GB/T 40341-2021 PDF in English
GB/T 40341-2021 (GB/T40341-2021, GBT 40341-2021, GBT40341-2021)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 40341-2021 | English | 230 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
High strength and toughness alloy structure steel bars for deep sea oil field drilling and exploiting
| Valid |
Standards related to (historical): GB/T 40341-2021
PDF Preview
GB/T 40341-2021: PDF in English (GBT 40341-2021) GB/T 40341-2021
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.140.20
CCS H 54
High strength and toughness alloy structure steel bars for
deep sea oil field drilling and exploiting
ISSUED ON: AUGUST 20, 2021
IMPLEMENTED ON: MARCH 01, 2022
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions... 6
4 Classification and code ... 6
5 Order content ... 7
6 Size, shape, weight ... 7
7 Technical requirements ... 8
8 Test methods ... 14
9 Inspection rules ... 15
10 Packaging, marking and quality certificate ... 16
Appendix A (Informative) Comparison of designations at home and abroad ... 17
High strength and toughness alloy structure steel bars for
deep sea oil field drilling and exploiting
1 Scope
This document specifies the classification and code, order content, size, shape, weight,
technical requirements, test methods, inspection rules, packaging, marking and quality
certificate of high strength and toughness alloy structure for deep sea oil field drilling
and exploiting.
This document applies to the manufacture of forged steel bars (hereinafter referred to
as steel bars), with a nominal diameter of 250 mm ~ 1200 mm, for deep sea oil field
drilling and exploiting equipment.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this
document and are indispensable for its application. For dated references, only the
version corresponding to that date is applicable to this document; for undated references,
the latest version (including all amendments) is applicable to this document.
GB/T 223.4, Iron, steel and alloy - Determination of manganese content -
Potentiometric or visual titration method
GB/T 223.5, Steel and iron - Determination of acid-soluble silicon and total silicon
content - Reduced molybdosilicate spectrophotometric method
GB/T 223.9, Iron, steel and alloy - Determination of aluminium content - Chrome
azurol S photometric method
GB/T 223.11, Iron, steel and alloy - Determination of chromium content - Visual
titration or potentiometric titration method
GB/T 223.13, Methods for chemical analysis of iron, steel and alloy－ The
ammonium ferrous sulfate titration method for the determination of vanadium
content
GB/T 223.18, Methods for chemical analysis of iron steel and alloy. The sodium
thiosulfate separation iodimetric method for the determination of cupper content
GB/T 223.23, Iron, steel and alloy - Determination of nickel content - The
dimethylglyoxime spectrophotometric method
GB/T 10561-2005, Steel - Determination of content of nonmetallic inclusions -
Micrographic method using standards diagrams
GB/T 11261, Steel and iron - Determination of oxygen content - The pulse heating
inert gas fusion-infra-red absorption method
GB/T 13298, Inspection methods of microstructure for metals
GB/T 13299, Steel - Determination of Microstructure
GB/T 15711, Inspection of non-metallic inclusions of steel - Etching test method of
tower samples
GB/T 17505, Steel and steel products - General technical delivery requirements
GB/T 20066, Steel and iron - Sampling and preparation of samples for the
determination of chemical composition
GB/T 20123, Steel and iron - Determination of total carbon and sulfur content
Infrared absorption method after combustion in an induction furnace (routine
method)
GB/T 34474.1, Determination of banded structure of steel - Part 1: Micrographic
method using standards diagrams
3 Terms and definitions
There are no terms and definitions that need to be defined in this document.
4 Classification and code
4.1 Steel bars, by surface types, are divided into:
a) Pressure processing surface (code-named SPP);
b) Polishing (code-named SP);
c) Peeling (code-named SF).
4.2 Steel bars, by heat treatment states, are divided into:
a) Annealing (code-named A);
b) High temperature tempering (code-named T);
c) Normalizing (code-named N);
d) Normalizing + tempering (code-named N+T).
4.3 Steel bars, by use processing methods, are divided into:
a) Steel for hot pressing (code-named UHP);
b) Steel for machining (code-named UC).
5 Order content
The contract or order that place orders in accordance with this document shall include
the following contents:
a) document number;
b) product name:
c) designation;
d) smelting method (see 7.2);
e) delivery weight (or quantity);
f) size and accuracy;
g) use processing methods;
h) delivery status;
i) mechanical properties;
j) macro-structure (7.5.2);
k) special requirements.
6 Size, shape, weight
6.1 Size and allowable deviation
6.1.1 The size and allowable deviation of the pressure-processed steel bars shall comply
with the requirements of Table 1 in GB/T 908-2019. The size allowable deviation of
steel bars with a nominal diameter greater than 1 000 mm shall be determined through
negotiation between the supplier and the buyer.
6.1.2 The size and allowable deviation of polished steel bars shall comply with the
provisions of Table 3 in GB/T 908-2019; the size allowable deviation of steel bars with
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|