Q/BQB 484-2023 (Q/BQB 484-2019) PDF English
US$170.00 · In stock · Download in 9 secondsQ/BQB 484-2019: Cold Rolling Steel Plate and Strip for Magnetic Pole of Hydraulic Generator Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureQ/BQB 484: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| Q/BQB 484-2023 | English | 319 |
Add to Cart
|
3 days
|
Cold-rolled steel sheet and strip for magnetic pole of water-wheel electric generator use
| |
| Q/BQB 484-2019 | English | 170 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Cold Rolling Steel Plate and Strip for Magnetic Pole of Hydraulic Generator
| |
| Q/BQB 484-2018 | English | 110 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Cold Rolling Steel Plate and Strip for Magnetic Pole of Hydraulic Generator
| Obsolete |
| Q/BQB 484-2009 | English | 199 |
Add to Cart
|
2 days
|
Magnetic yoke for magnetic generator, steel plate for magnetic pole and steel strip
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: Q/BQB 484-2019
Q/BQB 484-2019: Cold Rolling Steel Plate and Strip for Magnetic Pole of Hydraulic Generator---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/QBQB484-2019
ENTERPRISE STANDARD OF
BAOSHAN IRON AND STEEL CO., LTD
Replacing Q/BQB 484-2018
Cold-Rolled Steel Sheet and Strip for Magnetic-Pole of
Water-Wheel Electric Generator Use
Issued on: FEBRUARY 02, 2019
Implemented on: APRIL 10, 2019
Issued by. Baoshan Iron and Steel Co., Ltd.
Table of Contents
Foreword... 3
1 Compositions... 4
2 Mechanical Properties... 4
3 Inspection and Test... 5
4 Appendix... 6
Foreword
This Standard was drafted as per the rules specified in GB/T 1.1-2009 Directives for
Standardization – Part 1.Structure and Drafting of Standards.
This Standard was formulated by reference by IEC 60404-8-5.1989.
This Standard replaced Q/BQB 484-2018.
Compared with Q/BQB 484-2018, this Standard made the following content
modifications as follows.
--- Supplement the national standard reference documents related to the
compositions;
--- Supplement the information required for ordering;
--- Add Designation B550TF179 and its corresponding technical requirements;
--- Adjust the lower limit of supply thickness in Table 2 from 0.8mm to 0.7mm;
--- Supplement the control requirements for chemical compositions in Table 3;
--- Add Appendix A Comparison List of Similar Designations.
This Standard’s Appendix A is informative.
This Standard was proposed by Manufacture and Management Department of
Baoshan Iron and Steel Co., Ltd.
This Standard shall be under the jurisdiction of Manufacture and Management
Department of Baoshan Iron and Steel Co., Ltd.
Drafting organization of this Standard. Manufacture and Management Department of
Baoshan Iron and Steel Co., Ltd.
Modifying and drafting staffs of this Standard. Yuan Min, Liu Peican.
The historical editions replaced by this Standard are as follows. Q/BQB 484-2009,
Q/BQB 484-2014, Q/BQB 484-2015, Q/BQB 484-2018.
Cold-Rolled Steel Sheet and Strip for Magnetic-pole of
Water-Wheel Electric Generator Use
1 Compositions
Table 3
2 Mechanical Properties
Designation Chemical composition (smelting analysis) % (mass fraction)
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
|