GB/T 8-2021 PDF in English
GB/T 8-2021 (GB/T8-2021, GBT 8-2021, GBT8-2021)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 8-2021 | English | 110 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Square head bolts -- Product grade C
| Valid |
Standards related to: GB/T 8-2021
PDF Preview
GB/T 8-2021: PDF in English (GBT 8-2021) GB/T 8-2021
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 21.060.10
CCS J 13
Replace GB/T 8-1988
Square head bolts -- Product grade C
ISSUED ON. DECEMBER 31, 2021
IMPLEMENTED ON. JULY 1, 2022
Issued by. State Administration for Market Regulation;
Standardization Administration of PRC.
Table of Contents
Foreword... 3
1 Scope... 5
2 Normative references... 5
3 Terms and definitions... 6
4 Type and dimensions... 6
5 Technical conditions and reference standards... 7
6 Marking... 8
Foreword
This standard is drafted in accordance with the provisions of GB/T 1.1-2020 “Directives
for standardization - Part 1.Rules for the structure and drafting of standardizing
documents”.
This document is one of the national standards for the “Square head bolts” series, in the
series the following documents have been issued.
--- GB/T 8 Square head bolts -- Product grade C;
--- GB/T 35 Square head bolts with small head.
This standard replaces GB/T 8-1988 “Square head bolts -- Product grade C”. Compared
with GB/T 8-1988, except for the structural adjustment and editorial revisions, the main
technical content changes are as follows.
a) The reference thread standards are unified as GB/T 193 and GB/T 9146 (see Table
2; see Table 2 of the 1988 edition);
b) “Commodity specification range” is replaced with “Preferred length range” (see
Table 1; see Table 1 of the 1988 edition);
c) “The general technical conditions are in accordance with GB/T 16938”, the
provision is added (see Table 2);
d) The oxidation surface treatment is deleted (see Table 2 of the 1988 edition);
e) “The technical requirements for non-electrolytically applied zinc flake coatings
are in accordance with GB/T 5267.2”, the provision is added (see Table 2);
f) “If other technical requirements or surface treatment are required, they shall be
agreed upon by the supplier and the buyer”, the provision is added (see Table 2);
g) “The requirements for surface defects are in accordance with GB/T 5779.1”, the
provision is added (see Table 2).
Please note that some of the contents of this document may involve patents. The issuing
agency of this document is not responsible for identifying patents.
This document was proposed by China Machinery Industry Federation.
This document shall be under the jurisdiction of the Technical Committee on Fasteners
of Standardization Administration of China (SAC/TC85).
Square head bolts -- Product grade C
1 Scope
This document specifies the types, dimensions, technical conditions, and marking of
square head bolts.
This document is applicable to square head bolts with thread specifications of
M10~M48 and product grade C.
2 Normative references
The following documents contain the provisions which, through normative reference in
this document, constitute the essential provisions of this document. For the dated
referenced documents, only the versions with the indicated dates are applicable to this
document; for the undated referenced documents, only the latest version (including all
the amendments) is applicable to this document.
GB/T 2 Fasteners -- Ends of parts with external thread
GB/T 90.1 Fasteners -- Acceptance inspection
GB/T 90.2 Fasteners -- Marking and packaging
GB/T 193 General purpose metric screw threads -- General plan
GB/T 1237 Designation system for fasteners
GB/T 3098.1 Mechanical properties of fasteners -- Bolts, screws and studs
GB/T 3103.1 Tolerances for fasteners -- Bolts, screws, studs and nuts
GB/T 5267.1 Fasteners -- Electroplated coatings
GB/T 5267.2 Fasteners -- Non-electrolytically applied zinc flake coatings
GB/T 5276 Fasteners -- Bolts, screws, studs and nuts -- Symbols and descriptions of
dimensions
GB/T 5779.1 Fasteners -- Surface discontinuities -- Bolts, screws and studs for
general requirements
GB/T 9146 General purpose metric screw threads -- Limits of sizes for the screw
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|