JC/T 897-2014 PDF English
US$135.00 · In stock · Download in 9 secondsJC/T 897-2014: Antiseptic function of antibacterial ceramic Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid JC/T 897: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| JC/T 897-2014 | English | 135 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Antiseptic function of antibacterial ceramic
| Valid |
| JC/T 897-2002 | English | 319 |
Add to Cart
|
3 days
|
Antiseptic function of antibacterial ceramic
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: JC/T 897-2014
JC/T 897-2014: Antiseptic function of antibacterial ceramic---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/JCT897-2014
JC
ICS 91.100.25
Q 30
Filing No.. 48690-2015
Building Material Industry Standard
of the People’s Republic of China
Replacing JC/T 897-2002
Antiseptic function of antibacterial ceramic
(ISO 22196.2011, Measurement of antibacterial activity on plastics
and other non-porous surfaces, MOD)
Issued on. DECEMBER 24, 2014
Implemented on. JUNE 1, 2015
Issued by. Ministry of Industry and Information Technology of the
People’s Republic of China.
Table of Contents
Foreword... 3
1 Scope... 5
2 Normative references... 5
3 Terms and definitions... 5
4 Product marks... 6
5 General requirements... 6
6 Technical requirements... 6
7 Test methods... 6
8 Inspection rules... 7
Appendix A... 9
Foreword
This Standard is drafted according to the rules given in the GB/T 1.1-2009.
This Standard replaces the JC/T 897-2002 Antiseptic function of antibacterial
ceramic. Compared with the JC/T 897-2002, besides the editorial changes, the
major technical changes are as follows.
— ADD the “Normative references” (SEE Chapter 2 of this edition);
— DELETE the “Product categories” (SEE Chapter 3 of 2002 edition);
— ADD the “Product marks” (SEE Chapter 4 of this edition);
— ADD the “General requirements” (SEE Chapter 5 of this edition);
— ADD the technical requirements and experimental methods for the
permanence of antibacterial (SEE Section 7.3 of Chapter 6 of this edition);
— MODIFY the definitions of “antibacterial” and “antibacterial ceramic” (SEE
Sections 3.1 and 3.3 of this edition);
— ADD the “Antibacterial test conditions” (SEE Section 7.1 of this edition);
— MODIFY the detailed provisions on the methods of antibacterial
performance test (SEE Appendix A of this edition; Appendix A of 2002
edition).
Appendix A of this Standard modifies-adopts ISO 22196.2011 Measurement of
antibacterial activity on plastics and other non-porous surfaces.
According to the conditions of microbiological experiments in our country, this
Standard makes some modifications when adopting ISO 22196.2011.The
relevant technical differences have already been compiled into the Appendix A.
The existing major differences are as follows.
— This Standard deletes the “8.3 Calculation of the antibacterial activity” of
ISO 22196.2011, and changes it into “A.4.2 Calculation of the
antibacterial rate”, which is to consider using the common methods for
representing the antiseptic function of our country’s existing products;
— This Standard deletes the Appendixes A and B of ISO 22196.2011;
— This Standard makes some editorial changes to ISO 22196.2011
according to the requirements of national standards.
This Standard was proposed by China Building Materials Association.
This Standard shall be under the jurisdiction of the Technical Committee for
Standardization of Environment-friendly and Healthy Building Materials in the
Building Materials Industry.
Drafting organizations of this Standard. China Building Materials Academy,
Shenzhen Grandland Decoration Group Co., Ltd, Fujian Jomoo Group Co., Ltd,
Guangdong Institute of Microbiology, Technical Institute of Physics and
Chemistry, CAS, Microban (China) Co., Ltd, and Antibacterial Industry Branch
of National Association of Health Industry and Enterprise Management.
Main drafters of this Standard. Wang Jing, Ji Zhijiang, Li Shaoqiang, Zhao
Chunyan, Lin Xiaofa, Xie Xiaobao, Zheng Sujiang, Wang Xiaoyan, Tang
Zhongzhi, Xie Xiaojun, Hou Guoyan, and Zhang Yingzeng.
This Standard is issued for first-time.
Antiseptic function of antibacterial ceramic
1 Scope
This Standard specifies the terms and definitions, product marks, general
requirements, technical requirements, test methods, and inspection rules of
antibacterial ceramic.
2 Normative references
The following documents are essential to the application of this document. For
dated references, only the versions with the dates indicated are applicable to
this document. For undated references, only the latest versions (including all
the amendments) are applicable to this document.
GB 4789.2 National food safety standards – Food microbiological
examination. Aerobic plate count
3 Terms and definitions
The following terms and definitions apply to this document.
It refers to the generic terms of inhibiting and killing the growth and proliferation
of bacteria, saccharomycetes, moulds, and other microorganisms.
It refers to the ceramic with antiseptic function on the surface.
4 Product marks
MARK the antibacterial ceramic according to the sequence of product name,
standard number, symbols of the antiseptic function, antibacterial rate of the
antiseptic function, and antibacterial rate of the permanence of antibacterial.
5 General requirements
The basic performance of the antibacterial ceramic shall conform to the
provisions on the corresponding category of products specified in the national
or industry standards.
6 Technical requirements
The antiseptic function and permanence of antibacterial of antibacterial ceramic
shall conform to the provisions specified in Table 1.
7 Test methods
SIMULATE the cleaning ways of the products during use. USE sodium
hypochlorite disinfectant to repeatedly scrub the surfaces of test samples.
DETECT the antiseptic function of the surfaces of test samples after scrubbing.
8 Inspection rules
CONDUCT group-batching according to the group-batching methods specified
in the relevant product standards.
USE one-time sampling scheme for the detection of antiseptic function and
permanence of antibacterial. TAKE six samples at random from a batch of
products submitted for inspection as test specimens.
Appendix A
(Informative)
Antiseptic function test method
USE the film adhering method to let the bacteria uniformly contact with the test
specimens via the quantitative inoculation of bacteria on the test specimens to
be detected. After a certain time, DETECT the viable count on the test
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of JC/T 897-2014 be delivered?Answer: The full copy PDF of English version of JC/T 897-2014 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of JC/T 897-2014_English with my colleagues?Answer: Yes. The purchased PDF of JC/T 897-2014_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- JC/T 897-2014 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version JC/T 897-2014?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JC/T 897-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of JC/T 897-2014?A step-by-step guide to download PDF of JC/T 897-2014_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "JC/T 897-2014".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|