HOME   Cart(3)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

YB/T 4225-2010 PDF English

US$140.00 · In stock · Download in 9 seconds
YB/T 4225-2010: Method for determination of silicon dioxide content in arenaceous quartz
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] deliveryName of Chinese StandardStatus
YB/T 4225-2010English140 Add to Cart 0-9 seconds. Auto-delivery Method for determination of silicon dioxide content in arenaceous quartz Valid

Excerpted PDFs (Download full copy in 9 seconds upon purchase)

PDF Preview: YB/T 4225-2010
      

Similar standards

GB/T 3518   GB/T 3521   YB/T 5288   

YB/T 4225-2010: Method for determination of silicon dioxide content in arenaceous quartz

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/YBT4225-2010
YB FERROUS METAL INDUSTRY STANDARD ICS 29.050 Q 51 Method for determination of silicon dioxide content in arenaceous quartz Issued on. NOVEMBER 11, 2010 Implemented on. MARCH 01, 2011 Issued by. Ministry of Industry and Information Technology of the People's Republic of China

Table of Contents

Foreword... 3 1 Scope... 4 2 Normative references... 4 3 Principle... 4 4 Instruments... 4 5 Reagents... 5 6 Preparation of samples... 5 7 Test procedures... 5 8 Analysis results... 6 9 Precision... 6 10 Test report... 6

Foreword

This Standard was proposed by China Iron and Steel Industry Association. This Standard shall be under the jurisdiction of Subcommittee on Carbon Materials of National Technical Committee on Steel of Standardization Administration of China. Drafting organizations of this Standard. Fangda Carbon New Material Co., Ltd., Carbon Branch of Datong Energy Development Co., Ltd. of Shanxi Jinneng Group, China Metallurgical Information and Standardization Institute. Main drafters of this Standard. Zhang Guilan, Zhang Xiangjun, Wu Aiyun, Zhu Ting, Zhang Jie. Method for determination of silicon dioxide content in arenaceous quartz

1 Scope

This Standard specifies the principle, instruments, sample requirements, test procedures and test results of the determination of silicon dioxide content in arenaceous quartz. This Standard applies to the determination of silicon dioxide content in arenaceous quartz for carbon production.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 8170 Rules of rounding off for numerical values & expression and judgement of limiting values

3 Principle

The sample is decomposed with hydrofluoric acid and nitric acid. Sulfuric acid emits smoke to drive off silicon and fluorine. The sample is burned to constant weight at high temperature.

4 Instruments

4.1 Balance, with a division of 0.1 mg. 4.2 Platinum crucible, 30 mL. 4.3 Automatic temperature control drying oven.

5 Reagents

5.1 Nitric acid, ρ. 1.40 g/cm3, analytically pure. 5.2 Sulfuric acid (1.3), analytically pure.

6 Preparation of samples

PUT the sample in an oven at (120 °C ± 5 °C) for 2 h to dry; TAKE it out to cool. USE the quarter method to divide 50 g ~ 60 g of the sample.

7 Test procedures

7.1 Sample mass WEIGH 0.5 g of sample, accurate to ±0.001 g. 7.2 Determination 7.2.1 PLACE the sample in a platinum crucible (4.2) that has been made to constant weight in advance; BAKE it at 120°C ± 5°C for 30 min; TAKE it out; COOL it to room temperature in a desiccator; WEIGH it as m1. 7.2.4 Continue to evaporate until the sulfuric acid smoke is exhausted and then take it down. 7.2.5 PLACE the crucible containing the residue in a muffle furnace (4.4) at 850 °C ± 10 °C for 30 min; TAKE it out and COOL it down slightly; PUT it in a desiccator to cool to room temperature; WEIGH it as m2; BURN it again for 15 min and make to constant weight, until the difference in mass between the two weighings is not more than 0.5 mg.

8 Analysis results

8.1 The content of silicon dioxide is calculated as mass fraction SiO2, and the value is expressed in %. It is calculated according to the following formula.

9 Precision

Under the same test conditions, the repeatability r of the test results of parallel samples is shown in Table 1.

10 Test report

The test report includes the following. YB/T 4225-2010 YB FERROUS METAL INDUSTRY STANDARD ICS 29.050 Q 51 Method for determination of silicon dioxide content in arenaceous quartz Issued on. NOVEMBER 11, 2010 Implemented on. MARCH 01, 2011 Issued by. Ministry of Industry and Information Technology of the People's Republic of China

Table of Contents

Foreword... 3 1 Scope... 4 2 Normative references... 4 3 Principle... 4 4 Instruments... 4 5 Reagents... 5 6 Preparation of samples... 5 7 Test procedures... 5 8 Analysis results... 6 9 Precision... 6 10 Test report... 6

Foreword

This Standard was proposed by China Iron and Steel Industry Association. This Standard shall be under the jurisdiction of Subcommittee on Carbon Materials of National Technical Committee on Steel of Standardization Administration of China. Drafting organizations of this Standard. Fangda Carbon New Material Co., Ltd., Carbon Branch of Datong Energy Development Co., Ltd. of Shanxi Jinneng Group, China Metallurgical Information and Standardization Institute. Main drafters of this Standard. Zhang Guilan, Zhang Xiangjun, Wu Aiyun, Zhu Ting, Zhang Jie. Method for determination of silicon dioxide content in arenaceous quartz

1 Scope

This Standard specifies the principle, instruments, sample requirements, test procedures and test results of the determination of silicon dioxide content in arenaceous quartz. This Standard applies to the determination of silicon dioxide content in arenaceous quartz for carbon production.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 8170 Rules of rounding off for numerical values & expression and judgement of limiting values

3 Principle

The sample is decomposed with hydrofluoric acid and nitric acid. Sulfuric acid emits smoke to drive off silicon and fluorine. The sample is burned to constant weight at high temperature.

4 Instruments

4.1 Balance, with a division of 0.1 mg. 4.2 Platinum crucible, 30 mL. 4.3 Automatic temperature control drying oven.

5 Reagents

5.1 Nitric acid, ρ. 1.40 g/cm3, analytically pure. 5.2 Sulfuric acid (1.3), analytically pure.

6 Preparation of samples

PUT the sample in an oven at (120 °C ± 5 °C) for 2 h to dry; TAKE it out to cool. USE the quarter method to divide 50 g ~ 60 g of the sample.

7 Test procedures

7.1 Sample mass WEIGH 0.5 g of sample, accurate to ±0.001 g. 7.2 Determination 7.2.1 PLACE the sample in a platinum crucible (4.2) that has been made to constant weight in advance; BAKE it at 120°C ± 5°C for 30 min; TAKE it out; COOL it to room temperature in a desiccator; WEIGH it as m1. 7.2.4 Continue to evaporate until the sulfuric acid smoke is exhausted and then take it down. 7.2.5 PLACE the crucible containing the residue in a muffle furnace (4.4) at 850 °C ± 10 °C for 30 min; TAKE it out and COOL it down slightly; PUT it in a desiccator to cool to room temperature; WEIGH it as m2; BURN it again for 15 min and make to constant weight, until the difference in mass between the two weighings is not more than 0.5 mg.

8 Analysis results

8.1 The content of silicon dioxide is calculated as mass fraction SiO2, and the value is expressed in %. It is calculated according to the following formula.

9 Precision

Under the same test conditions, the repeatability r of the test results of parallel samples is shown in Table 1.

10 Test report

The test report includes the following. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.


      

Tips & Frequently Asked Questions

Question 1: How long will the true-PDF of English version of YB/T 4225-2010 be delivered?

Answer: The full copy PDF of English version of YB/T 4225-2010 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of YB/T 4225-2010_English with my colleagues?

Answer: Yes. The purchased PDF of YB/T 4225-2010_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. www.ChineseStandard.us -- YB/T 4225-2010 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of YB/T 4225-2010?

A step-by-step guide to download PDF of YB/T 4225-2010_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "YB/T 4225-2010".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9