Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 169760 (Sep 18, 2021)
HOME   Quotation   Tax   Examples Standard-List   Contact-Us   Cart
  

QC/T 1060-2017 (QC/T1060-2017)

Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardSee DetailStatusRelated Standard
QC/T 1060-2017English145 Add to Cart 0--10 minutes. Auto-delivery. Hexalobular bolts with flange for automobile QC/T 1060-2017 Valid QC/T 1060-2017


QC/T 1060-2017: PDF in English (QCT 1060-2017)
QC/T 1060-2017
AUTOMOBILE INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 43.160
T 31
Hexalobular Bolts with Flange for Automobile
ISSUED ON: JANUARY 09, 2017
IMPLEMENTED ON: JULY 01, 2017
Issued by: Ministry of Industry and Information Technology of PRC
Table of Contents
Announcement ... 3
Foreword ... 9
1 Scope ... 10
2 Normative References ... 10
3 Type and Dimension ... 11
4 Technical Conditions ... 16
5 Product Number ... 17
262 QC/T 1059-2017
Automobile cab
torsion bar type flip
and lock mechanism
2017-07-01
263 QC/T 32-2017
Test methods of air
cleaners for
automobiles
QC/T 32-2006 2017-07-01
264 QC/T 597.1-2017
Threaded fasteners -
Pre - coated adhesive
- Technical
requirements - Part 1:
Microcapsule locking
layer
QC/T 597-2017 2017-07-01
265 QC/T 597.2-2017
Threaded fasteners -
Pre - coated adhesive
- Technical
requirements - Part 2:
Polyamide locking
layers
2017-07-01
266 QC/T 1-2017
Basic requirements
for automobile
products drawing
QC/T 1-1992 2017-07-01
267 QC/T 2-2017 Drawing format of automobiles QC/T 2-1992 2017-07-01
268 QC/T 3-2017
Completeness of
drawings and design
documents about
automobiles
QC/T 3-1992 2017-07-01
269 QC/T 4-2017
Method for change
about product
drawing and design
document regulations
of automobile
QC/T 4-1992 2017-07-01
270 QC/T 5-2017
Standardization
examination for
automobile product
drawings and design
documents
QC/T 5-1992 2017-07-01
271 QC/T 18-2017
Automobile products
drawing and design
documents - Terms
QC/T 18-1992 2017-07-01
272 QC/T 340-2017
Hexagon flange
bearing surface with
tooth bolt
QC/T 340-1999 2017-07-01
283 QC/T 1067.1-2017
Road Vehicles -
Connections for On-
board Electrical
Wiring Harnesses -
Part 1: Definitions,
Test Methods and
General Performance
Requirements (the
Automobile Part)
QC/T 417.1-
2001 2017-07-01
284 QC/T 1067.2-2017
Automotive
connectors for
electrical harnesses
and electrical
equipment - Part 2:
Types and
dimensions of plug
terminals
QC/T 417.3-
2001
QC/T 417.4-
2001
QC/T 417.5-
2001
2017-07-01
285 QC/T 1067.3-2017
Automotive
connectors for
electrical harnesses
and electrical
equipment - Part 3:
Wire connector type,
size and special
requirements
QCn 29010-
1991
QCn 29011-
1991
QCn 29013-
1991
2017-07-01
286 QC/T 1068-2017
Asynchronous drive
motor system for
electric vehicles
2017-07-01
287 QC/T 1069-2017
Permanent magnet
synchronous drive
motor system for
electric vehicles
2017-07-01
288 QC/T 1070-2017
Technical
specifications of
automobile parts
remanufactured
products
2017-07-01
289 QC/T 1071-2017
Test method for
steady state flow
characteristics of
automotive engine
cylinder head airways
2017-07-01
Hexalobular Bolts with Flange for Automobile
1 Scope
This Standard specifies the hexalobular bolts with flange for automobile with thread
specification of M5~M20, performance level of Level-8.8 and Level-10.9, the product
grade of Grade-A and Grade-B. Grade-A is used for bolt with l≤10d or l≤150mm (as
per whichever is smaller); while Grade-B is used for bolt with l>10d or l>150mm (as
per whichever is smaller).
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this document.
GB/T 2 Fasteners – Ends of Parts with External Thread
GB/T 90.1 Fasteners – Acceptance Inspection
GB/T 90.2 Fasteners – Marking and Packaging
GB/T 193 General Purpose Screw Threads – Diameters and Pitches
GB/T 3098.1 Mechanical Properties of Fasteners - Bolts, Screws and Studs
GB/T 3103.1 Tolerances for Fasteners – Bolts, Screws, Studs and Nuts
GB/T 5779.1 Fasteners - Surface Discontinuities - Bolts, Screws and Studs for
General Requirements
GB/T 9145 General Purpose Metric Screw Threads - Limits of Sizes for the Screw
Threads of Medium Quality and Preferable Plan
QC/T 326 Coding Rules for Automotive Standardized Parts
QC/T 625 Metallic Coatings and Conversion Coatings for Automobiles
QC/T 6189 Hexalobular Type-E for Fasteners
......
 
(Above excerpt was released on 2019-11-02, modified on 2021-06-07, translated/reviewed by: Wayne Zheng et al.)
Source: https://www.chinesestandard.net/PDF.aspx/QCT1060-2017