HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (12 Oct 2025)

GB/T 39372-2020 PDF English

US$105.00 · In stock · Download in 9 seconds
GB/T 39372-2020: Leather - Physical and mechanical tests - Determination of percentage extension
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] deliveryName of Chinese StandardStatus
GB/T 39372-2020English105 Add to Cart 0-9 seconds. Auto-delivery Leather - Physical and mechanical tests - Determination of percentage extension Valid

Excerpted PDFs (Download full copy in 9 seconds upon purchase)

PDF Preview: GB/T 39372-2020
      

Similar standards

GB/T 39373   GB/T 39371   GB/T 39374   GB/T 39365   

GB/T 39372-2020: Leather - Physical and mechanical tests - Determination of percentage extension

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT39372-2020
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 59.140.30 Y 46 Leather - Physical and Mechanical Tests - Determination of Percentage Extension (ISO 17236.2016, Leather - Physical and Mechanical Tests - Determination of Extension Set, MOD) Issued on: NOVEMBER 19, 2020 Implemented on: JUNE 1, 2021 Issued by. State Administration for Market Regulation; Standardization Administration of the People’s Republic of China.

Table of Contents

Foreword... 3 1 Scope... 5 2 Normative References... 5 3 Principle... 5 4 Instruments and Equipment... 5 5 Sampling and Specimen Preparation... 6 6 Test Methods... 7 7 Result Expression... 7 8 Test Report... 8

Foreword

This Standard was drafted in accordance with the rules in GB/T 1.1-2009. This Standard uses the re-drafting method in the modification and adoption of ISO 17236.2016 Leather - Physical and Mechanical Tests - Determination of Extension Set. In comparison with ISO 17236.2016, this Standard has structural adjustments as follows. ---The content of the third paragraph of 5.2 is modified into the NOTE of 5.2, so as to comply with the habits of our country (see 5.2); ---The content of 8 c) about result expression is adjusted to “7 Result Expression” (see Chapter 7). In comparison with ISO 17236.2016, the technical differences and the causes for these differences are as follows. ---In terms of Normative References, this Standard adjusts the technical differences, so as to adapt to the technical conditions of our country. The adjustments are intensively reflected in Chapter 2 “Normative References”. The specific adjustments are as follows.  GB/T 39364, which modifies and adopts International standard, is used to replace ISO 2418 (see 5.1);  QB/T 2707, which modifies and adopts International standard, is used to replace ISO 2419 (see 4.3 and 5.3);  QB/T 2709, which modifies and adopts International standard, is used to replace ISO 2589 (see 4.2 and 5.4);  The reference of ISO 7500-1 is deleted; ---In tensile machine, the accuracy level of tensile force recording device is modified (see 4.1); ---The instructions for the sampling of non-standard sites are added, so as to satisfy the demands of routine inspection (or sampling directly from shoes and clothing) (see 5.1); ---The stipulations of horizontal and longitudinal specimens are added to sampling and specimen preparation, so as to facilitate standard compilation and test results recording (see 5.2); ---The calculation formula is adjusted and the unit description of percentage extension is added, so as to comply with the habits of our country (see Chapter 7); ---The requirements for the accuracy of the calculation results are added, which enhances the comparability of results between laboratories (see Chapter 7); ---The test report is adjusted and the requirements for the accuracy of thickness are added, which enhances the comparability of results between laboratories (see Chapter 8). This Standard also makes the following editorial modifications. ---The title of this Standard is modified into. “Leather - Physical and Mechanical Tests - Determination of Percentage Extension”; ---The description of the tensile machine in 4.1 is modified from two clauses into the itemized form (see 4.1); ---Clause titles are added to “5 Sampling and Specimen Preparation” (see Chapter 5). This Standard was proposed by China National Light Industry Council. This Standard shall be under the jurisdiction of National Technical Committee 252 on Leather of Standardization Administration of China (SAC/TC 252). The drafting organizations of this Standard. Dongguan Weiside Technology Development Co., Ltd.; Chinatesta (Shenzhen) Testing Services Co., Ltd.; Liming Vocational University; China Leather & Footwear Research Institute Co., Ltd.; Jiaxing Fur and Shoe Industry Research Institute; Quality and Technical Supervision Standards and Coding Office of Huizhou City, Guangdong Province; Jinjiang Dongyi Shoes Industry Co., Ltd. The main drafters of this Standard. Bu Qiaoqiao, Yuan Jingjie, Li Xiang, Chen Xiaohong, Su Guohui, Wen Zhifan, Zhang Wenfu, Dai Ziqiang. can be mechanically or pneumatically clamped. There shall be certain texture inside the clamp, so as to ensure that when the applied load reaches the maximum, the specimen does not slip, and moves at a constant rate of (50 ± 5) mm/min. 4.2 Thickness gauge, which complies with the stipulations of QB/T 2709. 4.3 Die cutter, which complies with the stipulations of QB/T 2707.The inner wall is a rectangle with a size of (250 ± 5) mm  (10.0 ± 0.5) mm. 4.4 Scale ruler, with an accuracy of 0.5 mm. 4.5 Stopwatch, with an accuracy of 1 s.

5 Sampling and Specimen Preparation

5.1 Sampling In accordance with the stipulations of GB/T 39364, conduct sampling. If it is not possible to take samples from standard parts (for example, direct sampling from shoes and clothing), sampling shall be conducted at any part within the available area. The specimens shall be representative and indicated in the test report. 5.2 Specimen Preparation Use the die cutter (4.3) to cut 6 specimens from the grain surface, in which, the long sides of 3 specimens are parallel to the back ridge line (longitudinal specimens), and the long sides of the other 3 specimens are perpendicular to the back ridge line (horizontal specimens). NOTE 1.for smaller samples, the number of specimens may be reduced; the number of the decreased longitudinal specimens and the decreased horizontal specimens shall be consistent. NOTE 2.if there are more than 2 samples in the same batch of products that need to be tested, at least 1 specimen shall be cut from each sample in each direction, and the total number of specimens in each direction shall be not less than 3. 5.3 Specimen Conditioning In accordance with the stipulations of QB/T 2707, conduct specimen conditioning. 5.4 Thickness Determination In accordance with the stipulations of QB/T 2709, conduct thickness determination. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.


      

Tips & Frequently Asked Questions

Question 1: How long will the true-PDF of English version of GB/T 39372-2020 be delivered?

Answer: The full copy PDF of English version of GB/T 39372-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 39372-2020_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 39372-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. www.ChineseStandard.us -- GB/T 39372-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of GB/T 39372-2020?

A step-by-step guide to download PDF of GB/T 39372-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 39372-2020".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9