GB/T 6609.23-2004 PDF English
US$139.00 · In stock · Download in 9 secondsGB/T 6609.23-2004: Chemical analysis methods and determination of physical performance of alumina -- Preparation and storage of test samples Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 6609.23-2004 | English | 90 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Chemical analysis methods and determination of physical performance of alumina -- Preparation and storage of test samples
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 6609.23-2004
GB/T 6609.23-2004: Chemical analysis methods and determination of physical performance of alumina -- Preparation and storage of test samples
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT6609.23-2004
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 71.100.10
H 12
Chemical Analysis Methods and Determination of Physical
Performance of Alumina – Preparation and Storage of Test
Samples
(ISO 802.1976, MOD)
Issued on: FEBRUARY 5, 2004
Implemented on: JULY 1, 2004
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative References... 4
3 Preparation of Specimen... 4
4.Container Labeling... 5
Foreword
GB/T 6609-2004 consists of 29 parts; this Standard is Part 23 of it.
This Standard modified and adopted ISO 802.1976 Aluminum Oxide Primarily Used for the
Production of Aluminum - Preparation and Storage of Test Samples. The major technical
differences between this Standard and ISO 802.1976 are as follows.
--- To be consistent with other parts of GB/T 6609, delete Foreword and Annex of ISO
802.1973, and add Foreword of this Standard;
--- Change the sample weight of the original specimen in 3.2 from 300g to 500g;
--- Change the test mesh in 3.3.1 and 3.3.2.1 from 0.2mm to 0.125mm according to the
characteristics of China’s alumina products;
--- To facilitate description, combine the first and the second paragraphs of 3.3.3 in ISO
802.1976 into 3.3.3.1 of this Standard; while combine the third to the fifth paragraphs
into 3.3.3.2 of this Standard.
This Standard was proposed by China Nonferrous Metals Industry Association.
This Standard shall be under the jurisdiction of National Technical Committee on Nonferrous
Metals of Standardization Administration of China.
This Standard was entrusted to Chalco Zhengzhou Research Institute and China Nonferrous
Metals Industry Standards, Metrology and Quality Research Institute for drafting.
This Standard was drafted by Chalco Zhengzhou Research Institute.
Chief drafting staffs of this Standard. Meng Fuhai, Chen Jing, Lu Peiqian, and Chu Bingwu.
This Standard was entrusted to National Technical Committee on Nonferrous Metals of
Standardization Administration of Chian for interpretation.
This Standard was first-time published hereby.
Chemical Analysis Methods and Determination of Physical
Performance of Alumina – Preparation and Storage of Test
Samples
1 Scope
This Standard specifies the preparation and storage methods of original and drying specimens
of alumina primarily used in aluminum production.
2 Normative References
The provisions in following documents become the provisions of this Standard through
reference in this Standard. For dated references, the subsequent amendments (excluding
corrigendum) or revisions do not apply to this Standard, however, parties who reach an
agreement based on this Standard are encouraged to study if the latest versions of these
documents are applicable. For undated references, the latest edition of the referenced
document applies.
GB/T 6609.22 Chemical analysis methods and determination of physical
performance of alumina - Sampling
3 Preparation of Specimen
3.1 Laboratory sample
The laboratory sample shall be prepared according to the method specified in GB/T 6609.22.
3.2 Original specimen
The original specimen is primarily used for determining certain geometric properties, physical
tests, physicochemical tests, and moisture determination.
Weigh approximately 500 g of laboratory sample and place it into a sealed container, ideally
just enough to be filled with the sample.
3.3 Drying specimen
The drying specimen is used for composition analysis and determination of certain geometric
properties as well as physical and physicochemical tests.
3.3.1 Principle
The test materials were ground and sieved until all of them passed through a 0.125 mm test
mesh.
The test materials were thoroughly mixed and dried at 300°C.
3.3.2 Equipment
Common laboratory equipment and.
3.3.2.1 Test sieve. 0.125 mm mesh. Made of materials that do not introduce impurities to be
measured. Select the test sieve based on the properties of the alumina and the impurities to be
measured.
3.3.2.2 Corundum mortar.
3.3.3 Procedure
3.3.3.1 Sieve 100g~200g of laboratory sample (3.1) through the test sieve (3.3.2.1). Grind the
coarse material on the sieve using a corundum mortar (3.3.2.2), and sieve again. Thoroughly
mix the sieving with the initial sieving. Repeat the grinding, sieving, and mixing process until
all the specimens passes through the test sieve.
4.Container Labeling
Containers must be labeled with the following.
a) Product name;
b) Product source;
c) Specimen properties (original specimen or drying specimen);
d) Model of the used test sieve;
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 6609.23-2004 be delivered?Answer: The full copy PDF of English version of GB/T 6609.23-2004 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 6609.23-2004_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6609.23-2004_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 6609.23-2004 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 6609.23-2004?A step-by-step guide to download PDF of GB/T 6609.23-2004_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 6609.23-2004".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|