YS/T 509.10-2008: Methods for chemical analysis of spodumene and lepidolite concentrates. Determination of manganous oxide content. Persulfate oxidation photometric method
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/YST509.10-2008
YS
NONFERROUS METALS INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 77.120.99
H 64
Replacing YS/T 59.11-2006
Methods for Chemical Analysis of Spodumene and
Lepidolite Concentrates - Determination of Manganous
Oxide Content - Persulfate Oxidation Photometric Method
ISSUED ON: MARCH 12, 2008
IMPLEMENTED ON: SEPTEMBER 01, 2008
Issued by: National Development and Reform Commission of China
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Summary of Method ... 5
3 Reagents ... 5
4 Instrument ... 6
5 Specimen ... 6
6 Analysis Procedures ... 6
7 Calculation of the Analysis Results ... 8
8 Precision ... 8
9 Quality Assurance and Control ... 9
Foreword
YS/T 509 Methods for chemical analysis of spodumene and lepidolite concentrates
consists of the following 11 parts:
--- Part 1: Determination of lithium oxide sodium oxide and potassium oxide
contents - Flame atomic absorption spectrometric method;
--- Part 2: Determination of rubidium oxide and caesium oxide contents - Flame
atomic absorption spectrometric method;
--- Part 3: Determination of silicon dioxide content - Gravimetric-molybdenum blue
photometric method;
--- Part 4: Determination of aluminium oxide content - EDTA compleximetric method;
--- Part 5: Determination of ferric oxide content- O-phenanthroline photometric
method and EDTA compleximetric method;
--- Part 6: Determination of phosphorus pentoxide content - The molybdenum blue
photometric method;
--- Part 7: Determination of beryllium oxide content – Chromazurol S and
cetyltrimethyl ammonium bromide spectrophotometric met;
--- Part 8: Determination of calcium oxide and magnesium oxide content - Flame
atomic absorption spectrometric method;
--- Part 9: Determination of fluorine content - Ion selective electrode method;
--- Part 10: Determination of manganous oxide content-Persulfate oxidation
photometric method;
--- Part 11: Determination of loss on ignition - Gravimetric method.
This Part is Part 10.
This Part replaced YS/T 509.11-2006 Methods for Chemical Analysis of Spodumene
and Lepidolite Concentrates - The Persulfate Oxidation Photometric Method for the
Determination of Manganous Oxide Content (original GB/T 3885.11-1983).
Compared with YS/T 509.11-2006, the major changes of this Part are as follows:
--- Re-edit the text format;
--- Supplement the quality assurance and control clauses; and add the repeatability
clause.
Methods for Chemical Analysis of Spodumene and
Lepidolite Concentrates - Determination of Manganous
Oxide Content - Persulfate Oxidation Photometric Method
1 Scope
This Part specifies the determination method of manganous oxide content in
spodumene and lepidolite concentrates.
This Part is applicable to the determination of manganous oxide content in spodumene
and lepidolite concentrates. Measurement range: 0.05%~1.00%.
2 Summary of Method
The sample is decomposed with hydrofluoric acid, nitric acid, and sulfuric acid. The
sulfuric acid emits smoke to drive off silicon and fluorine. Potassium pyrosulfate is
melted and leached with water. In an acid medium, silver salt is used as a catalyst to
oxidize divalent manganese to purple-red permanganate with ammonium persulfate;
and the manganese content is determined by spectrophotometry. Phosphoric acid and
urea are added to eliminate the interference of ferric iron and the reagent blank
generated during the oxidation process.
3 Reagents
Unless otherwise specified, only reagents and distilled water confirmed to be
analytically pure or water of equivalent purity are used in the analysis.
3.1 Potassium pyrosulfate.
3.2 Ammonium persulfate.
3.3 Urea.
3.4 Hydrofluoric acid (ρ1.15g/mL).
3.5 Nitric acid (ρ1.42g/mL).
3.6 Sulfuric acid (1+1).
6.4 Determination
6.4.1 Place the test material (6.1) in a 50mL platinum dish; moisten it with water; add
1mL of nitric acid (3.5), 2mL of sulfuric acid (3.6), 20mL of hydrofluoric acid (3.4). Then
place on a sand bath and heat to decompose; steam until the white smoke of sulfur
trioxide is exhausted; take it off; and cool.
6.4.2 Add 5g~7g of potassium pyrosulfate (3.1) into a platinum dish; place it in a high-
temperature furnace at 500°C~550°C; heat it until the potassium pyrosulfate melts;
continue to heat up to 700°C; melt for 10min; and take it off, and cool.
6.4.3 Add 20mL of hot water to a platinum dish; heat to extract the melt; and after the
salts are all dissolved; transfer to a 100mL volumetric flask; cool to room temperature;
dilute to the mark with water; and mix well. Pipette the solution according to Table 1;
place it in a 50mL volumetric flask; and dilute with water to about 20mL.
Table 1
6.4.4 Add 2mL of sulfuric acid-nitric acid mixed acid (3.9), 1mL of phosphoric acid (3.7),
0.5g of ammonium persulfate (3.2), 2mL of silver nitrate solution (3.8), 0.1g of urea
(3.3); mix well. Place the volumetric flask in a boiling water bath to develop colour for
5min; take it out; cool to room temperature; dilute to the mark with water; mix well.
6.4.5 Move part of the test solution (6.4.4) into a 3cm cuvette; use the blank with the
test material as a reference; and measure its absorbance at the wavelength of 530nm
on the spectrophotometer. Find the corresponding amount of manganous oxide from
the working curve.
6.5 Drawing of working curve
6.5.1 Pipette 0mL, 1.00mL, 2.00mL, 4.00mL, 6.00mL, 8.00mL, 10.00mL of manganous
oxide solution (3.11); respectively place into a set of 50mL volumetric flasks; dilute
about 20mL with water. Then follow the procedure in 6.4.4.
6.5.2 Move part of the solution (6.5.1) into a 3cm cuvette; use the reagent blank as a
reference; and measure its absorbance at the wavelength of 530nm with a
spectrophotometer. Draw a working curve with the amount of manganous oxide as the
abscissa and the absorbance as the ordinate.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of YS/T 509.10-2008 be delivered?Answer: The full copy PDF of English version of YS/T 509.10-2008 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of YS/T 509.10-2008_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 509.10-2008_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- YS/T 509.10-2008 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version YS/T 509.10-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 509.10-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of YS/T 509.10-2008?A step-by-step guide to download PDF of YS/T 509.10-2008_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "YS/T 509.10-2008".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |