HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189759 (1 Dec 2024)

HG/T 3105-2009 PDF in English


HG/T 3105-2009 (HG/T3105-2009, HGT 3105-2009, HGT3105-2009)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
HG/T 3105-2009English105 Add to Cart 0-9 seconds. Auto-delivery. Vitreous and porcelain enamels for sheet steel. Production of specimens for testing Valid
HG/T 3105-1987EnglishRFQ ASK 3 days (Preparation of test pieces of glass-lined steel) Obsolete
Standards related to (historical): HG/T 3105-2009
PDF Preview

HG/T 3105-2009: PDF in English (HGT 3105-2009)

HG/T 3105-2009 HG CHEMICAL INDUSTRY STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 71.120; 25.220.50 G 94 Filing No.: 25854-2009 Replacing HG/T 3105-1987 Vitreous and porcelain enamels for sheet steel - Production of specimens for testing ISSUED ON: FEBRUARY 05, 2009 IMPLEMENTED ON: JULY 01, 2009 Issued by: Ministry of Industry and Information Technology of PRC Table of Contents Foreword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Shape and size of test specimens ... 4 4 Preparation of test specimens ... 4 5 Quality requirements of test specimens ... 5 Foreword This standard replaces HG/T 3105-1987 "Vitreous and porcelain enamels for sheet steel-Production of specimens for testing". This standard refers to ISO 2723-1995 "Vitreous and porcelain enamels for sheet steel - Production of specimens for testing". Compared with HG/T 3105-1987, the main changes of this standard are as follows: - ADD the requirements for materials; - ADD the requirements for the uniformity of vitreous and porcelain enamels; - ADD the DC spark requirement. This standard was proposed by China Petroleum and Chemical Industry Association. This standard shall be under the jurisdiction of the National Standardization Technical Committee for Glass-lined Equipment. Drafting organizations of this standard: Jiangyin Guipu Enamel Co., Ltd. The main drafters of this standard: Yu Xianzhong, Sang Linchun. This standard replaces the standard previously issued as follows: - HG/T 3105-1987 (GB/T 7992-1987). Vitreous and porcelain enamels for sheet steel - Production of specimens for testing 1 Scope This standard specifies the preparation methods and requirements for sheet steel specimens, which are used to determine the physical and chemical properties of vitreous and porcelain enamels for sheet steel. This standard applies to the preparation of vitreous and porcelain enamels for sheet steel. 2 Normative references The provisions in following documents become the provisions of this Standard through reference in this Standard. For the dated references, the subsequent amendments (excluding corrections) or revisions do not apply to this Standard; however, parties who reach an agreement based on this Standard are encouraged to study if the latest versions of these documents are applicable. For undated references, the latest edition of the referenced document applies. HG 2432 Quality standard of glass-lined equipment for industry 3 Shape and size of test specimens 3.1 There are two types of test specimens: square plate test specimens and circular plate test specimens. 3.2 Size of square plate test specimens is 80 mm × 80 mm; the thickness of the base sheet steel is (5.5 ± 0.2) mm; the thickness of vitreous and porcelain enamel is (1.1 ± 0.1) mm. 3.3 The size of the circular flat test specimens is Φ(105 ± 2) mm; the thickness of the base sheet steel is 2 mm; the thickness of the vitreous and porcelain enamel is (0.8 ± 0.11) mm. 4 Preparation of test specimens 4.1 The steel used for the preparation of test specimens shall meet the requirements of HG 2432. Meanwhile, it is consistent with the sheet steel used for manufacturing ......
 
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.