Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 169759 (Nov 28, 2021)
HOME   Quotation   Tax   Examples Standard-List   Contact-Us   Cart
  

SJ/T 11363-2006 (SJ/T11363-2006)

Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardSee DetailStatusRelated Standard
SJ/T 11363-2006English70 Add to Cart 0--10 minutes. Auto-delivery. Requirements for concentration limits for certain hazardous substances in electronic information products SJ/T 11363-2006 Valid SJ/T 11363-2006


SJ/T 11363-2006: PDF in English (SJT 11363-2006)
SJ/T 11363-2006
SJ
ELECTRONIC INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 31.020
L10
Registration number.
Requirements for concentration limits for certain
hazardous substances in electronic information products
ISSUED ON. NOVEMBER 06, 2006
IMPLEMENTED ON. NOVEMBER 06, 2006
Issued by. Ministry of Industry and Information Technology of PRC
3. No action is required - Full-copy of this standard will be automatically &
immediately delivered to your EMAIL address in 0~60 minutes.
Table of Contents
Foreword ... 3 
Introduction ... 4 
1 Scope ... 5 
2 Normative references ... 5 
3 Terms and definitions ... 5 
4 Requirements ... 7 
5 Rules of detection ... 8 
6 Qualification judgement ... 8 
Appendix A (Informative) Participating drafting organizations of this standard 9 
Introduction
Currently many electronic information products still contain a large amount of
toxic and hazardous substances or elements such as lead, mercury, cadmium,
hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl
ethers, and so on, due to function and production technology requirements.
These electronic information products containing aforementioned toxic and
hazardous substances or elements will, if not disposed appropriately after
being discarded, not only cause environment pollution but also cause waste of
resource. Therefore, the electronic information product pollution control work
mainly for the purposes of reduction and substitution of hazardous substance
or element had been included into the agenda of the government
administrative departments.
To realize the objectives of resource conservation and environment protection,
the seven ministries of the State Council including the Ministry of Industry and
Information Technology of PRC followed the principles of “controlling from the
source and legislation in advance” AND established the Electronic information
product pollution control management method (Order No.39 of the Ministry of
Industry and Information Technology of PRC), which prompts the electronic
information product pollution control work through legislation, in order to limit or
prohibit the use of the aforementioned six types of toxic and hazardous
substances or elements from such links as the R&D, design, production, sale,
and import of the electronic information products.
To coordinate the implementation of Electronic information product pollution
control management method, this standard is hereby established. In this
standard, it considers the requirements of controlling the toxic and hazardous
substances or elements pollution from the source of the electronic information
products manufacturers and importers, the feasibility of the supervisory
institute to implement supervision or test, and the requirements for adapting to
relevant international standards, combines the current industry situation and
the economic & technical feasibility, AND establishes the reasonable limit
value indicators to limit the use of toxic and hazardous substances.
Requirements for concentration limits for certain
hazardous substances in electronic information products
1 Scope
This standard specifies the maximum allowable concentration of the toxic and
hazardous substances which are contained in the electronic information
products.
This standard is applicable to the electronic information products which are
covered in the pollution control key management catalogue as specified in the
Electronic information product pollution control management method.
2 Normative references
The provisions in following documents become the provisions of this Standard
through reference in this Standard. For the dated references, the subsequent
amendments (excluding corrections) or revisions do not apply to this Standard;
however, parties who reach an agreement based on this Standard are
encouraged to study if the latest versions of these documents are applicable.
For undated references, the latest edition of the referenced document applies.
SJ/T 11365-2006 Testing methods for hazardous substances in electronic
information products
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Substance
It refers to the elementary substance or compound which is existed in
nature AND is composed of chemical elements.
3.2
Hazardous substance
HS
It refers to the lead, mercury, cadmium, hexavalent chromium,
polybrominated biphenyls (PBB), and polybrominated diphenyl ethers
(PBDE, excluding decabromodiphenyl ether) as contained in the electronic
information products.
3.3
Electronic information products
EIP
It refers to the such products as electronic radar products, electronic
communications products, radio and television products, computer products,
household electronic products, electronic measuring instruments products,
electronic special products, electronic components products, electronic
applications, electronic materials products, and their accessories which are
manufactured through the electronic information technology.
3.4
Producer
It refers to the natural person or legal person that engages into the
electronic information product production in the territory of People’s
Republic of China.
3.5
Importer
It refers to the natural person or legal person that engages into the
electronic information product import in the territory of People’s Republic of
China.
3.6
Materials
It refers to a substance OR the mixture of several substances, such as
metals (plating, solder alloy, brass), plastics (ABS, nylon, PVC), and
ceramic (dielectric material), etc.
3.7
Homogeneous materials
It refers to the material homogeneous in each part which is composed of
one or more substances.
3.8
Adding (HS) intentionally
The producer or importer intentionally uses toxic and hazardous substances
to make its product reach to a certain performance indicator, AND it will be
......
 
(Above excerpt was released on 2017-09-15, modified on 2021-06-07, translated/reviewed by: Wayne Zheng et al.)
Source: https://www.chinesestandard.net/PDF.aspx/SJT11363-2006