HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

YD/T 868-2007 PDF English

US$130.00 · In stock · Download in 9 seconds
YD/T 868-2007: Technical requirements and measuring methods for additional equipment of telephone set
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

YD/T 868: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] deliveryName of Chinese StandardStatus
YD/T 868-2007English130 Add to Cart 0-9 seconds. Auto-delivery Technical requirements and measuring methods for additional equipment of telephone set Valid
YD/T 868-1996English319 Add to Cart 3 days Technical requirement and test method for digital telephone transmission performances Obsolete

Excerpted PDFs (Download full copy in 9 seconds upon purchase)

PDF Preview: YD/T 868-2007
      

Similar standards

YD/T 993   GB/T 15279   YD/T 907   

YD/T 868-2007: Technical requirements and measuring methods for additional equipment of telephone set


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/YDT868-2007
YD COMMUNICATIONS INDUSTRY STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 33.050.01 M 40 Replacing YD/T 868-1996 Technical requirements and measuring methods for additional equipment of telephone set Issued on: APRIL 16, 2007 Implemented on: OCTOBER 1, 2007 Issued by. Ministry of Industry and Information Technology

Table of Contents

Foreword ... 3 1 Scope ... 5 2 Normative references ... 5 3 Terms, definitions and abbreviations ... 6 3.1 Terms and definitions ... 6 3.2 Abbreviations ... 6 4 Technical requirements ... 6 4.1 Service conditions ... 6 4.2 Functional requirements ... 6 4.3 Basic technical requirements ... 7 4.4 Environmental test requirements ... 8 4.5 Electromagnetic compatibility requirements ... 9 4.6 Safety requirements ... 9 4.7 Lightning protection requirements ... 9 5 Measuring methods ... 9 5.1 Measuring environment ... 9 5.2 Measuring instruments and equipment... 9 5.3 Test items ... 10

Foreword

This Standard replaces YD/T 868-1996, Technical requirements and measuring methods for network access of additional equipment of telephone set. Compared with YD/T 868-1996, the major changes of this Standard are as follows. -- it changes the name of the standard into “Technical requirements and measuring methods for additional equipment of telephone set”; -- it specifies the definitions of additional equipment; -- it adds reference standards; -- the addition of additional equipment having the proxy dialing function shall be as required by YD/T 1361. New requirements are added for additional equipment having the alarm signal sending function; -- the addition of additional equipment having the number identification function shall be as required by YD/T 1277.1. For the measuring methods see the relevant clauses of YD/T 1277.2; -- it adds the safety requirements by directly referencing YD/T 965, The safety requirement and test method for telecommunication terminal equipment; -- it adds the electromagnetic compatibility requirements by directly referencing YD/T 968, Limits and methods of measurement of electromagnetic compatibility for telecommunication terminal equipment; -- it adds the lightning resistance requirements by directly referencing YD/T 993- 1998, The technical requirements and test methods of overvoltages and overcurrents resistibility for telecommunication terminal equipment. The following standards are referenced in the drafting process of this Standard. GB/T 15279, The specifications of automatic telephone set; YD/T 965, The safety requirement and test method for telecommunication terminal equipment; YD/T 968, Requirements and test methods of electromagnetic compatibility for telecommunication terminal equipment; YD/T 993, The technical requirements and test methods of overvoltages and overcurrents resistibility for telecommunication terminal equipment. Technical requirements and measuring methods for additional equipment of telephone set

1 Scope

This Standard specifies the technical requirements and measuring methods for the additional equipment, including functional requirements, basic technical requirements and environmental test, electromagnetic compatibility, safety and lightning protection. This Standard applies to the equipment for the access to the PSTN network, which is capable of performing the auxiliary functions independently or along with the telephone set.

2 Normative references

The provisions in following documents become the provisions of this Standard through reference in this Standard. For dated references, the subsequent amendments (excluding corrigendum) or revisions do not apply to this Standard, however, parties who reach an agreement based on this Standard are encouraged to study if the latest versions of these documents are applicable. For undated references, the latest edition of the referenced document applies. GB/T 15279, The specifications of automatic telephone set YD/T 965, The safety requirement and test method for telecommunication terminal equipment YD/T 968, Limits and methods of measurement of electromagnetic compatibility for telecommunication terminal equipment YD/T 993, The technical requirements and test methods of overvoltages and overcurrents resistibility for telecommunication terminal equipment YD/T 1277.1, Technical specification and testing method of caller identity delivery based on PSTN – Part 1. Technical specification YD/T 1277.2, Technical specification and testing method of caller identity delivery based on PSTN – Part 2. Testing method YD/T 1361, Technical requirements and testing methods for telephone dialer operation of the telephone network and the normal service of the telephone set; 6) the additional equipment, which is connected to an external power supply (including AC mains and batteries), shall not interfere with the service of the telephone set in case of any failure of the external power supply; 7) the additional equipment shall be capable of operating normally in case of any change in the power polarity of the subscriber line; 8) the additional equipment started automatically, shall not do maloperation when the receiving exchange test signals automatically; 9) the additional equipment shall be capable of operating normally under the conditions of 0 ~ 5 km of the subscriber line; 10) the additional equipment shall reset automatically after performing a function; 11) the special functions of the additional equipment shall be as specified in relevant standards. 4.3 Basic technical requirements 1) The DC current absorbed by the additional equipment in the standby condition from the subscriber line shall not be greater than 25 μA; 2) when the terminal equipment is in the working condition, the DC resistance of the additional equipment on the subscriber loop shall not be greater than 130 Ω; 3) when the additional equipment operates independently, its DC resistance shall not be greater than 500 Ω; 4) when the additional equipment is in the standby condition, its AC impedance at the frequency of 1 000 Hz. |Z| ≥ 10 kΩ; 5) when the additional equipment operates independently or along with the telephone set, its stable balanced return loss and echo balanced loss shall be as specified in GB/T 15279; 6) for the additional equipment which has the ringing current testing function, its ringing current activation sensitivity shall not be greater than 100 mVA; 7) the additional equipment of the dialing limit type is equally effective for pulse and double audio frequency dialing. When its dialing limit function is activated (e.g. after the equipment limiting long distance numbers receives a number whose first digit is 0), all numbers received shall be fully limited. The time of dialing limit shall not be less than 5 s; 4.5 Electromagnetic compatibility requirements The electromagnetic compatibility performance of the additional equipment shall be as specified in YD/T 968. 4.6 Safety requirements The safety requirements for the additional equipment shall be as specified in YD/T 965. 4.7 Lightning protection requirements The lightning protection requirements for the additional equipment shall be as specified in YD/T 993.

5 Measuring methods

5.1 Measuring environment Environmental temperature. 15°C ~ 35°C; Relative humidity. 45% ~ 75%; Atmospheric pressure. 86 ~ 106 kPa; The noise level around the test site shall not be greater than 55 dB(A). 5.2 Measuring instruments and equipment 1) The requirements for measuring instruments and equipment are the same as those specified in GB/T 15279. 2) The equivalent network of the AC impedance of the test telephone set is as shown in Figure 1. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.


      

Tips & Frequently Asked Questions

Question 1: How long will the true-PDF of English version of YD/T 868-2007 be delivered?

Answer: The full copy PDF of English version of YD/T 868-2007 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of YD/T 868-2007_English with my colleagues?

Answer: Yes. The purchased PDF of YD/T 868-2007_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. www.ChineseStandard.us -- YD/T 868-2007 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

Question 5: Should I purchase the latest version YD/T 868-2007?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YD/T 868-2007 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

How to buy and download a true PDF of English version of YD/T 868-2007?

A step-by-step guide to download PDF of YD/T 868-2007_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "YD/T 868-2007".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9