GB/T 3820-1997 PDF English
US$90.00 · In stock · Download in 9 secondsGB/T 3820-1997: Determination of thickness of textiles and textile products Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureGB/T 3820: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 3820-1997 | English | 90 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Determination of thickness of textiles and textile products
| |
| GB 3820-1983 | English | 199 |
Add to Cart
|
2 days
|
Determination of thickness of woven and knitted fabrics
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 3820-1997
GB/T 3820-1997: Determination of thickness of textiles and textile products---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT3820-1997
GB
NATIONAL STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 59.080.30
W 04
Replacing GB 3820-1983
Determination of thickness of textiles and textile products
Issued on. OCTOBER 9, 1997
Implemented on. MAY 1, 1998
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People’s Republic of China
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative references... 4
3 Definitions... 4
4 Principle... 5
5 Equipment... 5
6 Atmospheres for conditioning and testing... 6
7 Sampling and preparation of samples... 6
8 Test procedures... 7
9 Expression of results... 8
10 Test report... 8
Annex A (Normative) Determination and measuring device of bulky textiles. 10
Foreword
This Standard is the revision of GB 3820-83 Determination of thickness of
woven and knitted fabrics. The revision of this Standard is equivalent to the
latest edition of the International Standard ISO 5084.1996 Textiles -
Determination of thickness of textiles and textile products. The technical
contents and parameters are consistent with ISO 9073.2.1995 Textiles - Test
methods for nonwovens - Part 2.Determination of thickness and ISO
9863.1990 Geotextiles - Determination of thickness at specified pressures. The
revised standard is the general standard for the determination of thickness of
textiles and textile products.
Compared with the 1983 version of the standard, this Standard is mainly
modified as follows.
1.CHANGE the standard title into Determination of thickness of textiles and
textile products.
2.EXPAND the scope of application to various types of textiles and textile
products.
3.ADD the classification and definition of textiles to facilitate the preparation
and application.
4.MAKE major modifications on presser foot area, pressure and number of
tests, and SPECIFY the specific parameters of several categories of
products.
5.ADD the contents of coefficient of variation CV (%) and confidence interval
for calculated thickness.
Annex A of this Standard is a normative annex.
This Standard was first released in March 1983, and was first revised in 1997.
This Standard substitutes GB 3820-83 from the date of entry into force.
This Standard was proposed by the China Textile General Association.
This Standard shall be under the jurisdiction of the Basic Standard
Subcommittee of the National Technical Committee for Standardization of
Textiles.
The Standardization Research Institute of China Textile General Association is
responsible for drafting this Standard.
Main drafters of this Standard. Wang Baojun and Guo Yue.
Determination of thickness of
textiles and textile products
1 Scope
This Standard specifies the method for determination of thickness of textiles
under specified pressure.
This Standard is applicable to all types of textiles and textile products.
2 Normative references
The provisions in the following standards become the provisions of this
Standard through reference in this Standard. At the time of publication of this
Standard, the editions shown are valid. All standards will be revised and the
parties using this Standard shall explore the possibility of using the latest
editions of the following standards.
GB 6529-86 Standard atmospheres for textiles conditioning and testing
GB 8170-87 Rules for rounding off of numerical values
GB/T 19022.1-1994 Quality assurance requirements for measuring
equipment - Part 1.Metrological confirmation system for measuring
equipment (idt ISO 10012.1.1992)
3 Definitions
The following definitions are applicable to this Standard.
3.1 Thickness of a textile
It refers to the vertical distance between the two reference plates that apply the
specified pressure to the textiles.
3.2 Bulky textiles
It refers to the textiles with a thickness variation (compression ratio) of greater
than or equal to 20% when the pressure applied to the textiles increases from
0.1kPa to 0.5kPa, such as artificial furs, plush, velvet, nonwoven interlinings,
etc.
4 Principle
The sample is placed on a reference plate and is parallel to the presser foot of
this plate.
5 Equipment
5.1 Thickness meter
The thickness meter shall be conducted with metrological confirmation in
accordance with GB/T 19022.1.The thickness meter shall include (or have) the
following components.
5.1.2 Reference plate The surface shall be flat. The diameter shall be at
least 50mm greater than the presser foot (5.1.1).
5.1.3 Presser foot moving device [the direction of movement is perpendicular
to the reference plate (5.1.2) surface] The working surface of the presser foot
can be maintained horizontally and parallel to the surface of the reference plate
(5.1.2) with a non-parallelism of less than 0.2%. In addition, the specified
pressure can be applied to the sample placed above the reference plate.
6 Atmospheres for conditioning and testing
The standard atmospheres for sample conditioning and testing shall be in
accordance with the provisions of GB 6529.Class II standard atmosphere shall
apply. Class III standard atmosphere can be used in the conventional tests.
7 Sampling and preparation of samples
7.1 Sample collection
The methods for sample collection and the quantity of the samples collected
are in accordance with product standards. If they fail to be specified in detail in
the product standards, the method agreed by the parties concerned that is of
interest to the test results shall apply.
7.2 Test pieces
7.3 Conditioning
Before the test, the samples or test pieces shall realize conditioning equilibrium
in a relaxed state in the atmosphere specified in Chapter 6.The conditioning
method and requirements shall be in accordance with GB 6529.
8 Test procedures
8.1 SELECT the presser foot (5.1.1) according to the sample type in Table 1.
For the samples whose surfaces are of uneven pattern structure, the diameter
of the presser foot shall not be less than the length of the pattern cycle. The
smaller presser foot can be used to respectively determine and report the
thickness of the concave and convex parts, if necessary.
8.3 RAISE the presser foot to place the test piece without tension and
deformation on a reference plate.
8.4 PRESS the presser foot gently on the test piece, and MAINTAIN a
constant pressure (SEE Subclause 8.2). READ the thickness indicating value
after a specified time (Table 1).
8.5 REPEAT the procedures in Subclauses 8.3 to 8.4 until the specified
number of parts or each test piece has been measured.
9 Expression of results
CALCULATE the arithmetic mean valuet (rounded off to 0.01mm), coefficient
of variation CV (%) (rounded off to 0.1%) and 95% of the confidence interval (t
± ᇞt) (rounded off to 0.01mm) of the thicknesses measured in Chapter 8.The
methods for rounding off shall be in accordance with the provisions of GB 8170.
10 Test report
The report shall include the following information.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 3820-1997 be delivered?Answer: The full copy PDF of English version of GB/T 3820-1997 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 3820-1997_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3820-1997_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 3820-1997 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 3820-1997?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3820-1997 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 3820-1997?A step-by-step guide to download PDF of GB/T 3820-1997_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 3820-1997".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |