GB/T 37596-2019 PDF English
US$150.00 · In stock · Download in 9 secondsGB/T 37596-2019: Magnesium Alloy Forgings for Aerospace Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 37596-2019 | English | 150 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Magnesium Alloy Forgings for Aerospace
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 37596-2019
GB/T 37596-2019: Magnesium Alloy Forgings for Aerospace---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT37596-2019
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.150.10
H 61
Magnesium Alloy Forgings for Aerospace
ISSUED ON: JUNE 04, 2019
IMPLEMENTED ON: MAY 01, 2020
Issued by: State Administration for Market Regulation;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Requirements ... 5
4 Test Methods ... 8
5 Inspection Rules ... 9
6 Marking, Package, Transportation, Storage and Quality Certificate ... 11
7 Contract (or Order Form) Contents ... 13
Magnesium Alloy Forgings for Aerospace
1 Scope
This Standard specifies the requirements, test methods, inspection rules, markings,
package, transportation, storage, quality certificate, and ordering forms (or contracts)
of the magnesium alloy forgings for aerospace.
This Standard is applicable to the magnesium alloy die forgings and free forgings
(hereinafter referred to as forgings) for aerospace.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this document.
GB/T 231.1 Metallic Materials--Brinell Hardness Test - Part 1: Test Method
GB/T 4297 Magnesium Alloy Wrought Products – Macrostructure - Inspection
Method
GB/T 5153 Designation and Composition of Wrought Magnesium and Magnesium
Alloys
GB/T 6519 Process for Ultrasonic Inspection of Wrought Aluminum Alloy Products
GB/T 8170 Rules of Rounding off for Numerical Values & Expression and
Judgement of Limiting Values
GB/T 13748 (all parts) Chemical Analysis Methods of Magnesium and Magnesium
Alloys
GB/T 16865 Test Pieces for Tensile Test for Wrought Aluminum and Magnesium
Alloy Products
GB/T 32792 Packaging, Marking, Transportation and Storage of Magnesium Alloy
Processing Products
3.7.1 The oxide film on the fracture of the forgings shall conform to the provisions of
Table 3.
3.7.2 The fractograph of forgings shall be free of flux slag and the segregation defects
of the compounds specified in Tables 4 and 5.
3.8 Ultrasonic flow detection
When forgings have ultrasonic testing requirements, they shall be determined by
through the negotiation between the supplier and the purchaser, and indicated in the
order form (or contract).
3.9 Appearance quality
3.9.1 The surface of the forgings shall be smooth and clean. The surface of finished
forgings shall be oxidized. The oxide layer shall be intact; exposing no base metal, no
falling off. After oxidization, the oiling protection is required.
3.9.2 The cracks and folds on the surface of the to-be-machined forgings shall be
removed. Peeling, bubbles, bumps, indentations and other defects allow for being
inspected and removed; their depths shall be confirmed. The parts removing or non-
removing the defects shall ensure one-half nominal machining allowance for forgings.
3.9.3 The non-machined surface of the die forgings shall be free of folding, peeling,
bumps, rough scars, and the like defects; however, the supplier is allowed to remove
the existing defects; the removal parts shall be smoothly transited; the parts removing
the defects shall ensure the one-sided limit size of the die forgings.
4 Test Methods
4.1 Chemical compositions
4.1.1 The arbitration analysis for the chemical compositions of the forgings shall be
conducted as per the method specified in GB/T 13748.
4.1.2 The judgment of analytical value shall adopt the round-off comparison method.
The rules for numerical rounding-off shall be conducted as per the provisions of GB/T
8170; the rounding-off digits shall be consistent with the limit digits specified in GB/T
5153.
4.2 Size deviation
4.2.1 The shape and size of free forgings shall be measured by the calipers, steel
rulers, tape or the measuring gauges with the corresponding accuracy.
4.2.2 The size and deviation of die forgings shall be measured by scribing method, the
5.5.3 When the Brinell hardness of any specimen is unqualified, it is allowed to cut
double number of samples on the adjacent portion or another forging for reinspection.
If the reinspection results are totally qualified, then such batch (furnace) of products
are judged to be qualified. If the reinspection results still have the unqualified samples,
then such batch (furnace) of products are judged to be unqualified. When the supplier
is allowed to inspect the products piece by piece through the negotiation between the
supplier and the purchaser, the qualified ones shall be delivered.
5.5.4 When the tensile mechanical properties at room temperature of any specimen is
unqualified, it is allowed to cut double number of samples on the adjacent portion or
another forging for reinspection. If the reinspection results are totally qualified, then
such batch (furnace) of products are judged to be qualified. If the reinspection results
still have the unqualified samples, then such batch (furnace) of products are judged to
be unqualified. When the supplier is allowed to inspect the products piece by piece
through the negotiation between the supplier and the purchaser, the qualified ones
shall be delivered.
5.5.5 When the macrostructure of any specimen is unqualified, it shall be judged as
follows:
a) If the products are unqualified due to looseness, cracks, non-metallic inclusions,
flux slag, oxide film and segregation of metal compounds, such batch of products
shall be rejected.
b) If there is difference between the macrostructure flow line and standard sample,
or if the vortex flow and across flow are unqualified, the supplier is allowed to
take another double number of samples for reinspection; if the reinspection is
qualified, then such batch of forgings are qualified. If any sample is unqualified
in the reinspection, then such batch shall be judged to be unqualified.
5.5.6 When the fractograph of any specimen is unqualified, then such batch (melting-
number) shall be judged to be unqualified.
5.5.7 When the ultrasonic flaw detection of any forging is unqualified, then such piece
of forging shall be judged to be unqualified.
5.5.8 When the appearance quality of any forging is unqualified, then such piece of
forging shall be judged to be unqualified.
6 Marking, Package, Transportation, Storage and
Quality Certificate
6.1 Marking
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 37596-2019 be delivered?Answer: The full copy PDF of English version of GB/T 37596-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 37596-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 37596-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 37596-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 37596-2019?A step-by-step guide to download PDF of GB/T 37596-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 37596-2019".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|