GB/T 3952-2016 PDF English
US$115.00 · In stock · Download in 9 secondsGB/T 3952-2016: Copper drawing stock for electrical purpose Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 3952: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 3952-2016 | English | 115 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Copper drawing stock for electrical purpose
| Valid |
| GB/T 3952-2008 | English | 479 |
Add to Cart
|
3 days
|
Copper drawing stock for electrical purpose
| Obsolete |
| GB/T 3952-1998 | English | 359 |
Add to Cart
|
3 days
|
Copper drawing stock for electrical purposes
| Obsolete |
| GB 3952.1-1989 | English | 199 |
Add to Cart
|
2 days
|
Round copper rods for electrical purposes--General
| Obsolete |
| GB 3952-1983 | English | 199 |
Add to Cart
|
2 days
|
(Electrician round copper rod)
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 3952-2016
GB/T 3952-2016: Copper drawing stock for electrical purpose---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT3952-2016
GB
NATIONAL STANDARD
ICS 77.150.30
H 62
Replacing GB/T 3952-2008
Copper drawing stock for electrical purpose
Issued on. AUGUST 29, 2016
Implemented on. JULY 01, 2017
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of China.
Table of Contents
Foreword... 3
1 Scope... 5
2 Normative references... 5
3 Requirements... 5
4 Test method... 11
5 Inspection rules... 12
6 Marking, packaging, transport, storage and quality certificate... 14
7 Order (or contract) content... 15
Appendix A (Informative) Copper drawing stock for electrical purposes -
Determination of the amount of copper powder - Dry brushing method... 16
Appendix B (Informative) Test method for annealing performance of copper
drawing stocks... 18
Appendix C (Informative) Test method for oxide film of copper drawing stock
... 19
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 3952-2008 “Copper drawing stocks for electrical
purposes”. As compared with GB/T 3952-2008, the main technical changes of
this standard are as follows.
- In the normative references, DELETE GB/T 238 “Metallic materials - Wire -
Reverse bend test”; ADD YS/T 464 “Methods for analytical of copper
cathode - The optical emission spectrometry” and GB/T 23606
“Copper-hydrogen embrittlement test method”.
- MODIFY the content requirements of the impurity element Bi in the
designations T2 and TU2, changing its mass fraction from 0.0006% to
0.0005%.
- MODIFY the requirements of the total amount of impurities in the
designation T3, changing it from 0.05% to 0.06%.
- DEFINE the gauge distance for the elongation test sample at 200mm.
- UNIFY the gauge distance for the sample of copper powder amount and
twist off test into 250mm.
- ADD the surface oxide film indicator requirements of the copper drawing
stocks; ADD the oxide film determination method, as shown in Appendix
C.
- CHANGE the sampling amount for the chemical composition, electrical
performance, copper powder amount, and hydrogen embrittlement from
every 15 rolls or 30 t into every 15 rolls or 60 ton.
- MODIFY the hydrogen embrittlement test method of the oxygen-free
copper drawing blanks, changing from the Appendix B hydrogen
embrittlement test method of the oxygen-free copper drawing blanks into
GB/T 23606 hydrogen embrittlement test method.
This standard was proposed by China Nonferrous Metals Industry Association.
The standard shall be under the jurisdiction of the National Nonferrous Metals
Standardization Technical Committee (SAC/TC 243).
The responsible drafting organizations of this standard. Jiangxi Copper Co.,
Ltd., Yunnan Copper Co., Ltd., Jiangsu Jiangrun Copper Co., Ltd., Tongling
Nonferrous Metals Group Holdings Tongguan Electric Co., Ltd.
The participating drafting organizations of this standard. Ningbo Jintian Copper
(Group) Co., Ltd., Shandong Xiangrui Copper Co., Ltd., Shandong Hengyuan
Copper Co., Ltd., CHALCO Kunming Copper Co., Ltd.
The main drafters of this standard. Wei Limin, Xiao Hongqiang, Li Donglin, Zhu
Xianming, Wang Kesheng, Wang Jianhua, Hu zheping, Wang Yongru, Liu
Qingguo, Yan Zhifu, Chen Zhongliang, Yin Jie, Liu Wanrong, Wang Jinmei,
Zhang Yong, Liu Haifeng, Wu Yucai, Li Gang.
This Standard replaces the standard previously issued as follows.
- GB/T 3952.1-1989, GB/T 3952.2-1989, GB/T 3952.3-1989, GB/T
3952-1998, GB/T 3952-2008.
- GB/T 3954.1-1989.
Copper drawing stock for electrical purpose
1 Scope
This standard specifies the requirements, test methods, inspection rules,
marking, packaging, transport, storage, quality certificates, and orders (or
contracts) contents of the copper drawing stock for electrical purposes.
This standard applies to the circular cross-section copper wire stock having a
diameter of 6.0 mm ~ 35.0 mm, which is used for further drawing to produce
wire materials OR for other copper conductors for electrical purposes.
2 Normative references
The following documents are essential to the application of this document. For
the dated documents, only the versions with the dates indicated are applicable
to this document; for the undated documents, only the latest version (including
all the amendments) are applicable to this Standard.
GB/T 230.1 Metallic materials - Rockwell hardness test - Part 1.Test
methods (scale A, B, C, D, E, F, G, H, K, N, T)
GB/T 3048.2 Test methods for electrical properties of electric cables and
wires - Part 2.Test of electrical resistivity of metallic materials
GB/T 4909.2 Test methods for bare wires - Part 2.Measurement of
dimensions
GB/T 4909.3 Test methods for bare wires - Part 3.Tensile test
GB/T 4909.4 Test method for bare wires - Part 4.Torsion test
3 Requirements
3.1 Product classification
3.1.1 Designation, status, specifications
The designations, status and specifications of the copper drawing stock shall
comply with the provisions of Table 1.
3.2 Chemical composition
3.2.1 The chemical compositions of the copper drawing stock having
designations T1 and TU1 shall comply with the provisions of Table 2, wherein
the oxygen content of T1 shall not be greater than 0.040%, AND the oxygen
content of TU1 shall not be greater than 0.0010%.
3.3 Dimension and its allowable deviation
3.3.1 The diameter of copper drawing stock and its allowable deviation shall
comply with the requirements in Table 5.
3.3.2 The copper drawing stock shall be supplied in rolls, each roll shall be
continuous and one piece, AND it is not allowed for welding. The minimum
weight of a roll shall be not less than 1 t, BUT it is allowed for both parties to
determine the supply weight through negotiation.
3.4 Surface quality
3.4.1 The copper drawing stock shall be round and complete, the dimension is
uniform (complying with the requirements of 3.3.1), AND it may be directly
used without the need of pickling and peeling off.
3.6 Torsional performance
The copper drawing stock having a diameter of 6.0 mm ~ 10.0 mm (M20, M07
status) shall be subjected to the twist off test, AND the torsional performance of
the copper drawing stock of different designations shall comply with the
provisions of Table 7.
3.8 Other requirements for copper drawing stock
3.8.1 Copper powder amount
As for the copper drawing stock which is produced by the continuous casting
and rolling process, if required by the user AND indicated in the contract, it
shall be subjected to the copper powder amount test using the method in
Appendix A (only applicable to the copper drawing stock of Φ8 mm). As for the
copper drawing stock for enameled wire, the copper powder amount shall not
exceed 8 mg/250 mm; AND the copper powder amount of other copper
drawing stock shall not be greater than 15 mg/250 mm.
4 Test method
4.1 Chemical composition
The chemical composition analysis method of copper drawing stocks may
follow the requirements of GB/T 5121 (all parts) or YS/T 464.The arbitration
analysis method shall be in accordance with GB/T 5121 (all parts).
4.2 Dimensional measurement
The method of measuring the size of copper drawing stock shall be in
accordance with the provisions of GB/T 4909.2.
4.3 Surface quality
The surface quality of copper drawing stocks is visually inspected AND the
surface oxide film test is carried out with reference to Appendix C.
4.6 Electrical performance
4.6.1 The test methods for the resistivity of copper drawing stock shall be in
accordance with the requirements of GB/T 3048.2.
4.6.2 It shall prepare sample for the resistivity test using the following methods.
CLEAN and PROCESS the sample to such an extent as having a diameter of 2
mm; REMOVE oil stain; MAKE it subjected to annealing in the 500 °C ~ 550 °C
protective atmosphere for 30 min; then in the same protective atmosphere,
COOL it down quickly OR quickly TRANSFER it from air into water for cooling
purposes.
4.7 Amount of copper powder
The test of the copper powder amount of the copper drawing stock is carried
out in accordance with the method of Appendix A, OR in accordance with the
OR the method determined by consultation between the supplier and the
purchaser.
4.8 Hydrogen embrittlement
The hydrogen embrittlement test method of the oxygen-free copper drawing
stock shall be in accordance with the requirements of GB/T 23606.
5 Inspection rules
5.1 Inspection and acceptance
5.1.1 The copper drawing stock shall be inspected by the quality supervision
department of the supplier to ensure that the product quality complies with the
requirements of this standard or the order (or contract), AND meanwhile the
quality certificate shall be filled.
5.2 Batching
Copper drawing stocks shall be submitted in batches, AND each batch shall be
composed of the copper drawing stocks of the same designations, status, and
specifications.
5.3 Test items
5.4 Arbitration sampling and sample preparation
5.4.1 Sampling
In accordance with the different inspection items, it shall calculate the sampling
amount for each batch of copper drawing stock in accordance with the number
of rolls OR the weight as specified in Table 9, use the sampling method of
larger amount to determine the final sampling method, use this method to
determine the sampling amount, AND randomly take the samples of
corresponding amount from this batch of copper drawing block.
5.5 Determination of test results
5.5.1 When the chemical composition and electrical performance are
disqualified, the corresponding batch is deemed as disqualified. When the
mechanical properties, torsional performance, surface quality and dimensional
deviation are disqualified, the corresponding roll is deemed as disqualified.
5.5.2 When the amount of copper powder, hydrogen embrittlement and
annealing performance are not in accordance with this standard or the order
(or contract), a double number of samples shall be taken from this batch of
products (including the roll of product which is disqualified in the original
inspection) for repeated test.
6 Marking, packaging, transport, storage and quality certificate
6.1 Marking
The each roll of qualified copper drawing stock shall be attached with the label
indicating the following information.
6.2 Packaging
6.3 Transport, storage
In the storage, handling and transport process, it shall pay attention to protect
the copper drawing stock from mechanical damage AND to prevent copper
drawing stock from dampen or erosion from corrosive material.
6.4 Quality certificate
Each batch of copper drawing stocks shall be accompanied by a product
quality certificate, specifying the following information.
7 Order (or contract) content
The order (or contract) which is used for ordering the materials as listed in this
standard shall include the following contents.
Appendix A
(Informative)
Copper drawing stock for electrical purposes - Determination of the
amount of copper powder - Dry brushing method
A.1 Scope
This Appendix specifies the method for determining the amount of copper
powder on the surface of copper drawing stock which is processed by
continuous casting and rolling for electrical purposes.
This appendix is only applicable to the determination of the amount of copper
powder on the surface of copper drawing stock of Φ8 mm which is processed
by continuous casting and rolling.
A.2 Sample preparation
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 3952-2016 be delivered?Answer: The full copy PDF of English version of GB/T 3952-2016 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 3952-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3952-2016_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 3952-2016 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 3952-2016?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3952-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 3952-2016?A step-by-step guide to download PDF of GB/T 3952-2016_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 3952-2016".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|