GB/T 37869.4-2019 PDF English
US$114.00 · In stock · Download in 9 secondsGB/T 37869.4-2019: Glass containers -- Vacuum lug finishes -- Part 4: 3 leads 38 medium Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 37869.4-2019 | English | 114 |
Add to Cart
|
3 days
|
Glass containers -- Vacuum lug finishes -- Part 4: 3 leads 38 medium
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 37869.4-2019
GB/T 37869.4-2019: Glass containers -- Vacuum lug finishes -- Part 4: 3 leads 38 medium---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT37869.4-2019
Glass containers - Vacuum lug finishes - Part 4. 3 leads 38 medium
ICS 55.100
Y22
National Standards of People's Republic of China
Glass container vacuum flange bottle mouth
Part 4. Three-spin 38 medium specification
(ISO 9100-4.2005, Glasscontainers-Vacuumlugfinishes-
Part 4. 38medium, IDT)
Published on.2019-08-30
2020-03-01 implementation
State market supervision and administration
China National Standardization Administration issued
Foreword
GB/T 37869 "glass container vacuum flange bottle mouth" is divided into the following parts.
--- Part 1. General;
--- Part 2. Three-spindle 33 medium specification;
--- Part 3. Three-spin 38 general specifications;
--- Part 4. Three-spin 38 medium size;
--- Part 5. Four-rotation 43 and 48 common specifications;
--- Part 6. Four-rotor 53 and 58 common specifications;
--- Part 7. Four-rotation 58 deep specification;
--- Part 8. Four-rotation 63, 66 and 70 common specifications;
--- Part 9. Four-rotation 63, 66 and 70 deep specifications;
--- Part 10. Six-rotation 77 common specifications;
--- Part 11. Six-rotation 82 common specifications;
--- Part 12. Six-spin 89 common specifications;
--- Part 13. Six-rotation 100 common specifications;
--- Part 14. Eight-spin 110 general specifications.
This part is the fourth part of GB/T 37869.
This part is drafted in accordance with the rules given in GB/T 1.1-2009.
This section uses the translation method equivalent to ISO 9100-4.2005 "glass container vacuum flange bottle mouth part 4. 38 medium gauge
grid".
The documents of our country that have a consistent correspondence with the international documents referenced in this part are as follows.
---GB/T 1804-2000 General tolerances No tolerances for linear and angular dimensions (eqvISO 2768-1.1989).
This section has made the following editorial changes.
--- According to the usage habits, the standard name was changed to "glass container vacuum flange bottle mouth part 4. three-spin 38 medium specification";
--- This section incorporates the technical errata content of ISO 9100-4.2005/Cor.1.2009. The terms of these errata contents are
The vertical double line (‖) in the outer margin of the margin is marked.
This part was proposed by the China Light Industry Federation.
This part is under the jurisdiction of the National Daily Glass Standardization Technical Committee (SAC/TC377).
This section drafted by. Donghua University, the national glasses glass enamel product quality supervision and inspection center, Pinghu City product quality supervision and inspection
, Shanghai glasses glass enamel product quality supervision and inspection station, the national daily glass enamel standardization center.
The main drafters of this section. Wu Jiaxu, Xu Xiaojian, Wu Weihua, Dai Qi, Wang Helan, Guo Lin, Gong Miao, Xu Zhangqian.
Glass container vacuum flange bottle mouth
Part 4. Three-spin 38 medium specification
1 Scope
This part of GB/T 37869 specifies the dimensions of a 38mm medium gauge vacuum three-screw flange finish for wide-mouth glass containers.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
ISO 2768-1 General tolerances Part 1. Tolerances to linear and angular dimensions without tolerances (Generaltolerances-
Part 1. Tolerancesforlinearandangulardimensionswithoutindividualtoleranceindications)
3 size
3.1 bottle mouth
The design and dimensions of the bottle mouth are shown in Figure 1, Figure 2 and Table 1.
3.2 Unspecified details
Details not specified should be determined according to the actual application. General tolerances are detailed in ISO 2768-1.
GB/T 37869.4-2019
Glass containers - Vacuum lug finishes - Part 4. 3 leads 38 medium
ICS 55.100
Y22
National Standards of People's Republic of China
Glass container vacuum flange bottle mouth
Part 4. Three-spin 38 medium specification
(ISO 9100-4.2005, Glasscontainers-Vacuumlugfinishes-
Part 4. 38medium, IDT)
Published on.2019-08-30
2020-03-01 implementation
State market supervision and administration
China National Standardization Administration issued
Foreword
GB/T 37869 "glass container vacuum flange bottle mouth" is divided into the following parts.
--- Part 1. General;
--- Part 2. Three-spindle 33 medium specification;
--- Part 3. Three-spin 38 general specifications;
--- Part 4. Three-spin 38 medium size;
--- Part 5. Four-rotation 43 and 48 common specifications;
--- Part 6. Four-rotor 53 and 58 common specifications;
--- Part 7. Four-rotation 58 deep specification;
--- Part 8. Four-rotation 63, 66 and 70 common specifications;
--- Part 9. Four-rotation 63, 66 and 70 deep specifications;
--- Part 10. Six-rotation 77 common specifications;
--- Part 11. Six-rotation 82 common specifications;
--- Part 12. Six-spin 89 common specifications;
--- Part 13. Six-rotation 100 common specifications;
--- Part 14. Eight-spin 110 general specifications.
This part is the fourth part of GB/T 37869.
This part is drafted in accordance with the rules given in GB/T 1.1-2009.
This section uses the translation method equivalent to ISO 9100-4.2005 "glass container vacuum flange bottle mouth part 4. 38 medium gauge
grid".
The documents of our country that have a consistent correspondence with the international documents referenced in this part are as follows.
---GB/T 1804-2000 General tolerances No tolerances for linear and angular dimensions (eqvISO 2768-1.1989).
This section has made the following editorial changes.
--- According to the usage habits, the standard name was changed to "glass container vacuum flange bottle mouth part 4. three-spin 38 medium specification";
--- This section incorporates the technical errata content of ISO 9100-4.2005/Cor.1.2009. The terms of these errata contents are
The vertical double line (‖) in the outer margin of the margin is marked.
This part was proposed by the China Light Industry Federation.
This part is under the jurisdiction of the National Daily Glass Standardization Technical Committee (SAC/TC377).
This section drafted by. Donghua University, the national glasses glass enamel product quality supervision and inspection center, Pinghu City product quality supervision and inspection
, Shanghai glasses glass enamel product quality supervision and inspection station, the national daily glass enamel standardization center.
The main drafters of this section. Wu Jiaxu, Xu Xiaojian, Wu Weihua, Dai Qi, Wang Helan, Guo Lin, Gong Miao, Xu Zhangqian.
Glass container vacuum flange bottle mouth
Part 4. Three-spin 38 medium specification
1 Scope
This part of GB/T 37869 specifies the dimensions of a 38mm medium gauge vacuum three-screw flange finish for wide-mouth glass containers.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
ISO 2768-1 General tolerances Part 1. Tolerances to linear and angular dimensions without tolerances (Generaltolerances-
Part 1. Tolerancesforlinearandangulardimensionswithoutindividualtoleranceindications)
3 size
3.1 bottle mouth
The design and dimensions of the bottle mouth are shown in Figure 1, Figure 2 and Table 1.
3.2 Unspecified details
Details not specified should be determined according to the actual application. General tolerances are detailed in ISO 2768-1.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 37869.4-2019 be delivered?Answer: The full copy PDF of English version of GB/T 37869.4-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 37869.4-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 37869.4-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 37869.4-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 37869.4-2019?A step-by-step guide to download PDF of GB/T 37869.4-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 37869.4-2019".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|