YC/T 159-2019 PDF English
US$160.00 · In stock · Download in 9 secondsYC/T 159-2019: Tobacco and tobacco products - Determination of water soluble sugars - Continuous flow method Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid YC/T 159: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| YC/T 159-2019 | English | 160 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Tobacco and tobacco products - Determination of water soluble sugars - Continuous flow method
| Valid |
| YC/T 159-2002 | English | 80 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Tobacco and tobacco products. Determination of water soluble sugars. Continuous flow method
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: YC/T 159-2019
YC/T 159-2019: Tobacco and tobacco products - Determination of water soluble sugars - Continuous flow method
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/YCT159-2019
TOBACCO INDUSTRY STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 65.160
X 85
Replacing YC/T 159-2002
Tobacco and tobacco products - Determination of
water soluble sugars - Continuous flow method
Issued on. DECEMBER 26, 2019
Implemented on. JANUARY 15, 2020
Issued by. State Tobacco Monopoly Administration
Table of Contents
Foreword... 3
1 Scope... 5
2 Normative references... 5
3 Principle... 5
4 Reagents... 5
5 Instruments and materials... 7
7 Result calculation and expression... 8
8 Precision and recovery rate... 9
9 Test report... 10
Annex A (informative) Flow chart of continuous flow analysis of water-soluble
sugar... 12
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009
and GB/T 20001.4-2015.
This Standard replaces YC/T 159-2002 “Tobacco and tobacco products -
Determination of water soluble sugars - Continuous flow method”. Compared
with YC/T 159-2002, in addition to editorial modifications, the main technical
changes are as follows.
- modified green/green pipe sodium hydroxide solution concentration (see
4.2 of this Edition, 4.2 of Edition 2002);
- modified reagent for measuring red/red pipe diameter when reducing sugar
(see 4.6 of this Edition, 4.6 of Edition 2002);
- modified 85°C heating tank volume (see 5.1 of this Edition, 5/1 of Edition
2002);
- added heat-dissipation device (see 5.1 of this Edition, 5.1 of Edition 2002).
Please note that some content of this document may involve patents. The issuer
of this document does not assume responsibility for identifying these patents.
This Standard was proposed by State Tobacco Monopoly Administration.
This Standard shall be under the jurisdiction of Subcommittee on Cigarette of
National Technical Committee on Tobacco of Standardization Administration of
China (SAC/TC 144/SC 1).
The drafting organizations of this Standard. National Tobacco Quality
Supervision and Inspection Center, Shanghai Tobacco Group Beijing Cigarette
Factory, Yunnan China Tobacco Industry Co., Ltd., Yunnan China Tobacco
Recycled Tobacco Co., Ltd., Zhengzhou Tobacco Research Institute, Yunnan
Tobacco Quality Supervision and Inspection Station, Guizhou China Tobacco
Industry Co., Ltd., Henan China Tobacco Industry Co., Ltd., Henan Tobacco
Quality Supervision and Inspection Station, Northwest Tobacco Quality
Supervision and Inspection Station, Guangdong Tobacco Quality Supervision
and Inspection Station, Shandong China Tobacco Industry Co., Ltd.
Main drafters of this Standard. He Shengbao, Zhang Wei, Luo Anna, Liu Nan,
Feng Xiaomin, Wang Yingyuan, Ma Yanjun, Qin Yunhua, Liu Enfen, Wang Ran,
Guo Junwei, Peng Qianrong, Li Wenwei, Peng Lijuan, Ma Li, Du Guorong,
Wang Fei, Wang Kai, Peng Yuntie, Shi Hongyan, Liu Wei, Wang Hongbo,
Zhang Jianfeng, Mao Jian, Ji Houwei, Wu Shouming, Guo Shuwen, Zhao
Haijuan.
Version of standard substituted by this Standard is.
- YC/T 159-2002.
Tobacco and tobacco products - Determination of
water soluble sugars - Continuous flow method
1 Scope
This Standard specifies the method to determine water-soluble sugar (including
water-soluble total sugar and water-soluble reducing sugar) in tobacco and
tobacco products.
This Standard is applicable to the determination of water-soluble sugar in
tobacco and tobacco products. The detection limit of this method is 0.0063%.
quantitation limit is 0.0210%.
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
GB/T 6682, Water for analytical laboratory use - Specification and test
methods
YC/T 31, Tobacco and tobacco products - Preparation of test sample and
determination of water content - Oven method
3 Principle
Use 5% aqueous acetic acid to extract the sample. The sugar in the extract
reacts with p-hydroxybenzoic acid hydrazide. Produce yellow azo compounds
in alkaline media at 85°C.
4 Reagents
Except for special requirements, analytically pure reagents shall be used. The
water shall comply with the regulations for grade one water in GB/T 6682.
4.1 Polyoxyethylene lauryl ether solution (Brij35 solution)
Add 250g of polyoxyethylene lauryl ether to 1L of water. Heat and stir until it is
dissolved.
4.4 Extract (5% acetic acid solution)
Take 50mL of glacial acetic acid. Use water to dilute to 1L, for sample extraction
or preparation of working standard solution.
4.5 Flushing solution (activated 5% acetic acid solution)
Take 1L of 5% acetic acid solution (4.4). Add 0.5mL of Brij35 solution (4.1), for
flushing of continuous flow analyzer pipeline.
4.6 0.2mol/L hydrochloric acid solution
4.7 0.5mol/L hydrochloric acid solution
In the fume hood, slowly add 42mL of fuming hydrochloric acid (mass fraction
is 37%) to 500mL of water. Use water to dilute to 1L.
4.10 5% p-hydroxybenzoic acid hydrazide solution
Add 250mL of 0.5mol/L hydrochloric acid solution (4.7) to a beaker. Add 25g of
paraben hydrazide (4.9) to make it dissolved. Add 10.5g of citric acid (C6H8O7
• H2O). After dissolution, transfer to a 500mL volumetric flask. Use 0.5mol/L
hydrochloric acid solution to dilute to the scale. Store at 0°C~4°C.
4.11 D-glucose, purity ≥99.5%.
4.12 Standard stock solution. Weigh 20.0g of dry D-glucose (4.11) in a beaker,
to the nearest of 0.0001g. Use water to dissolve then transfer into a 500mL
volumetric flask and set volume to the scale. The standard stock solution is
stored in the refrigerator at 0°C~4°C. The validity is 1 month.
4.13 Series standard working solution. Use 5% acetic acid solution (4.4) to
prepare at least 5 standard working solution from stock solution. The
concentration range shall cover the expected sample content. The standard
stock solution is stored in the refrigerator at 0°C~4°C. The validity is 2 weeks.
5 Instruments and materials
5.1 Continuous flow analyzer, consisting of the following parts.
5.2 Balance, with a sensitivity of 0.0001g.
5.3 Oscillator.
5.4 Quantitative filling injector or pipette.
5.5 50mL Erlenmeyer flask with stopper.
5.6 Rapid qualitative filter paper.
6 Analysis steps
6.1 Sample preparation
Prepare sample according to YC/T 31 and measure its moisture content.
6.2 Sample processing
Weigh 0.25g of sample in the 50mL Erlenmeyer flask with stopper (5.5), to the
nearest of 0.0001g. Add 25mL of 5% acetic acid solution (4.4).
6.3 Instrument analysis
Operate the series of standard working solution (4.13) and subsequent filtrate
of sample processing (6.2) on the instrument. See Annex A for the analysis
flowchart. If the sample concentration exceeds the standard working solution
concentration range, it shall be diluted before measurement.
7 Result calculation and expression
7.1 Calculation of water-soluble sugar
The water-soluble sugar content is calculated according to formula (1).
7.2 Result expression
Take the average of two parallel determination results as the measurement
result. If the measured water-soluble sugar content is greater than or equal to
10.0%, the result is to the nearest of 0.1%. If it is less than 10.0%, the result is
to the nearest of 0.01%.
8 Precision and recovery rate
See Table 1 for the precision results of this method.
9 Test report
The test report shall indicate.
Annex A
(informative)
Flow chart of continuous flow analysis of water-soluble sugar
Figure A.1 shows the flow chart of continuous flow analysis of water-soluble
sugars injected at high flow rate. Figure A.2 shows the flow chart of continuous
flow method analysis of water-soluble sugar injection at low flow rate.
YC/T 159-2019
TOBACCO INDUSTRY STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 65.160
X 85
Replacing YC/T 159-2002
Tobacco and tobacco products - Determination of
water soluble sugars - Continuous flow method
Issued on. DECEMBER 26, 2019
Implemented on. JANUARY 15, 2020
Issued by. State Tobacco Monopoly Administration
Table of Contents
Foreword... 3
1 Scope... 5
2 Normative references... 5
3 Principle... 5
4 Reagents... 5
5 Instruments and materials... 7
7 Result calculation and expression... 8
8 Precision and recovery rate... 9
9 Test report... 10
Annex A (informative) Flow chart of continuous flow analysis of water-soluble
sugar... 12
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009
and GB/T 20001.4-2015.
This Standard replaces YC/T 159-2002 “Tobacco and tobacco products -
Determination of water soluble sugars - Continuous flow method”. Compared
with YC/T 159-2002, in addition to editorial modifications, the main technical
changes are as follows.
- modified green/green pipe sodium hydroxide solution concentration (see
4.2 of this Edition, 4.2 of Edition 2002);
- modified reagent for measuring red/red pipe diameter when reducing sugar
(see 4.6 of this Edition, 4.6 of Edition 2002);
- modified 85°C heating tank volume (see 5.1 of this Edition, 5/1 of Edition
2002);
- added heat-dissipation device (see 5.1 of this Edition, 5.1 of Edition 2002).
Please note that some content of this document may involve patents. The issuer
of this document does not assume responsibility for identifying these patents.
This Standard was proposed by State Tobacco Monopoly Administration.
This Standard shall be under the jurisdiction of Subcommittee on Cigarette of
National Technical Committee on Tobacco of Standardization Administration of
China (SAC/TC 144/SC 1).
The drafting organizations of this Standard. National Tobacco Quality
Supervision and Inspection Center, Shanghai Tobacco Group Beijing Cigarette
Factory, Yunnan China Tobacco Industry Co., Ltd., Yunnan China Tobacco
Recycled Tobacco Co., Ltd., Zhengzhou Tobacco Research Institute, Yunnan
Tobacco Quality Supervision and Inspection Station, Guizhou China Tobacco
Industry Co., Ltd., Henan China Tobacco Industry Co., Ltd., Henan Tobacco
Quality Supervision and Inspection Station, Northwest Tobacco Quality
Supervision and Inspection Station, Guangdong Tobacco Quality Supervision
and Inspection Station, Shandong China Tobacco Industry Co., Ltd.
Main drafters of this Standard. He Shengbao, Zhang Wei, Luo Anna, Liu Nan,
Feng Xiaomin, Wang Yingyuan, Ma Yanjun, Qin Yunhua, Liu Enfen, Wang Ran,
Guo Junwei, Peng Qianrong, Li Wenwei, Peng Lijuan, Ma Li, Du Guorong,
Wang Fei, Wang Kai, Peng Yuntie, Shi Hongyan, Liu Wei, Wang Hongbo,
Zhang Jianfeng, Mao Jian, Ji Houwei, Wu Shouming, Guo Shuwen, Zhao
Haijuan.
Version of standard substituted by this Standard is.
- YC/T 159-2002.
Tobacco and tobacco products - Determination of
water soluble sugars - Continuous flow method
1 Scope
This Standard specifies the method to determine water-soluble sugar (including
water-soluble total sugar and water-soluble reducing sugar) in tobacco and
tobacco products.
This Standard is applicable to the determination of water-soluble sugar in
tobacco and tobacco products. The detection limit of this method is 0.0063%.
quantitation limit is 0.0210%.
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
GB/T 6682, Water for analytical laboratory use - Specification and test
methods
YC/T 31, Tobacco and tobacco products - Preparation of test sample and
determination of water content - Oven method
3 Principle
Use 5% aqueous acetic acid to extract the sample. The sugar in the extract
reacts with p-hydroxybenzoic acid hydrazide. Produce yellow azo compounds
in alkaline media at 85°C.
4 Reagents
Except for special requirements, analytically pure reagents shall be used. The
water shall comply with the regulations for grade one water in GB/T 6682.
4.1 Polyoxyethylene lauryl ether solution (Brij35 solution)
Add 250g of polyoxyethylene lauryl ether to 1L of water. Heat and stir until it is
dissolved.
4.4 Extract (5% acetic acid solution)
Take 50mL of glacial acetic acid. Use water to dilute to 1L, for sample extraction
or preparation of working standard solution.
4.5 Flushing solution (activated 5% acetic acid solution)
Take 1L of 5% acetic acid solution (4.4). Add 0.5mL of Brij35 solution (4.1), for
flushing of continuous flow analyzer pipeline.
4.6 0.2mol/L hydrochloric acid solution
4.7 0.5mol/L hydrochloric acid solution
In the fume hood, slowly add 42mL of fuming hydrochloric acid (mass fraction
is 37%) to 500mL of water. Use water to dilute to 1L.
4.10 5% p-hydroxybenzoic acid hydrazide solution
Add 250mL of 0.5mol/L hydrochloric acid solution (4.7) to a beaker. Add 25g of
paraben hydrazide (4.9) to make it dissolved. Add 10.5g of citric acid (C6H8O7
• H2O). After dissolution, transfer to a 500mL volumetric flask. Use 0.5mol/L
hydrochloric acid solution to dilute to the scale. Store at 0°C~4°C.
4.11 D-glucose, purity ≥99.5%.
4.12 Standard stock solution. Weigh 20.0g of dry D-glucose (4.11) in a beaker,
to the nearest of 0.0001g. Use water to dissolve then transfer into a 500mL
volumetric flask and set volume to the scale. The standard stock solution is
stored in the refrigerator at 0°C~4°C. The validity is 1 month.
4.13 Series standard working solution. Use 5% acetic acid solution (4.4) to
prepare at least 5 standard working solution from stock solution. The
concentration range shall cover the expected sample content. The standard
stock solution is stored in the refrigerator at 0°C~4°C. The validity is 2 weeks.
5 Instruments and materials
5.1 Continuous flow analyzer, consisting of the following parts.
5.2 Balance, with a sensitivity of 0.0001g.
5.3 Oscillator.
5.4 Quantitative filling injector or pipette.
5.5 50mL Erlenmeyer flask with stopper.
5.6 Rapid qualitative filter paper.
6 Analysis steps
6.1 Sample preparation
Prepare sample according to YC/T 31 and measure its moisture content.
6.2 Sample processing
Weigh 0.25g of sample in the 50mL Erlenmeyer flask with stopper (5.5), to the
nearest of 0.0001g. Add 25mL of 5% acetic acid solution (4.4).
6.3 Instrument analysis
Operate the series of standard working solution (4.13) and subsequent filtrate
of sample processing (6.2) on the instrument. See Annex A for the analysis
flowchart. If the sample concentration exceeds the standard working solution
concentration range, it shall be diluted before measurement.
7 Result calculation and expression
7.1 Calculation of water-soluble sugar
The water-soluble sugar content is calculated according to formula (1).
7.2 Result expression
Take the average of two parallel determination results as the measurement
result. If the measured water-soluble sugar content is greater than or equal to
10.0%, the result is to the nearest of 0.1%. If it is less than 10.0%, the result is
to the nearest of 0.01%.
8 Precision and recovery rate
See Table 1 for the precision results of this method.
9 Test report
The test report shall indicate.
Annex A
(informative)
Flow chart of continuous flow analysis of water-soluble sugar
Figure A.1 shows the flow chart of continuous flow analysis of water-soluble
sugars injected at high flow rate. Figure A.2 shows the flow chart of continuous
flow method analysis of water-soluble sugar injection at low flow rate.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of YC/T 159-2019 be delivered?Answer: The full copy PDF of English version of YC/T 159-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of YC/T 159-2019_English with my colleagues?Answer: Yes. The purchased PDF of YC/T 159-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- YC/T 159-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version YC/T 159-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YC/T 159-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of YC/T 159-2019?A step-by-step guide to download PDF of YC/T 159-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "YC/T 159-2019".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|