GB/T 40386-2021 PDF in English
GB/T 40386-2021 (GB/T40386-2021, GBT 40386-2021, GBT40386-2021)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 40386-2021 | English | 185 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Recycling materials for pure aluminium
| Valid |
Standards related to: GB/T 40386-2021
PDF Preview
GB/T 40386-2021: PDF in English (GBT 40386-2021) GB/T 40386-2021
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.120.10
CCS H 61
Recycling materials for pure aluminium
ISSUED ON: AUGUST 20, 2021
IMPLEMENTED ON: MARCH 1, 2022
Issued by: State Administration for Market Regulation;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 4
4 Categories ... 6
5 Requirements ... 7
6 Test methods ... 8
7 Inspection rules ... 8
8 Incoming inspection and acceptance ... 8
9 Packaging, transportation, storage, and quality certificate ... 8
10 Contents of order form (or contract) ... 8
Appendix A (Informative) Typical examples of raw material sources ... 9
Appendix B (Normative) Incoming inspection and acceptance ... 13
Foreword
This standard is drafted in accordance with the provisions of GB/T 1.1-2020 “Directives
for standardization - Part 1: Rules for the structure and drafting of standardizing
documents”.
Please note that some of the contents of this document may involve patents. The issuing
agency of this document is not responsible for identifying patents.
This document was proposed by China Non-ferrous Metals Industry Association.
This document shall be under the jurisdiction of the Technical Committee on
Nonferrous Metals of Standardization Administration of China (SAC/TC243).
Drafting organizations of this document: Shandong Nanshan Science and Technology
Research Institute Co., Ltd., Guangzhou Youboliangcai Technology Co., Ltd.,
Northeast Light Alloy Co., Ltd., Foshan Nanhai Yimao Metal Materials Co., Ltd.,
Southwest Aluminium (Group) Co., Ltd., China Nonferrous Metals Techno-Economic
Research Institute Co., Ltd., Xiamen Xiashun Aluminium Foil Co., Ltd., Shandong
Innovation Metal Technology Co., Ltd., Shandong Nanshan Aluminum Co., Ltd.,
Chengdu Sunlight Aluminum Products Co., Ltd., Liaoning Zhongwang Group Co., Ltd.,
Ningbo Huilong Recycled Resources Technology Holding Co., Ltd.
The main drafters of this document: Wu Xinfeng, Pan Feng, Ma Yue, Li Tao, Li Zhigang,
Du Heng’an, Tian Xiaomei, Zhao Xiaoguang, Zhan Shifen, Liu Yueming, Yao
Chunming, Li Honglin, Yuan Weibing, Huang Tongyang, Hewei.
Recycling materials for pure aluminium
1 Scope
This document specifies the classification, requirements, test methods, inspection rules,
incoming inspection and acceptance, packaging, transportation, storage, quality
certificate, and order form (or contract) of recycling materials for pure aluminium.
This document applies to the pure aluminum raw materials for melting and casting
(hereinafter referred to as raw materials) obtained after recycled aluminum through
sorting and other processing.
2 Normative references
The following documents contain the provisions which, through normative reference in
this document, constitute the essential provisions of this document. For the dated
referenced documents, only the versions with the indicated dates are applicable to this
document; for the undated referenced documents, only the latest version (including all
the amendments) is applicable to this document.
GB/T 8005.1 Aluminium and aluminium alloy terms and definitions - Part 1: Product
and method of processing and treatment
GB/T 40382-2021 Recycling materials for wrought aluminium alloys
3 Terms and definitions
The terms and definitions defined in GB/T 8005.1 and the following apply to this
document.
3.1 recycling materials for pure aluminium
The pure aluminum raw materials for melting and casting that are obtained after sorting
and other processing of recycled aluminum, and meet the relevant requirements of this
document.
3.2 foreign material
Non-metallic substances mixed in or attached to raw materials.
Note: They include wood, textile, plastic, glass, stone, paper, sand, rubber, sludge, powder with particle
size not greater than 2 mm (such as powder, oil, crystalline salt, fiber powder), material blocks with the
6 Test methods
The test shall be carried out according to GB/T 40382-2021.
7 Inspection rules
The inspection rules shall comply with the provisions of GB/T 40382-2021.
8 Incoming inspection and acceptance
The buyer shall conduct incoming inspection and acceptance in accordance with
Appendix B. If the inspection results are inconsistent with the provisions of this
document and the order form (or contract), it shall be submitted to the supplier in
writing. If arbitration is required, an organization recognized by both the supplier and
the buyer can be entrusted to carry out the arbitration inspection, and the sample shall
be taken jointly with the buyer.
9 Packaging, transportation, storage, and quality certificate
All these shall comply with the provisions of GB/T 40382-2021.
10 Contents of an order form (or contract)
An order form (or contract) for the materials listed in this document shall include the
following contents:
a) Raw material categories, raw material sources;
b) Packaging methods of raw materials;
c) Special requirements for the appearance and dimensions of raw materials;
d) Foreign material content;
e) Volatile substance content;
f) Metal recovery rate;
g) Other special requirements;
h) This document number.
Appendix B
(Normative)
Incoming inspection and acceptance
B.1 Inspection items and requirements
B.1.1 Inspection items
Each batch of raw materials shall be inspected for appearance quality, volatile substance
content, metal recovery rate, and chemical composition.
B.1.2 Appearance quality
B.1.2.1 The surface of recycled aluminum ingots shall be clean and free of serious flash
or pores.
B.1.2.2 The appearance of other raw materials shall be clean, without obvious oil, sand,
and corrosion, and without obvious paper, plastic, rubber, foam, fiber, iron, copper, tin,
and other non-aluminium metals.
B.1.3 Volatile substance content
The moisture content of raw materials should be no more than 0.5%, and other volatile
substances shall be no more than 1%.
B.1.4 Metal recovery rate
The metal recovery rates of raw materials should meet the requirements in Table B.1.
B.1.5 Chemical composition
The chemical composition of raw materials should comply with the provisions of Table
B.2.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|