QC/T 29106-2014 PDF in English
QC/T 29106-2014 (QC/T29106-2014, QCT 29106-2014, QCT29106-2014)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| QC/T 29106-2014 | English | 125 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Technical specification of automobile wire harness
| Valid |
| QC/T 29106-2004 | English | 799 |
Add to Cart
|
5 days
|
Technical specification of low-voltage electric harness for motor vehicles
| Obsolete |
| QC/T 29106-1992 | English | 399 |
Add to Cart
|
3 days
|
(Low automotive wiring harness technical conditions)
| Obsolete |
Standards related to (historical): QC/T 29106-2014
PDF Preview
QC/T 29106-2014: PDF in English (QCT 29106-2014) QC/T 29106-2014
ICS 43.040.10
E 36
QC
Automobile Industry Standard
of the People’s Republic of China
Replacing QC/T 29106-2014
Technical Specification of
Automobile Wire Harness
ISSUED ON. MAY 06, 2014
IMPLEMENTED ON. OCTOBER 1, 2014
Issued by. Ministry of Industry and Information Technology of the
People's Republic of China
Ministry of Industry and Information Technology
of the People's Republic of China
Announcement
No. 32 of 2014
The Ministry of Industry and Information Technology has approved 1208 industry
standards including “The Self-adhesive Label Printing Machine”, etc. (see Annex 1 for
standard numbers, names, main content and initial implementation dates), including
471 mechanical industry standards, 32 automobile industry standards, 70 ship industry
standards, 111 aviation industry standards, 137 chemical industry standards, 69
metallurgy industry standards, 30 building materials industry standards, 14
petrochemical industry standards, 6 non-ferrous metal industry standards, 89 light
industry standards, 49 textile industry standards, 79 ordnance industry and civilian
products industry standards, 15 nuclear industry standards, 2 electronics industry
standards and 34 communications industry standards. 39 metallurgical industry
standard samples including “Manganese Silicon Alloy (FeMn68Si16)” have approved
(see Annex 2 for the standard sample list and composition content).
The above mechanical industry standards were published by China Machine Press;
the automobile industry standards, the chemical industry standards and the non-
ferrous metal industry standards were published by China Planning Press; the ship
industry standards were organized and published by China Institute of Marine
Technology & Economy; the aviation industry standards were organized and published
by China Institute of Aviation; the chemical industry standards were published by
Chemical Industry Press; the metallurgical industry standards were published by
Metallurgical Industry Press; the building materials industry standards were published
by Building Materials Press; the petrochemical industry standards were published by
China Petrochemical Press; the light industry standards were published by China Light
Industry Press; the textile industry standards were published by China Standards
Press; the standards of the ordnance and civilian products industry were organized
and published by Chinese Ordnance Industry Standardization Institute; the nuclear
industry standards were organized and published by the Nuclear Industry
Standardization Institute; the electronics industry standards were published by the
Electronics Industry Standardization Institute of the Ministry of Industry and Information
Technology; the communications industry standards were published by the People's
Posts and Telecom Press and the communications engineering construction industry
Annex.
Numbers, standard names and initial implementation dates of 32 automotive
industry standards
S/N Standard No. Standard name
Standard
No. replaced
Initial
implementation
date
1 QC/T 231-2014
Specification of Kick-Starter for
Motorcycles and Mopeds
QC/T 231-
1997 10/01/2014
2 QC/T 233-2014
Performance and Measurement Method
for Static Intensity of Motorcycles and
Mopeds
QC/T 233-
1997 10/01/2014
3 QC/T 66-2014 Wet Clutch for Moped and Motorcycle
QC/T 66-
1993 10/01/2014
4 QC/T 962-2014
Technical Specifications of Paint Layer of
Motorcycles and Mopeds 10/01/2014
5 QC/T 680-2014
General Technical Specifications for
Voltage Regulators for Motorcycles And
Mopeds
QC/T 680-
2002 10/01/2014
6 QC/T 963-2014
Drum Brake of Motorcycles and Mopeds
Wheels 10/01/2014
7 QC/T 234-2014
Technical Specifications of Steering
Bearing for Motorcycles and Mopeds
QC/T 234-
1997 10/01/2014
8 QC/T 964-2014
The Strength of the Plastic Seats and
Their Anchorages for City Buses 10/01/2014
9 QC/T 644-2014
Specifications for Automobile Metal Fuel
Tank
QC/T 644-
2000, QC/T
488-2000
10 QC/T 965-2014
Driver of Electric Rear-View Mirrors for
Motor Vehicle 10/01/2014
11 QC/T 966-2014
Coating Technical Conditions for
Automobile Plastic Parts 10/01/2014
12 QC/T 459-2014 Truck with Loading Crane
QC/T 459-
2004 10/01/2014
13 QC/T 29106-2014
Technical Specification of Automobile
Wire Harness
QC/T 29106-
2004 10/01/2014
14 QC/T 198-2014
General Technical Specification for
Automobile Switch
QC/T 198-
1995 10/01/2014
15 QC/T 220-2014
Technical Specifications for Automobile
Fusible Links
QC/T 220-
1996 10/01/2014
16 QC/T 967-2014 Port Fuel Injector for Gasoline Engine 10/01/2014
17 QC/T 968-2014
Determination Methods of Platinum,
Palladium and Rhodium Contents in
Metallic Catalytic Converters
18 QC/T 969-2014
Interior Trunk Release for Compartment
of a Passenger Car 10/01/2014
19 QC/T 636-2014
Electric Window Regulator Specification
for Vehicles
QC/T 636-
2000 10/01/2014
20 QC/T 970-2014
Passenger Car Air Filter Technical
Specification 10/01/2014
21 QC/T 971-2014
Specifications of Air filter Element for
Motorcycles and Scooters 10/01/2014
22 QC/T 972-2014
Technical Requirements and Test Method
for Motor Vehicle-Electronically Controlled
Hydraulic Power Steering Gear
23 QC/T 299.1-2014
Automobile hydraulic steering power
pump - Part 1. Technical Requirements
QC/T 299-
2000 10/01/2014
24 QC/T 299.2-2014
Automobile Hydraulic Steering Power
Pump - Part 2. Test Method
QC/T 299-
2000 10/01/2014
25 QC/T 563-2014
Performance and Test Methods for
Automobile Steering Wheel
QC/T 563-
1999 10/01/2014
26 QC/T 29097-2014
The Technical Specifications of
Automobile Steering Gear
QC/T 29097-
1992 10/01/2014
27 QC/T 29096-2014
The Bench Test Methods of Automobile
Steering Gear
QC/T 29096-
1992 10/01/2014
28 QC/T 303-2014
Technical Requirements and Test
Methods for Motor Vehicles Oil Reservoir
QC/T 303-
1999 10/01/2014
29 QC/T 301-2014
Technical Requirements and Test
Methods for Motor Vehicles Power
Cylinder
QC/T 301-
1999, QC/T
302-1999
30 QC/T 70-2014
Measurement Method of Acoustic Noise
for Engines of Motorcycles and Mopeds
QC/T 70-
1993 10/01/2014
Table of Contents
Foreword ... 8
1 Scope ... 10
2 Normative References ... 10
3 Terms and Definitions ... 12
4 Requirements ... 13
5 Test Method ... 25
6 Inspection Rules ... 33
7 Marking, Packaging, Storage and Custody ... 35
Annex A (Normative) Requirements for the Cross-section of Crimping Area and
Crimping Juncture of Terminals and Wire Conductors ... 37
Annex B (Normative) Heat-shrinkable Double-wall Tubes for Automobile Wire
Harnesses ... 39
Annex C (Normative) Pressure-sensitive Adhesive Tapes for Automobile Wire
Harnesses ... 42
Annex D (Normative) Bellows for Automobile Wire Harnesses ... 44
Foreword
This Standard is drafted in accordance with the rules given in GB/T 1.1-2009
“Standardization Work Guidelines - Part 1. Structure and Preparation of Standards”.
This Standard is the revision of QC/T 29106-2004. Compared with QC/T 29106-2004,
main changes are as follows.
- Normative References (Clause 2) is added with GB 8410, GB 11122, GB 19147,
GB/T 2423.1-2008, GB/T 2423.2-2008, GB/T 2423.17-2008, GB/T 2423.22 -
2002, GB/T 28046.3-2011, SJ/T 11363 and NB/SH/T 0521.
- Terms and Definitions (Clause 3) is added with the definitions of “housing”,
“protection sleeve” and “clip”.
- ADD the limit deviation requirements for the dimensions "between clips" (Table 1
in 4.3).
- ADD the commonly used tape binding method and rules of three kinds of wire
(4.2.7).
- ADD water resistance requirements for the installation of rubber parts (4.6).
- ADD the requirements for the minimum tension and the voltage drop of the
conductor crimp zone of wires with specifications of 0.22 mm2, 0.35 mm2, 3.0
mm2, 3.0 mm2, 5.0 mm2, etc. (Table 2 and Table 3).
- CANCEL the definition of puncture connection (3.8 of the original edition) and the
corresponding clauses (4.4.6 of the original edition).
- SPECIFY sub-items for the crimp junctions and add the corresponding
requirements (4.4).
- SPECIFY the voltage drop test measuring points and the voltage drop calculation
method and add the determination method of temperature balance during the
test procedure (5.4.6 and 5.5.3).
- MODIFY the chemical resistance test method and test parameters (5.16 of the
original edition and 5.14 of this edition).
- MODIFY partly the normative Annex A, Requirements for Cross-section of Crimp
and Crimp Junctions for Terminals and Wire Conductors.
Automobile Wire Harness - Technical Requirements
1 Scope
This Standard specifies the requirements, test methods, inspection rules, marking,
packaging, storage and custody of automobile wire harne...
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|