TB/T 449-2016 PDF English
US$330.00 · In stock · Download in 9 secondsTB/T 449-2016: Wheel profile for locomotive and car Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid TB/T 449: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| TB/T 449-2016 | English | 330 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Wheel profile for locomotive and car
| Valid |
| TB/T 449-2003 | English | 479 |
Add to Cart
|
3 days
|
Wheel profile for locomotive and car
| Obsolete |
| TB/T 449-1976 | English | 199 |
Add to Cart
|
2 days
|
(Locomotive vehicle wheel rim Tread Profile)
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: TB/T 449-2016
TB/T 449-2016: Wheel profile for locomotive and car---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/TBT449-2016
TB
RAILWAY INDUSTRY STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 45.060.20
S 33
Replacing TB/T 449-2003
Wheel profile for locomotive and car
ISSUED ON: MAY 26, 2016
IMPLEMENTED ON: DECEMBER 01, 2016
Issued by: National Railway Administration.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Types and contours ... 4
Appendix A (Normative) Point coordinates of tread contour parts ... 12
Appendix B (Informative) Drawing method of rim tread contour ... 14
Appendix C (Informative) Comparison table of old and new names of CN type, XP55
type, LMD type rim treads ... 21
Wheel profile for locomotive and car
1 Scope
This standard specifies the type and profile of wheel rim tread profiles for railway
rolling stock.
This standard applies to machined rolling stock wheels.
2 Types and contours
2.1 There are 8 types of rolling stock wheel rim tread shape prototypes, the models of
which are: LM, LMA, LMB, LMC, LMD, JM, JM2, JM3. The contours are as shown in
Figures 1 ~ 8, respectively.
2.2 There are 25 types of thin rim tread shapes for rolling stock maintenance, including
9 types of LM thin rim treads and 16 types of JM thin rim treads, see Table 1.
2.3 See Appendix A for the point coordinates of the tread contours of LMB type and
LMC type.
2.4 See Appendix B for the drawing method of rim tread contour.
2.5 See Appendix C for the comparison table between the old and new names of CN
type, XP55 type, LMD type rim treads.
Appendix B
(Informative)
Drawing method of rim tread contour
B.1 General
The drawing method of rim tread contour is divided into the tread contour drawing
method and the rim contour drawing method.
See Figure B.1, for the schematic outline of the LMA type rim tread.
See Figure B.2, for a schematic outline of the LMB type rim tread.
See Figure B.3, for a schematic outline of the LMC type rim tread.
See Figure B.4, for a schematic outline of the LMD type rim tread.
See Figure B.5, for a schematic outline of the rim tread of LM-28 type, LM-27.5 type,
LM-27 type, LM-26 type.
See Figure B.6, for a schematic outline of LM-31.5 type, LM-31 type, LM-30 type,
LM-29.5 type, LM-29 type, LM type, JM type, JM2 type, JM2 thin rim, JM3 type, JM3
thin rim tread.
B.2 Drawing benchmark
Take OX, OY as the coordinate axis, axis X as the tread baseline. The symbol markings
are as shown in Figure B.1 ~ Figure B.6, respectively, according to different rim tread
models.
B.3 Method for drawing tread contour curve
B.3.1 The specific drawing method of LMA type tread curve is as follows:
a) Taking point O as the center and R7 as the radius, draw an arc aa', which intersects
the straight line x = L3 on the right side of the Y axis, at point O7;
b) Taking point O7 as the center and R7 - R6 as the radius, draw an arc bb', which
intersects the straight line x = L2 on the left side of the Y axis, at point O6;
c) Taking point O6 as the center and R6 - R5 as the radius, draw an arc cc’;
d) Taking point F (-70 + B1, H1) as the center of the circle and R5 as the radius, draw
arc dd’. dd’ and cc’ intersect at point O5;
e) Taking point O5 as the center and R5 as the radius, draw a straight line gg', that
forms an angle of -70° with the X-axis and is tangent to the circle;
f) Taking point O6 as the center and R6 as the radius, draw a circle;
g) Taking point O7 as the center and R7 as the radius, draw a straight line segment
I’I, which has a slope of -1:40 and is tangent to the circle. The tangent point is I’;
the abscissa of point I is x = L4;
h) Draw a straight line segment IM, which has a slope of -1:15 through point I (the
length of IM is determined by the rim width);
i) Make MN straight segment, where MN is a 5×5 chamfer.
B.3.2 The specific drawing method of LMB type tread curve is as follows:
a) Make a curve segment G-H-I, from the point coordinates of the tread contour;
b) Using point F (-70 + B1, H1) as the center and R5 as the radius, draw arc dd’. Using
point G as the center and R5 as radius, draw arc ee’. dd’ and ee’ intersect at point
O5;
c) Taking point O5 as the center and R5 as the radius, draw a circle. Draw a straight
line gg', that forms an angle of -70° with the X-axis and is tangent to the circle;
d) Draw a straight line segment IM, which has a slope of -1:15, through point I (the
length of IM is determined by the rim width);
e) Make MN straight segment, where MN is a 5×5 chamfer.
B.3.3 The specific drawing method of LMC type tread curve is as follows:
a) Create a curve segment G-O, from the point coordinates of the tread contour;
b) Taking point F (-70 + B1, H1) as the center and R5 as the radius, draw arc dd'.
Using point G as the center and R5 as radius, draw arc ee'. dd' and ee' intersect at
point O5;
c) Taking point O5 as the center and R5 as the radius, draw a circle. Meanwhile, make
a straight line gg', that forms an angle of -68°40' with the X-axis and is tangent to
the circle;
d) Draw a straight line segment OI, which has a slope of -5.5:100 through point O;
the abscissa of point I is x = L4;
e) Draw a straight line segment IM, which has a slope of -15:100 through point I (the
length of IM is determined by the rim width);
g) Taking point O7 as the center and R7 + R8 as the radius, draw an arc ff’, that
intersects the straight line x = L4 on the right side of the Y-axis, at point O8;
h) Taking point O8 as the center and R8 as the radius, draw a circle. Make a straight
line segment IM, which has a slope of -1:P (the length of IM is determined by the
rim width), and is tangent to the circle;
i) Make MN straight segment, where MN is a 5×5 chamfer.
B.4 Drawing method of rim profile curve
B.4.1 For the LMA type, LMB type, LMC type, LMD type, LM type, LM-31.5 type, LM-
31 type, LM-30 type, LM-29.5 type, LM-29 type, JM type, JM2 type, JM2 thin rim, JM3
type, JM3 thin rim, the specific drawing method of rim contour is as follows:
a) Taking point O2 (-70 + L1, H - R2) as the center and R2 as the radius, draw a circle;
b) Draw a straight line at x = -70. Taking R1 as the radius, draw a circle, which is
tangent to the straight line at x = -70 and circle O2;
c) Taking R4 as the radius, draw a circle, which is tangent to the circle O2 and the
straight line gg'.
B.4.2 The specific drawing methods of rim shapes of LM-28 type, LM-27.5 type, LM-
27 type, LM-26 type are as follows:
a) Taking point O2 (-70 + L1, H - R2) as the center and R2 as the radius, draw a circle;
b) Draw a straight line of x = -70. Taking R1 as the radius, draw a circle, which is
tangent to the straight line of x = -70 and the circle O2;
c) Taking point O3 (-70 + L1, H - R3) as the center and R3 as the radius, draw a circle;
d) Taking point R4 as the radius, draw a circle, which is tangent to the circle O3 and
the straight line gg'.
B.5 Trimming of rim tread curve
Cut each circle and straight line, to obtain the contour of the corresponding rim tread
shape. The tangent (intersection) points are A, B, C, (C'), D, E, G, (H), O, (I'), I, M, N,
(P).
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of TB/T 449-2016 be delivered?Answer: The full copy PDF of English version of TB/T 449-2016 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of TB/T 449-2016_English with my colleagues?Answer: Yes. The purchased PDF of TB/T 449-2016_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- TB/T 449-2016 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version TB/T 449-2016?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version TB/T 449-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of TB/T 449-2016?A step-by-step guide to download PDF of TB/T 449-2016_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "TB/T 449-2016".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|