JB/T 12554-2016 PDF English
US$165.00 · In stock · Download in 9 secondsJB/T 12554-2016: The test method of energy consumption for die-casting machines Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| JB/T 12554-2016 | English | 165 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
The test method of energy consumption for die-casting machines
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: JB/T 12554-2016
JB/T 12554-2016: The test method of energy consumption for die-casting machines---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/JBT12554-2016
JB
MECHANICAL INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 25.120.30
J 61
Filing No.: 55199-2016
The test method of energy consumption for die-
casting machines
ISSUED ON: APRIL 05, 2016
IMPLEMENTED ON: SEPTEMBER 01, 2016
Issued by: Ministry of Industry and Information Technology of PRC
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 5
4 Energy consumption test and calculation ... 6
4.1 Test equipment ... 6
4.2 Test requirements ... 6
4.3 Test method ... 9
4.4 Data collection ... 9
4.5 Energy consumption calculation ... 10
5 Parameter description ... 10
The test method of energy consumption for die-
casting machines
1 Scope
This standard specifies the terms and definitions, energy consumption test and
calculation, parameter expression, for the measurement of energy consumption
of cold-chamber die-casting machines and hot-chamber die-casting machines.
This standard applies to the measurement of energy consumption of cold-
chamber die-casting machines and hot-chamber die-casting machines
(hereinafter referred to as die-casting machines).
This standard does not apply to auxiliary equipment of die-casting machines,
such as the measurement of energy consumption of holding furnaces, ladlers,
extractors, sprayers, other equipment of cold-chamber die-casting machines,
as well as the extractors, sprayers, other equipment of hot-chamber die-casting
machines.
2 Normative references
The following documents are essential to the application of this document. For
the dated documents, only the versions with the dates indicated are applicable
to this document; for the undated documents, only the latest version (including
all the amendments) is applicable to this standard.
GB 20906 Safety requirements for high pressure metal diecasting units
GB/T 21269 Cold chamber die casting machines
JB/T 6309.1 Hot chamber die casting machine - Part 1: Basic parameters
JB/T 6309.2 Hot chamber die casting machine - Part 2: Testing of the
accuracy
JB/T 6309.3 Hot chamber die casting machine - Part 3: Technical
requirements
a) External fluid supply equipment, such as cooling water, compressed air,
etc.;
b) Auxiliary equipment, which is used with die-casting machine, such as
holding furnace, ladler, extractor, sprayer, etc. of cold-chamber die-casting
machine, as well as the extractor and sprayer of hot-chamber die-casting
machine.
4.2.7 Hot-chamber die-casting machine: The temperature of the holding
furnace, the nozzle temperature, the gooseneck temperature system are all set
to the ambient temperature.
4.2.8 The oil temperature of the hydraulic system shall be within 30 °C ~ 55 °C.
4.2.9 There is no option for tracking of the injection plunger of the cold chamber
die-casting machine.
4.2.10 The nozzle action of the hot-chamber die-casting machine is selected as
the fixed nozzle.
4.3 Test method
The test method is as follows:
a) Confirm the integrity of the tested sample machine.
b) Reliably connect the three-phase power tester TO the power inlet end of
the die-casting machine.
c) Set the parameters of the cold-chamber die-casting machine, according
to Table 1 and Table 3; complete the filling in Table 1. Set the parameters
of the hot-chamber die-casting machine, according to Table 2 and Table
4; complete the filling in Table 2.
d) After sample machine to be tested enters the state of continuous operation,
in fully automatic mode, AND confirming that the sample machine to be
tested reaches thermal equilibrium, start the energy consumption test.
e) For each test, the number of dry cycles shall meet the requirements of
4.2.4.
4.4 Data collection
After the energy consumption test is over, the following data shall be collected,
on the man-machine interface of the three-phase power tester and the tested
sample machine, respectively:
a) The electrical energy consumption of the whole machine E, in the unit of
kilowatt hour (kW•h);
b) The power factor of the whole machine cosφ;
c) The number of cycles n, in the unit of cycles;
d) The time of one dry cycle of the tested sample machine t, in seconds (s)
4.5 Energy consumption calculation
The energy consumption is calculated as follows:
a) The energy consumption per cycle, Ed, is calculated according to formula
(1).
Where:
Ed - Energy consumption per cycle, in kilowatt hour per cycle (kW•h/cycle);
E - The energy consumption of the whole machine, in kilowatt hour (kW•h);
n - The number of dry cycles, in cycles.
b) The specific machine related electrical energy consumption, Eb, is
calculated according to formula (2).
Where:
Eb - The specific machine related electrical energy consumption, in kilowatt
hour per kilo-Newton cycle [kW • h/ (kN • cycle)];
F - The measured clamping force of the tested sample machine, in
kilonewtons (kN)
5 Parameter description
In the die-casting machine's technical documents, it shall provide data on the
overall power consumption, energy consumption per cycle, specific machine
related electrical energy consumption, power factor, cycle time of the die-
casting machine.
Example:
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of JB/T 12554-2016 be delivered?Answer: The full copy PDF of English version of JB/T 12554-2016 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of JB/T 12554-2016_English with my colleagues?Answer: Yes. The purchased PDF of JB/T 12554-2016_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- JB/T 12554-2016 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of JB/T 12554-2016?A step-by-step guide to download PDF of JB/T 12554-2016_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "JB/T 12554-2016".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|