GB/T 8163-2008 (GB/T 8163-2018 Newer Version) PDF English
Search result: GB/T 8163-2008 (GB/T 8163-2018 Newer Version)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 8163-2018 | English | 145 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Seamless steel pipes for liquid service
| Valid |
| GB/T 8163-2008 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Seamless steel tubes for liquid service
| Obsolete |
| GB/T 8163-1999 | English | 279 |
Add to Cart
|
3 days
|
Seamless steel tubes for liquid service
| Obsolete |
| GB/T 8163-1987 | English | RFQ |
ASK
|
3 days
|
Seamless steel pipes for liquid service
| Obsolete |
BUY with any currencies (Euro, JPY, GBP, KRW etc.): GB/T 8163-2018 Newer version: GB/T 8163-2018
PDF Preview: GB/T 8163-2018
PDF Preview: GB/T 8163-2008
GB/T 8163-2008: PDF in English (GBT 8163-2008) GB/T 8163-2008
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.140.75
H 48
Replacing GB/T 8163-1999
Seamless Steel Tubes for Liquid Service
ISSUED ON. AUGUST 19, 2008
IMPLEMENTED ON. APRIL 1, 2009
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People’s Republic of China;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Order content ... 8
4 Dimension, Shape and Weight ... 8
5 Technical Requirements ... 11
6 Test Method ... 16
7 Inspection Rules ... 17
8 Packaging, Mark and Quality Certificate ... 18
Seamless Steel Tubes for Liquid Service
1 Scope
This Standard specifies order content, dimension, shape, weight, technical
requirements, test methods, test rules, packaging, marking and quality certificate of
seamless steel tubes for liquid service.
This Standard is applicable to the general seamless steel tubes for liquid service.
2 Normative References
The following standards contain provisions which, through reference in this text,
constitute the provisions of this Standard. For dated reference, the subsequent
amendments (excluding corrigendum) or revisions of these publications do not apply.
However, the parties who enter into agreement according to these specifications are
encouraged to study whether the latest editions of these references are applicable.
For undated references, the latest edition of the normative document is applicable to
this Standard.
GB/T 222 Permissible tolerances for chemical composition of steel products
GB/T 223.3 Chemical analysis method for steel and alloy - The diantipyryl methane
phosphomolybdate gravimetric method for the determination of phosphorus
content
GB/T 223.5 Methods for chemical analysis of iron, steel and alloy - The reduced
molybdosilicate spectro-photometric method for the determination of acid-soluble
silicon content
GB/T 223.9 Methods for chemical analysis of iron, steel and alloy - The chrome
azurol S photometric method for the determination of aluminium content
GB/T 223.11 Chemical analysis method for steel and alloy - The ammonium
persulfate oxidation volumetric method for the determination of chromium content
GB/T 223.12 Chemical analysis method for steel and alloy - The sodium carbonate
separation-diphenyl carbazide photometric method for the determination of
chromium content
GB/T 223.13 Methods for chemical analysis of iron, steel and alloy - The
ammonium ferrous sulfate titration method for the determination of vanadium
content
GB/T 223.14 Methods for chemical analysis of iron, steel and alloy - The
N-benzoy-N-phenylhydroxylamine extraction photometric method for the
determination of vanadium content
GB/T 223.16 Methods for chemical analysis of iron, steel and alloy - The
chromotropic acid photometric method for the determination of titanium content
GB/T 223.18 Methods for chemical analysis of iron, steel and alloy - The sodium
thiosulfate separation iodimetric method for the determination of copper content
GB/T 223.19 Methods for chemical analysis of iron, steel and alloy - The
neocuproine-chloroform extraction photometric method for the determination of
copper content
GB/T 223.23 Methods for chemical analysis of iron, steel and alloy - The
dimethylglyoxime spectrophotometric method for the determination of nickel
content
GB/T 223.26 Methods for chemical analysis of iron, steel and alloy - The
thiocyanate direct photometric method for the determination of molybdenum
content
GB/T 223.37 Methods for chemical analysis of iron, steel and alloy - The
thiocyanate-butyl acetate extraction spectrophotometric method for the
determination of molybdenum content
GB/T 223.40 Iron, steel and alloy-Determination of niobium content - The
sulphochlorophenol S spectrophotometric method
GB/T 223.49 Methods for chemical analysis of iron, steel and alloy-Extraction
separation-chlorophosphonazo mA spectro-photometric method for the
determination of the total rare earth content
GB/T 223.53 Methods for chemical analysis of iron, steel and alloy - The flame
atomic absorption spectrophotometric method for the determination of copper
content
GB/T 223.54 Methods for chemical analysis of iron, steel and alloy - The flame
atomic absorption spectrophotometric method for the determination of nickel
content
GB/T 223.58 Methods for chemical analysis of iron, steel and alloy - The
extraction-absorption catalytic polarographic method for the determination of
manganese content
GB/T 223.59 Methods for chemical analysis of iron, steel and alloy - The sodium
arsenite-sodium nitrite titrimetric method for the determination of phosphorus
content
GB/T 223.60 Methods for chemical analysis of iron, steel and alloy - The perchloric
acid dehydration gravimetric method for the determination of silicon content
GB/T 223.61 Methods for chemical analysis of iron, steel and alloy - The
ammonium phosphomolybdate volumetric method for the determination of
phosphorus content
GB/T 223.62 Methods for chemical analysis of iron, steel and alloy - The butyl
acetate extraction photometric method for the determination of phosphorus content
GB/T 223.63 Methods for chemical analysis of iron, steel and alloy - The sodium
(potassium) periodate photometric method for the determination of manganese
content
GB/T 223.64 Methods for chemical analysis of iron, steel and alloy - The flame
atomic absorption spectrometric method for the determination of manganese
content
GB/T 223.67 Methods for chemical analysis of iron, steel and alloy - The reducing
distillation-methylene blue photometric method for the determination of sulfur
content
GB/T 223.68 Methods for chemical analysis of iron, steel and alloy - The potassium
iodate titration method after combustion in the pipe furnace for the determination of
sulfur content
GB/T 223.69 Methods for chemical analysis of iron, steel and alloy - The
gas-volumetric method after combustion in the pipe furnace for the determination
of carbon content
GB/T 223.71 Methods for chemical analysis of iron, steel and alloy - The
gravimetric method after combustion in the pipe furnace for the determination of
carbon content
GB/T 223.72 Methods for chemical analysis of iron, steel and alloy - The alumina
chromatographic separation - Barium sulfate gravimetric method for the
determination of sulphur content
GB/T 228 GB/T 228 Metallic materials - Tensile testing at ambient temperature
(GB/T 228-2002, eqv ISO 6892.1998)
GB/T 229 Metallic materials - Charpy pendulum impact test method (GB/T
229-2007, ISO 148-1.2006, MOD)
GB 241 Metal tubes - Hydrostatic pressure testing
GB/T 242 Metallic materials – Tube - Drift expanding test (GB/T 242-2007, ISO
8493.1998, IDT)
GB/T 244 Metallic materials – Tube - Bend test (GB/T 244-2008, ISO 8491.1986,
IDT)
GB/T 246 Metallic materials – Tube - Flattening test (GB/T 246-2007, ISO
8492.1998, IDT)
GB/T 699 Carbon constructional quality steel
GB/T 1591 Low-alloy high-tensile structural steel
GB/T 2102 Acceptance inspection, packaging, mark and quality certificate of steel
tube
GB/T 2975 Mechanical test sampling location and sample preparation for steel and
steel products (GB/T 2975-1998, eqv ISO 377.1997)
GB/T 4336 Standard test method for spark discharge atomic emission
Spectrometric analysis of carbon and low-Alloy steel (Routine Method)
GB/T 5777 Seamless steel pipe and tubing-Methods for ultrasonic testing (GB/T
5777-2008, ISO 9303.1989, MOD)
GB/T 7735 Steel tubes - The inspection method on eddy current test (GB/T
7735-2004, ISO 9304.1989, MOD)
GB/T 12606 Steel tubes - The testing method of magnetic flux leakage (GB/T
12606-1999, eqv ISO 9402.1989, ISO 9598.1989)
GB/T 17395 Dimensions, shapes, masses and tolerances of seamless steel tubes
(GB/T 17395-2008, ISO 1127.1992, ISO 4200.1991, ISO 5252.1991, NEQ)
GB/T 20066 Steel and iron-Sampling and preparation of samples for the
determination of chemical composition (GB/T 20066-2006, ISO 14284.1996, IDT)
GB/T 20123 Steel and iron - Determination of total carbon and sulfur content -
Infrared absorption method after combustion in an induction furnace (routine
method) (GB/T 20123-2006, ISO 15350.2000, IDT)
GB/T 20124 Steel and iron-Determination of nitrogen content - Thermal
conductimetric method after fusion in a current of inert gas (Routine method) (GB/T
20124-2006, ISO 15351.1999, IDT)
3 Order content
The following content shall be included in the contract of purchase or order sheet of
steel tube based on this Standard.
a) Standard number;
b) Product name;
c) Designation of steel; quality classification shall be indicated in case there is such
quality classification;
d) Dimensions;
e) Lot size (total weight or total length);
f) Delivery state;
g) Special requirement.
4 Dimension, Shape and Weight
4.1 Outside Diameter and Wall Thickness
The outside diameter (D) and wall thickness (S) of steel tube shall meet the
req...
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|